Wyniki wyszukiwania

Wynik wyszukiwania

1/121
Nr opisu: 0000101062
Influence of thermo-mechanical treatments on structure and mechanical properties of high-Mn steel.
[Aut.]: Leszek** Dobrzański, Wojciech Borek, Janusz Mazurkiewicz.
W: Recent Trends in Structural Materials. Selected, peer reviewed papers from the 3rd International Conference COMAT, Czech Republic, Pilsen, November 19-21, 2014. Eds. Jan Dzugan, Zbysek Novy. Staffa-Zurich : Trans Tech Publications, 2015, s. 113-120 (Advanced Materials Research ; vol. 1127 1662-8985)

2/121
Nr opisu: 0000101060
Mechanical properties and wear resistance of pm composite materials reinforced with the halloysite particles.
[Aut.]: Leszek** Dobrzański, Błażej Tomiczek, Wojciech Pakieła, Anna Tomiczek.
W: Recent Trends in Structural Materials. Selected, peer reviewed papers from the 3rd International Conference COMAT, Czech Republic, Pilsen, November 19-21, 2014. Eds. Jan Dzugan, Zbysek Novy. Staffa-Zurich : Trans Tech Publications, 2015, s. 107-112 (Advanced Materials Research ; vol. 1127 1662-8985)

3/121
Nr opisu: 0000109376
Recent trends in structural materials. Selected, peer reviewed papers from the 3rd International Conference COMAT, Czech Republic, Pilsen, November 19-21, 2014. Eds. Jan Dzugan, Zbysek Novy.
Staffa-Zurich : Trans Tech Publications, 2015, 154 s.
(Advanced Materials Research ; vol. 1127 1860-949X)
Publikacja nie należy do bibliografii Uczelni

4/121
Nr opisu: 0000093673
418V side dump car introduction: wall opening simulation and further research.
[Aut.]: Andrzej Wróbel, Piotr* Musiał, Aleksander Olszewski, Daria* Bajda, Martyna Poręba.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 614-618 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

SIEMENS NX ; symulacja ruchu ; CAD ; wagon samowyładowczy bocznozsypny

SIEMENS NX ; motion simulation ; CAD ; side-dump car

5/121
Nr opisu: 0000093784
A methodology of CAPP/CAP systems integration based on a product intermediate state representation.
[Aut.]: Cezary Grabowik, Krzysztof Kalinowski, Wojciech Kempa, Iwona Paprocka.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 915-920 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

CAP ; CAPP ; cechy konstrukcyjne ; cechy produkcji

CAP ; CAPP ; design features ; manufacturing features ; product intermediate state representation

6/121
Nr opisu: 0000093776
A new procedure of production orders sequencing in mixed-model production systems.
[Aut.]: M. Zemczak, Damian Krenczyk.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 864-868 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

montaż ; podejmowanie decyzji ; harmonogramowanie ; sekwencjonowanie ; system produkcji mixed-model

assembly ; decision making ; scheduling ; sequencing ; mixed-model production system

7/121
Nr opisu: 0000093778
A production scheduling model with maintenance.
[Aut.]: Iwona Paprocka, Wojciech Kempa, Krzysztof Kalinowski, Cezary Grabowik.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 885-890 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

analiza skutków ; tryb awaryjny ; terminarz konserwacji ; średni czas do uszkodzenia ; MTTF ; całkowita efektywność urządzeń ; predykcyjne szeregowanie zadań ; funkcja niezawodności

effects analysis ; failure mode ; maintenance scheduling ; mean time to failure ; MTTF ; overall equipment effectiveness ; predictive scheduling ; reliability function

8/121
Nr opisu: 0000097037
A structure and morphology of nanocomposites composed of carbon nanotubes with a varying fraction of platinum nanoparticles.
[Aut.]: Anna* Dobrzańska-Danikiewicz, Mirosława Pawlyta, Dariusz Łukowiec.
W: Advances in materials and processing technologies XVI. Selected, peer reviewed papers from the 16th International Conference on Advanced Materials and Processing Technologies (AMPT 2013), September 22-26, 2013, Taipei, Taiwan. Ed. by Zone-Ching Lin, You-Min Huang and Liang-Kuang Chen. Staffa-Zurich : Trans Tech Publications, 2014, s. 3-10 (Advanced Materials Research ; vol. 939 1662-8985). Punktacja MNiSW 7.000

materiały nanokompozytowe ; nanocząstka platyny ; SEM ; TEM ; STEM ; XRD

nanocomposite materials ; platinum nanoparticle ; SEM ; TEM ; STEM ; XRD

9/121
Nr opisu: 0000088751
A survey on capp systems development methods.
[Aut.]: Cezary Grabowik, Krzysztof Kalinowski, Wojciech Kempa, Iwona Paprocka.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 387-392 (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

CAPP ; system generatywny ; technologia grupowa ; klasyfikacja części ; system semigeneratywny ; system wariantowy

CAPP ; generative system ; group technology ; part classification ; semi generative system ; variant system

10/121
Nr opisu: 0000088722
Abrasive wear of fibre-metal composites based on fibreglass woven fabric layer.
[Aut.]: Sławomir Żółkiewski.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 290-295, bibliogr. 26 poz. (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

zużycie ścierne ; materiały kompozytowe ; laminat metalowo-włóknisty ; włókno szklane ; własności mechaniczne

abrasive wear ; composite materials ; fibre-metal laminate ; glass fibre ; mechanical properties

11/121
Nr opisu: 0000110844
Advances in materials and processing technologies XVI. Selected, peer reviewed papers from the 16th International Conference on Advanced Materials and Processing Technologies (AMPT 2013), September 22-26, 2013, Taipei, Taiwan. Ed. by Zone-Ching Lin, You-Min Huang and Liang-Kuang Chen.
Staffa-Zurich : Trans Tech Publications, 2014, 691 s.
(Advanced Materials Research ; vol. 939 1662-8985)
Publikacja nie należy do bibliografii Uczelni

12/121
Nr opisu: 0000093724
Agent-based systems approach for robotic workcell integration.
[Aut.]: Agnieszka Sękala, Aleksander Gwiazda, Wacław Banaś.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 721-725 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

system agentowy ; robot ; komórka zrobotyzowana ; integracja systemu

agent-based system ; robot ; robotic cell ; system integration

13/121
Nr opisu: 0000093780
An attempt to application of chain codes for design similarity evaluation.
[Aut.]: Cezary Grabowik, Krzysztof Kalinowski, Iwona Paprocka, Wojciech Kempa.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 897-902 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

CAPP ; kod łańcuchowy ; podobieństwo projektowe ; technologia grupowa ; system wariantowy ; minimalna odległość edycyjna

CAPP ; chain code ; design similarity ; group technology ; minimum edit distance ; variant system

14/121
Nr opisu: 0000088742
Analysis of simulated welding thermal cycles S700MC using thermal imaging camera.
[Aut.]: Jacek Górka.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 375-380 (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

strefa wpływu ciepła ; termowizja ; TMCP ; warunki cieplne spawania

heat affected zone ; thermovision ; TMCP ; welding thermal cycle

15/121
Nr opisu: 0000096671
Analysis of the ductile iron production on the steel scrap base.
[Aut.]: Krzysztof Janerka, Jan Jezierski, Dariusz Bartocha, Jan Szajnar.
W: Material research and applications. International Conference on Advanced Material and Manufacturing Science (ICAMMS 2012), Beijing, 20-21 December 2012. Ed. by D. Li, D. Zheng, J. Shi. Staffa-Zurich : Trans Tech Publications, 2014, s. 1392-1396, bibliogr. 7 poz. (Advanced Materials Research ; vol. 875-877 1662-8985). Punktacja MNiSW 7.000

16/121
Nr opisu: 0000093789
Application of functional features to the description of technical means conception.
[Aut.]: Krzysztof Herbuś, Piotr Ociepka, Aleksander Gwiazda.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 1001-1004 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

pomysł ; proces projektowanie-konstruowanie-produkcja ; metoda cech funcjonalnych ; system ; środki techniczne

conception ; design-constructional-manufacturing process ; functional features method ; system ; technical mean

17/121
Nr opisu: 0000093792
Application of the method basing on engineering knowledge and experience for adding the hexapod design process.
[Aut.]: Piotr Ociepka, Krzysztof Herbuś, Aleksander Gwiazda.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 1005-1010 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

proces projektowy ; doświadczenie ; wiedza ; hexapod

design process ; experience ; knowledge ; hexapod

18/121
Nr opisu: 0000093758
Automatic generation method of simulation model for production planning and simulation systems integration.
[Aut.]: Damian Krenczyk.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 825-829 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

problem spełnienia ograniczeń ; integracja ; system produkcyjny ; modelowanie ; planowanie produkcji ; symulacja ; XML ; XSLT

constraint satisfaction problem ; integration ; manufacturing system ; modelling ; production planning ; simulation ; XML ; XSLT

19/121
Nr opisu: 0000093612
Changes in the structure and properties of the steel S700MC by heat treatment.
[Aut.]: Jacek Górka.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 111-116 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

obróbka cieplna ; własności mechaniczne ; stal S700MC ; TMCP

heat treatment ; mechanical properties ; S700MC steel ; TMCP

20/121
Nr opisu: 0000093631
Characteristics of hybrid coating deposited by PVD and PACVD process.
[Aut.]: Krzysztof Lukaszkowicz, Justyna* Wiśniewska, Agnieszka* Paradecka, Paulina Boryło.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 225-229 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

powłoka AlTiCrN ; powłoka DLC ; HRTEM ; SEM ; właściwości tribologiczne

AlTiCrN film ; DLC film ; HRTEM ; SEM ; tribological properties

21/121
Nr opisu: 0000110182
Cladding of inconel 625+WC composite coatings using a direct diode laser.
[Aut.]: Damian Janicki.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 212-217, bibliogr. 22 poz. (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

zużycie erozyjne ; laser diodowy dużej mocy z bezpośrednią transmisją wiązki ; Inconel 625 ; napawanie laserowe ; kompozyt z osnową metaliczną ; MMC ; węglik wolframu

erosive wear ; high power direct diode laser ; Inconel 625 ; laser cladding ; metal matrix composite ; MMC ; tungsten carbide

22/121
Nr opisu: 0000092442
Comparison experimental tests of behavior of the slab-column structure after removal of the corner support with simplified models describing the mechanism of destruction.
[Aut.]: Mirosław Wieczorek.
W: Structural and physical aspects of civil engineering. Selected, peer reviewed papers from the 2nd International Conference on Structural and Physical Aspects of Civil Engineering (SPACE-2013), High Tatras, Slovakia, November 27-29, 2013. Ed. K. Kotrasova, E. Kormanikova. Staffa-Zurich : Trans Tech Publications, 2014, s. 78-84, bibliogr. 17 poz. (Advanced Materials Research ; vol. 969 1662-8985). Punktacja MNiSW 7.000

żelbet ; katastrofa postępująca ; stan awaryjny ; budowa płyty

reinforced concrete ; progressive collapse ; failure stage ; slab structure ; ultimate limit theory of slabs

23/121
Nr opisu: 0000093616
Comparison of long-term ageing duration of binary Ag-Cu alloys.
[Aut.]: Krzysztof Labisz.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 128-133 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

materiał monety ; dodatek miedzi ; starzenie długoterminowe ; mikrostruktura ; mennica ; obróbka plastyczna ; stop srebra

coin material ; copper addition ; long-term ageing ; microstructure ; mint ; plastic forming ; silver alloy

24/121
Nr opisu: 0000093983
Computer aided analysis of systems with MFC actuators.
[Aut.]: Marek Płaczek.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 711-714 (Advanced Materials Research ; vol. 1036 1662-8985)

analiza ; metoda elementów skończonych ; przetwornik MFC ; modelowanie ; symulacja

analysis ; finite element method ; MFC transducer ; modelling ; simulation

25/121
Nr opisu: 0000093787
Computer aided design and analysis of composite structure.
[Aut.]: Michał* Majzner, Andrzej Baier.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 989-994 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

kompozyty ; metoda oparta na cechach konstrukcyjnych ; metoda elementów skończonych ; MES ; modelowanie

composites ; feature based method ; finite element method ; FEM ; modelling

26/121
Nr opisu: 0000093709
Computer aided process of designing the mechatronic Silesian Greenpower electric car.
[Aut.]: Andrzej Baier, M. Baier, Michał Sobek, Łukasz Grabowski, Dawid* Dusik, Piotr* Papaj.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 674-679 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

CFD ; hamownia silnikowa ; metoda elementów skończonych ; MES ; samochód rajdowy ; Silesian Greenpower

CFD ; engine test stand ; finite element method ; FEM ; race car ; Silesian Greenpower

27/121
Nr opisu: 0000093725
Conception of the integration of the virtual robot model with the control system.
[Aut.]: Krzysztof Herbuś, Piotr Ociepka, Aleksander Gwiazda.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 732-736 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

system CAD ; układ sterowania ; integracja ; model ; rzeczywistość wirtualna

CAD system ; control system ; integration ; model ; virtual reality

28/121
Nr opisu: 0000093729
Concepts of flexible production line, on the example of robotic cell.
[Aut.]: Wacław Banaś, Agnieszka Sękala.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 749-754 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

produkcja elastyczna ; planowanie produkcji ; rekonfiguracja ; robot

flexible production ; production planning ; reconfiguration ; robot

29/121
Nr opisu: 0000093669
Control of vibration of mechanical systems using electrical subsystems.
[Aut.]: Katarzyna Białas, Andrzej Buchacz, D. Gałęziowski.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 523-528 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

element aktywny ; analiza ; element pasywny ; redukcja drgań ; synteza

active element ; analysis ; passive element ; reduction of vibrations ; synthesis

30/121
Nr opisu: 0000088762
Controlling the movement of the robot's effector on the plane using the SVG markup language.
[Aut.]: Krzysztof Foit.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 577-581 (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

język znaczników ; programowanie ; robot ; robotyka ; symulacja

markup language ; programming ; robot ; robotics ; simulation

31/121
Nr opisu: 0000093779
Databases model for determining of technological features based on the theory of technological similarity.
[Aut.]: Rafał Rząsiński.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 891-896 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

CAD/CAM ; baza danych ; projekt technologiczny ; teoria podobieństwa

CAD/CAM ; database ; technological design ; theory of similarity

32/121
Nr opisu: 0000093671
Design of the roof support with strait-line mechanism.
[Aut.]: Aleksander Gwiazda.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 553-558 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

analiza CAD/MES ; proces projektowy ; hydrauliczna podpora stropu

CAD/MES analysis ; design process ; hydraulic roof support

33/121
Nr opisu: 0000091377
Electrospark alloying of carbon steel with WC-Co-Al₂O₃: deposition technique and coating properties.
[Aut.]: N. Radek, A. Sladek, J. Broncek, I. Bilska, Agnieszka Szczotok.
W: Terotechnology. Selected, peer reviewed papers from the 8th International Conference on Terotechnology, Kielce, Poland, September 26-27, 2013. Eds.: Agnieszka Szczotok, J. Pietraszek, N. Radek, A. Gądek-Moszczak. Durnten-Zurich : Trans Tech Publications, 2014, s. 101-106, bibliogr. 19 poz. (Advanced Materials Research ; vol. 874 1662-8985). Punktacja MNiSW 7.000

obróbka elektroiskrowa ; elektroda ; powłoka

electrospark alloying ; electrode ; coating

34/121
Nr opisu: 0000088720
Estimation of reliability characteristics in a production scheduling model with failures and time-changing parameters described by gamma and exponential distributions.
[Aut.]: Wojciech Kempa, Iwona Paprocka, Krzysztof Kalinowski, Cezary Grabowik.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 116-121 (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

rozkład gamma ; terminarz konserwacji ; średni czas pomiędzy awariami ; średni czas do momentu wystąpienia pierwszej awarii ; funkcja niezawodności ; funkcja odnowy

gamma distribution ; maintenance scheduling ; mean time between failures ; mean time to first failure ; reliability function ; renewal function

35/121
Nr opisu: 0000091199
Evaluation of the state for the material of the live steam superheater pipe coils of V degree.
[Aut.]: K. Trzewiczek, Agnieszka Szczotok, A. Gądek-Moszczak.
W: Terotechnology. Selected, peer reviewed papers from the 8th International Conference on Terotechnology, Kielce, Poland, September 26-27, 2013. Eds.: Agnieszka Szczotok, J. Pietraszek, N. Radek, A. Gądek-Moszczak. Durnten-Zurich : Trans Tech Publications, 2014, s. 35-42, bibliogr. 20 poz. (Advanced Materials Research ; vol. 874 1662-8985). Punktacja MNiSW 7.000

10CrMo9-10 ; degradacja ; przegrzewacz pary ; wężownica

10CrMo9-10 ; degradation ; steam superheater ; pipe coil

36/121
Nr opisu: 0000093649
Experimental and numerical study of heat conditions during diode laser gas nitriding of titanium alloy.
[Aut.]: Aleksander Lisiecki.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 320-325 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

laser diodowy ; warunki cieplne ; przepływ ciepła ; azotowanie laserowe ; kompozyt z osnową metaliczną ; Ti6Al4V ; stop tytanu ; konwekcja jeziorka ciekłego metalu

diode laser ; heat conditions ; heat transfer ; laser nitriding ; metal matrix composite ; Ti6Al4V ; titanium alloy ; weld pool convection

37/121
Nr opisu: 0000092460
Experimental tests for the analysis of the load-bearing capacity of an internal slab-column connection after its punching at various positions of the column.
[Aut.]: Barbara Wieczorek.
W: Structural and physical aspects of civil engineering. Selected, peer reviewed papers from the 2nd International Conference on Structural and Physical Aspects of Civil Engineering (SPACE-2013), High Tatras, Slovakia, November 27-29, 2013. Ed. K. Kotrasova, E. Kormanikova. Staffa-Zurich : Trans Tech Publications, 2014, s. 169-175, bibliogr. 13 poz. (Advanced Materials Research ; vol. 969 1662-8985). Punktacja MNiSW 7.000

konstrukcja żelbetowa ; połączenie płyta-słup ; przebicie ; katastrofa postępująca ; dwukierunkowe wzmocnienie integralności strukturalnej płyty ; badanie eksperymentalne

reinforced concrete structure ; slab-column connection ; punching ; progressive collapse ; two-way slabs structural integrity reinforcement ; experimental research

38/121
Nr opisu: 0000091386
Factorial approach to assessment of GPU computational efficiency in surrogate models.
[Aut.]: J. Pietraszek, Agnieszka Szczotok, E. Kocyłowska.
W: Terotechnology. Selected, peer reviewed papers from the 8th International Conference on Terotechnology, Kielce, Poland, September 26-27, 2013. Eds.: Agnieszka Szczotok, J. Pietraszek, N. Radek, A. Gądek-Moszczak. Durnten-Zurich : Trans Tech Publications, 2014, s. 157-162, bibliogr. 23 poz. (Advanced Materials Research ; vol. 874 1662-8985). Punktacja MNiSW 7.000

GPU ; model zastępczy ; projektowanie eksperymentu ; podejście czynnikowe

GPU ; surrogate model ; experiment design ; factorial approach

39/121
Nr opisu: 0000088733
Geometric analysis of motions exercised by the Stewart platform.
[Aut.]: Andrzej Dymarek, Tomasz Dzitkowski, Krzysztof Herbuś, Gabriel Kost, Piotr Ociepka.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 351-356 (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

CAD/CAE ; analiza ruchu ; platforma Stewarta

CAD/CAE ; motion analysis ; Stewart platform

40/121
Nr opisu: 0000093607
High manganese austenitic X6MnSiAlNbTi26-3-3 steel - characteristic, structures and properties.
[Aut.]: Wojciech Borek, Małgorzata* Czaja, Krzysztof Labisz, Tomasz Tański, Mariusz Krupiński, S. Rusz.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 18-23 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

stal wysokomanganowa ; własności mechaniczne ; mechanizm wzmacniający ; struktura ; mechanizm TWIP ; stal TWIP

high manganese steel ; mechanical properties ; strengthening mechanism ; structure ; TWIP mechanism ; TWIP steel

41/121
Nr opisu: 0000093665
High power diode laser application for metals surface treatment based on wear resistance investigation.
[Aut.]: Krzysztof Labisz, Ewa Jonda, Tomasz Tański, Wojciech Borek, Małgorzata* Czaja.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 482-489 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

proszek ceramiczny ; HPDL ; przetapianie laserowe ; spawanie laserowe ; obróbka powierzchni ; odporność na zużycie

ceramic powder ; HPDL ; laser remelting ; laser alloying ; surface treatment ; wear resistance

42/121
Nr opisu: 0000093661
HPDL laser alloying of Al-Si-Cu alloy with ZrO2 powder.
[Aut.]: Krzysztof Labisz, Tomasz Tański, Beata Krupińska, Mariusz Krupiński, Wojciech Pakieła.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 434-439 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

stop aluminium ; ball on plate ; zasilanie lasera ; laserowa obróbka powierzchni ; inżynieria powierzchni ; badanie tribologiczne

aluminium alloy ; ball on plate ; laser feeding ; laser surface treatment ; surface engineering ; tribological test

43/121
Nr opisu: 0000093704
Impact of structural characteristics of flexspline on the stresses occurring at the tooth space bottom.
[Aut.]: Piotr Folęga.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 631-636 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

metoda elementów brzegowych ; koło podatne ; przekładnia falowa ; analiza numeryczna ; stan naprężenia

boundary element method ; flexspline ; harmonic drive ; numerical analysis ; stress state

44/121
Nr opisu: 0000093614
Influence of hot-working conditions on a structure of X11MnSiAl17-1-3 steel.
[Aut.]: Leszek** Dobrzański, Małgorzata* Czaja, Wojciech Borek, Krzysztof Labisz, Tomasz Tański.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 122-127 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

chłodzenie ; stal wysokomanganowa ; walcowanie na gorąco ; odzysk ; rekrystalizacja

cooling ; high manganese steel ; hot rolling ; recovery ; recrystallization

45/121
Nr opisu: 0000093660
Influence of the HPDL surface treatment of the X40CrMoV5-1 tool steel on wear resistance.
[Aut.]: Ewa Jonda, Krzysztof Lukaszkowicz.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 428-433 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

laser diodowy dużej mocy ; stal narzędziowa do pracy na gorąco ; spawanie laserowe ; przetapianie ; obróbka powierzchni

high power diode laser ; hot-work alloy tool steel ; laser alloying ; remelting ; surface treatment

46/121
Nr opisu: 0000093793
Integrated approach to the designing process of complex technical systems.
[Aut.]: Aleksander Gwiazda, Agnieszka Sękala, Zbigniew Monica, Wacław Banaś.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 1023-1027 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

proces projektowy ; podejście integracyjne ; projekt optymalny

design process ; integration approach ; optimal design

47/121
Nr opisu: 0000088764
Integration of a virtual 3D model of a robot manipulator with its tangible model (phantom).
[Aut.]: Krzysztof Herbuś, Gabriel Kost, Daniel* Reclik, Jerzy Świder.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 582-587 (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

interfejs komunikacyjny ; integracja ; fantom ; programowanie robotów ; rzeczywistość wirtualna ; system VR

communication interface ; integration ; phantom ; robot programming ; virtual reality ; VR system

48/121
Nr opisu: 0000093762
Interaction of the decision maker in the process of production scheduling.
[Aut.]: Krzysztof Kalinowski, Cezary Grabowik, Iwona Paprocka, Wojciech Kempa.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 830-833 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

podejmowanie decyzji ; interakcja ; optymalizacja ; harmonogramowanie produkcji ; system harmonogramowania

decision making ; interaction ; optimization ; production scheduling ; scheduling system

49/121
Nr opisu: 0000093630
Laser annealing of 8YSZ powders.
[Aut.]: Andrzej Grabowski, Grzegorz Moskal, Mirosława Kępińska.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 168-171 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

wyżarzanie laserowe ; TBC ; tlenek cyrkonu modyfikowany itrem

laser annealing ; TBC ; zirconium oxide modified with yttrium

50/121
Nr opisu: 0000092461
Load capacity of an internal slab-column connection depending on the geometric parameters of the reinforcement.
[Aut.]: Barbara Wieczorek.
W: Structural and physical aspects of civil engineering. Selected, peer reviewed papers from the 2nd International Conference on Structural and Physical Aspects of Civil Engineering (SPACE-2013), High Tatras, Slovakia, November 27-29, 2013. Ed. K. Kotrasova, E. Kormanikova. Staffa-Zurich : Trans Tech Publications, 2014, s. 234-240, bibliogr. 13 poz. (Advanced Materials Research ; vol. 969 1662-8985). Punktacja MNiSW 7.000

konstrukcja żelbetowa ; połączenie płyta-słup ; przebicie ; katastrofa postępująca ; dwukierunkowe wzmocnienie integralności strukturalnej płyty ; badanie eksperymentalne

reinforced concrete structure ; slab-column connection ; punching ; progressive collapse ; two-way slabs structural integrity reinforcement ; experimental research

51/121
Nr opisu: 0000093658
Loss of aluminium during the process of Ti-Al alloy melting in VIM furnace.
[Aut.]: Beata Oleksiak, Leszek Blacha, Grzegorz Siwiec, Albert Smalcerz.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 422-427 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

parowanie Al ; stop TiAl ; piec VIM

evaporation of Al ; TiAl alloy ; VIM process

52/121
Nr opisu: 0000088768
Market oriented approach to the production management on the operational level.
[Aut.]: Bożena Skołud.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 663-668 (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

problem spełnienia ograniczeń ; system wspomagania decyzji ; zlecenie produkcyjne ; harmonogramowanie

constraint satisfaction problem ; decision support system ; production order ; scheduling

53/121
Nr opisu: 0000108084
Material research and applications. International Conference on Advanced Material and Manufacturing Science (ICAMMS 2012), Beijing, 20-21 December 2012. Ed. by D. Li, D. Zheng, J. Shi.
Staffa-Zurich : Trans Tech Publications, 2014, 2279 s.
(Advanced Materials Research ; vol. 875-877 1662-8985)
Publikacja nie należy do bibliografii Uczelni

54/121
Nr opisu: 0000088743
Mathematical model of the damped variable cross section beam in transportation.
[Aut.]: Sławomir Żółkiewski, Leszek Dziczkowski.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 517-522, bibliogr. 26 poz. (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

układ belkowy ; belka ; równanie ruchu ; zmienny przekrój ; wibracje ; tłumienie

beamlike system ; beam ; equations of motion ; variable cross-section ; vibration ; damping

55/121
Nr opisu: 0000088727
Mechanical properties of fibre-metal composites connected by means of bolt joints.
[Aut.]: Sławomir Żółkiewski.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 296-301, bibliogr. 30 poz. (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

materiały kompozytowe ; włókno szklane ; laminat metalowo-włóknisty ; własności mechaniczne ; własności wytrzymałościowe

composite materials ; fibreglass ; fibre-metal laminate ; mechanical properties ; strength properties

56/121
Nr opisu: 0000093654
Mechanism of laser surface modification of the Ti-6Al-4V alloy in nitrogen atmosphere using a high power diode laser.
[Aut.]: Aleksander Lisiecki.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 411-416 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

laser diodowy ; azotowanie laserowe ; modyfikacja powierzchni ; stop tytanu

diode laser ; laser nitriding ; surface modification ; titanium alloy

57/121
Nr opisu: 0000088766
Methods of manufacturing data acquisition for production management. A review.
[Aut.]: Grzegorz Ćwikła.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 618-623 (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

system automatycznej identyfikacji ; akwizycja danych ; standard MTConnect ; OPC ; monitorowanie produkcji ; programowalny sterownik logiczny ; sterowanie nadzorcze

automatic identification system ; data acquisition ; MTConnect standard ; OPC ; production monitoring ; programmable logic controller ; supervisory control

58/121
Nr opisu: 0000093629
Microstructural characterization of silicide coatings on Mo and TZM alloy.
[Aut.]: Grzegorz Moskal, Lucjan Swadźba, Wacław** Supernak, Marta Mikuśkiewicz, Adrian* Mościcki, Magdalena Jabłońska, Dawid Niemiec, Piotr Kałamarz, Marek Staszewski, A. Wrona, M. Osadnik.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 164-167 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

molibden ; powłoka krzemionkowa ; TZM

molybdenum ; silicide coating ; TZM

59/121
Nr opisu: 0000093727
Mixed reality as a tool supporting programming of the robot.
[Aut.]: Krzysztof Foit.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 737-742 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

poszerzona rzeczywistość ; rzeczywistość mieszana ; programowanie ; robot ; robotyka

augmented reality ; mixed reality ; programming ; robot ; robotics

60/121
Nr opisu: 0000093668
Modelling of an electric circuit's type influence on dynamic flexibility of system with passive vibration damping.
[Aut.]: Marek Płaczek.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 511-516 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

podatność dynamiczna ; pasywne tłumienie drgań ; piezoelektryczność

dynamic flexibility ; passive vibration dumping ; piezoelectricity ; shunt circuit

61/121
Nr opisu: 0000093721
Modelling of cutting force and robot load during machining.
[Aut.]: Grzegorz Gołda, Adrian Kampa.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 715-720 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

szybkie prototypowanie ; siła frezowania

rapid prototyping ; milling force ; robot machining

62/121
Nr opisu: 0000093610
Modelling of hardness prediction of alloyed copper using artificial neural networks applications.
[Aut.]: Jarosław Konieczny, B. Chmielnicki, Błażej Tomiczek.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 52-57 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

sztuczna sieć neuronowa ; walcowanie na zimno ; miedź ; twardość ; obróbka cieplna

artificial neural network ; cold rolling ; copper ; hardness ; heat treatment

63/121
Nr opisu: 0000093701
Modelling of torsional vibrating systems with composite piezoelectric assemblies.
[Aut.]: Marek Płaczek, Andrzej Buchacz, Andrzej Wróbel.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 625-630 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

aktuator ; analiza ; modelowanie ; zespół piezoelektryczny

actuator ; analysis ; modelling ; piezoelectric assembly

64/121
Nr opisu: 0000093672
Modelling the structural steel hardness using genetic programming method.
[Aut.]: A. Papliński, Wojciech Sitek, Jacek Trzaska.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 580-585 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

sztuczna inteligencja ; programowanie genetyczne ; materiałoznawstwo ; modelowanie ; stal

artificial intelligence ; genetic programming ; materials science ; modelling ; steel

65/121
Nr opisu: 0000109166
Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.].
Staffa-Zurich : Trans Tech Publications, 2014, 824 s.
(Advanced Materials Research ; vol. 837 1662-8985)
Publikacja nie należy do bibliografii Uczelni

66/121
Nr opisu: 0000093732
Multibody system software used for research of car suspension system dynamics.
[Aut.]: Łukasz Konieczny, Rafał Burdzik, Piotr Folęga.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 794-799 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

ADAMS/Car Ride ; zawieszenie samochodu ; układ wieloczłonowy ; urządzenie do prób ; drgania

ADAMS/Car Ride ; car suspension ; multibody system ; test rig ; vibration

67/121
Nr opisu: 0000092462
Narrow reinforced concrete slabs after their flexural destruction.
[Aut.]: Mirosław Wieczorek.
W: Structural and physical aspects of civil engineering. Selected, peer reviewed papers from the 2nd International Conference on Structural and Physical Aspects of Civil Engineering (SPACE-2013), High Tatras, Slovakia, November 27-29, 2013. Ed. K. Kotrasova, E. Kormanikova. Staffa-Zurich : Trans Tech Publications, 2014, s. 271-275, bibliogr. 4 poz. (Advanced Materials Research ; vol. 969 1662-8985). Punktacja MNiSW 7.000

konstrukcja żelbetowa ; budowa płyty ; katastrofa postępująca ; stan awaryjny

reinforced concrete structure ; slab structure ; progressive collapse ; failure stage

68/121
Nr opisu: 0000093768
On departure process in a production model with cyclic working and repair periods.
[Aut.]: Wojciech Kempa, Iwona Paprocka, Krzysztof Kalinowski, Cezary Grabowik.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 846-851 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

proces liczący obsłużone zgłoszenia ; system kolejkowy ze skończonym buforem ; awaria maszyny ; twierdzenie o prawdopodobieństwie całkowitym ; stan nieustalony

departure process ; finite buffer queue ; machine breakdown ; total probability law ; transient state

69/121
Nr opisu: 0000093786
On effect of model parameters on departure process in a production system with failures.
[Aut.]: Wojciech Kempa, Iwona Paprocka, Cezary Grabowik, Krzysztof Kalinowski.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 927-932 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

proces liczący obsłużone zgłoszenia ; skończona pojemność magazynu ; linia produkcyjna ; czas naprawy ; czas pracy

departure process ; finite magazine capacity ; production line ; repair time ; working time

70/121
Nr opisu: 0000093777
On Pareto optimal solution for production and maintenance jobs scheduling problem in a job shop and flow shop with an immune algorithm.
[Aut.]: Iwona Paprocka, Wojciech Kempa, Krzysztof Kalinowski, Cezary Grabowik.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 875-880 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

Flow-Shop ; algorytm immunologiczny ; utrzymanie ruchu ; MTTF/MTTFF ; MTTR ; rozwiązanie optymalne w sensie Pareto ; predykcyjne szeregowanie zadań

Flow-Shop ; immune algorithm ; maintenance ; MTTF/MTTFF ; MTTR ; Pareto optimal solution ; predictive scheduling ; job shop with parallel machines

71/121
Nr opisu: 0000093666
On transient queue-size distribution in a single-machine production system with breakdowns.
[Aut.]: Wojciech Kempa, Iwona Paprocka, Krzysztof Kalinowski, Cezary Grabowik.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 505-510 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

system kolejkowy ze skończonym buforem ; awaria maszyny ; moment Markowa ; rozkład liczby zgłoszeń ; formuła prawdopodobieństwa całkowitego

finite buffer queue ; machine breakdown ; Markov moment ; queue-size distribution ; total probability formula

72/121
Nr opisu: 0000093775
Optimization of the lean production process using the virtual manufacturing cell.
[Aut.]: Agnieszka Sękala, Aleksander Gwiazda, Zbigniew Monica, Wacław Banaś.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 858-863 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

CAD/CAE ; lean production ; podejście wieloagentowe ; symulacja

CAD/CAE ; lean production ; multi-agent approach ; simulation

73/121
Nr opisu: 0000123243
Oxidation resistance of coating obtained by innovative methods for energy boilers.
[Aut.]: Bożena Szczucka-Lasota.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 152-157, bibliogr. 26 poz. (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

proszek kompozytowy ; powłoka ; HVOF ; chłodzenie mikrostrumieniowe

composite powder ; coating ; HVOF ; micro-jet cooling

74/121
Nr opisu: 0000093764
Practical example of the integration of planning and simulation systems using the RapidSim software.
[Aut.]: Damian Krenczyk, M. Zemczak.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 834-839 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

integracja ; system produkcji ; modelowanie ; planowanie produkcji ; symulacja ; weryfikacja

integration ; manufacturing system ; modelling ; production planning ; simulation ; verification

75/121
Nr opisu: 0000093782
Predictive and reactive scheduling for a critical machine of a production system.
[Aut.]: Iwona Paprocka, Wojciech Kempa, Cezary Grabowik, Krzysztof Kalinowski.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 909-914 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

średni czas pomiędzy awariami ; średni czas do uszkodzenia ; rozkład normalny ; harmonogramowanie predyktywne ; harmonogramowanie reaktywne ; MTBF ; MTTF

mean time between failures ; mean time to failure ; normal distribution ; predictive scheduling ; reactive scheduling ; MTBF ; MTTF

76/121
Nr opisu: 0000093670
Protection of hydraulic systems against dynamic loads using multi-valve approach.
[Aut.]: Aleksander Gwiazda, Agnieszka Sękala, Wacław Banaś, Zbigniew Monica.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 547-552 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

CAD/CAE ; projektowanie ; modelowanie systemów dynamicznych ; system hydrauliczny ; zawór hydrauliczny

CAD/CAE ; designing ; dynamic systems modelling ; hydraulic system ; hydraulic valve

77/121
Nr opisu: 0000088731
Real-time monitoring station for production systems.
[Aut.]: Grzegorz Ćwikła.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 334-339 (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

automatyzacja ; kod kreskowy ; akwizycja danych ; monitorowanie produkcji ; sterownik programowalny ; identyfikacja radiowa ; sterowanie nadzorcze ; system wizyjny

automation ; barcode ; data acquisition ; production monitoring ; programmable logic controller ; radio frequency identification ; supervisory control ; vision system

78/121
Nr opisu: 0000097035
Role of halloysite nanoparticles and milling time on the synthesis of AA 6061 aluminium matrix composites.
[Aut.]: Leszek** Dobrzański, Błażej Tomiczek, Grzegorz Matula, Klaudiusz Gołombek.
W: Advances in materials and processing technologies XVI. Selected, peer reviewed papers from the 16th International Conference on Advanced Materials and Processing Technologies (AMPT 2013), September 22-26, 2013, Taipei, Taiwan. Ed. by Zone-Ching Lin, You-Min Huang and Liang-Kuang Chen. Staffa-Zurich : Trans Tech Publications, 2014, s. 84-89, bibliogr. 9 poz. (Advanced Materials Research ; vol. 939 1662-8985). Punktacja MNiSW 7.000

haloizyt ; stop aluminium AA 6061 ; synteza mechaniczna ; kompozyt na osnowie stopów aluminium

halloysite ; AA 6061 aluminium alloy ; mechanical alloying ; aluminium matrix composite

79/121
Nr opisu: 0000093785
Sensitivity analysis of predictive scheduling algorithms.
[Aut.]: Iwona Paprocka, Wojciech Kempa, Cezary Grabowik, Krzysztof Kalinowski.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 921-926 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

problem gniazdowy ; utrzymanie ruchu ; MTTF ; MTTR ; harmonogramowanie predyktywne ; harmonogramowanie reaktywne ; odporność harmonogramu ; odporność jakości harmonogramu

job shop ; maintenance ; MTTF ; MTTR ; predictive scheduling ; reactive scheduling ; solution robustness ; quality robustness

80/121
Nr opisu: 0000088761
Simulation of the Stewart platform carried out using the Siemens NX and NI LabVIEW programs.
[Aut.]: Wacław Banaś, Krzysztof Herbuś, Gabriel Kost, Andrzej* Nierychlok, Piotr Ociepka, Daniel* Reclik.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 537-542 (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

CAD/CAE ; integracja ; analiza ruchu ; symulacja ; platforma Stewarta

CAD/CAE ; integration ; motion analysis ; simulation ; Stewart platform

81/121
Nr opisu: 0000093739
Simulator of the car for driving courses for the people with mobility impairments.
[Aut.]: Piotr Ociepka, Wacław Banaś, Krzysztof Herbuś, Gabriel Kost.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 817-822 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

symulator samochodu ; platforma Stewarta

car simulator ; Stewart platform

82/121
Nr opisu: 0000093662
Steel welding with micro-jet injector.
[Aut.]: Tomasz Węgrzyn, J. Piwnik, I. Horzela, W. Majewski.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 440-445 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

odporność na uderzenie ; struktura metalograficzna ; gaz mikrostrumieniowy ; wytrzymałość ; stopiwo ; spawanie

impact toughness ; metallographic structure ; micro-jet gas ; strength ; weld metal deposit ; welding

83/121
Nr opisu: 0000109702
Structural and physical aspects of civil engineering. Selected, peer reviewed papers from the 2nd International Conference on Structural and Physical Aspects of Civil Engineering (SPACE-2013), High Tatras, Slovakia, November 27-29, 2013. Ed. K. Kotrasova, E. Kormanikova.
Staffa-Zurich : Trans Tech Publications, 2014, 360 s.
(Advanced Materials Research ; vol. 969 1662-8985)
Publikacja nie należy do bibliografii Uczelni

84/121
Nr opisu: 0000093705
Structural health monitoring of rotating machines in manufacturing processes by vibration methods.
[Aut.]: Rafał Burdzik, Łukasz Konieczny, Piotr Folęga.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 642-647 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

łożysko ; diagnostyka ; maszyna wirnikowa ; SHM ; nierównowaga ; drgania

bearing ; diagnostics ; rotating machinery ; SHM ; unbalance ; vibration

85/121
Nr opisu: 0000093608
Structure and properties of the aluminium alloy AlSi12CuNiMg after laser surface treatment.
[Aut.]: Tomasz Tański, Leszek** Dobrzański, Wojciech Pakieła, Krzysztof Labisz, Marek Roszak, Błażej Tomiczek.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 40-45 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

stop aluminium ; ball on plate ; laserowa obróbka powierzchni ; inżynieria powierzchni ; badanie tribologiczne ; zasilanie lasera

aluminium alloy ; ball on plate ; laser surface treatment ; surface engineering ; tribological test ; laser feeding

86/121
Nr opisu: 0000093735
Terms of replacing conventional quality control systems by the Poka-Yoke systems.
[Aut.]: Mariusz Hetmańczyk, Piotr Michalski.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 800-805 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

system zautomatyzowany ; zabezpieczenie przeciw błędom ; Poka-Yoke ; kontrola jakości

automated system ; mistake proofing ; Poka-Yoke ; quality control

87/121
Nr opisu: 0000088755
The aid of a mistake proofing with the use of mechatronic systems according to the Poka-Yoke methodology.
[Aut.]: Mariusz Hetmańczyk, Piotr Michalski.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 399-404 (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

przemysł motoryzacyjny ; obróbka skrawaniem ; metoda Poka-Yoke ; monitorowanie procesów ; kontrola jakości

automotive industry ; machining ; Poka-Yoke method ; process monitoring ; quality inspection

88/121
Nr opisu: 0000093774
The expert system supporting design of the manufacturing information acquisition system (MIAS) for production management.
[Aut.]: Grzegorz Ćwikła, Agnieszka Sękala, Marcin Woźniak.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 852-857 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

system automatycznej identyfikacji ; akwizycja danych ; system ekspertowy ; Exsys Corvid ; system akwizycji informacji produkcyjnych ; PLC ; SCADA

automatic identification system ; data acquisition ; expert system ; Exsys Corvid ; manufacturing information acquisition system ; PLC ; SCADA

89/121
Nr opisu: 0000088759
The graph representation of multivariant and complex processes for production scheduling.
[Aut.]: Krzysztof Kalinowski, Cezary Grabowik, Wojciech Kempa, Iwona Paprocka.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 422-427 (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

graf i/lub ; proces złożony ; system produkcji dyskretnej ; proces wielowariantowy ; harmonogramowanie

AND/OR graph ; complex process ; discrete production system ; multivariant process ; scheduling

90/121
Nr opisu: 0000093592
The implementation of the material loss detection method in the author computer aided overhaul software.
[Aut.]: Witold Janik.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 652-655 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

CAD ; CAM ; CMM ; wykrywanie strat materiałowych ; remont ; regeneracja ; SIEMENS NX

CAD ; CAM ; CMM ; material loss detection ; overhaul ; refurbishing ; SIEMENS NX

91/121
Nr opisu: 0000088739
The inverse problem of kinematics as the tool for determination of motion trajectories exercised by worm drives of a Stewart platform.
[Aut.]: Andrzej Dymarek, Tomasz Dzitkowski.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 357-362 (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

roboty o strukturze równoległej ; platforma manipulatora ; symulator pojazdu

parallel robots ; platform manipulator ; vehicle simulator

92/121
Nr opisu: 0000093730
The markup language as a form of description of the robot's scene.
[Aut.]: Krzysztof Foit.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 770-774 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

język znaczników ; programowanie ; robot ; robotyka ; symulacja

markup language ; programming ; robot ; robotics ; simulation

93/121
Nr opisu: 0000088757
The model of discrete production scheduling system in UML notation - classes diagrams.
[Aut.]: Krzysztof Kalinowski, Cezary Grabowik, Iwona Paprocka, Wojciech Kempa.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 416-421 (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

diagram klas ; technologia zorientowana obiektowo ; harmonogramowanie produkcji ; UML

class diagram ; object oriented technology ; production scheduling ; UML

94/121
Nr opisu: 0000093707
The practical verification of the material loss detection method for cylindrical shape parts.
[Aut.]: Witold Janik.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 656-661 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

CAD ; CAM ; CMM ; wykrywanie strat materiałowych ; remont ; regeneracja ; SIEMENS NX

CAD ; CAM ; CMM ; material loss detection ; overhaul ; refurbishing ; SIEMENS NX

95/121
Nr opisu: 0000093767
The procedure of reaction to unexpected events in scheduling of manufacturing systems with discrete production flow.
[Aut.]: Krzysztof Kalinowski, Cezary Grabowik, Wojciech Kempa, Iwona Paprocka.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 840-845 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

podejmowanie decyzji ; przepływ produkcji dyskretnej ; zakłócenia ; harmonogramowanie produkcji ; zmiana harmonogramu

decision making ; discrete production flow ; disturbances ; production scheduling ; rescheduling

96/121
Nr opisu: 0000088756
The self-excitation phenomenon of quasi shielded inductive proximity switches.
[Aut.]: Piotr Michalski, Mariusz Hetmańczyk.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 405-410 (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

obróbka skrawaniem ; czujnik przemysłowy ; kontrola jakości ; quasi ekranowany indukcyjny czujnik zbliżeniowy

machining ; industrial sensor ; quality inspection ; quasi shielded inductive proximity switch

97/121
Nr opisu: 0000093781
The use of ERP systems to determine the impact of the company on the environment.
[Aut.]: I. Horzela, Bożena Szczucka-Lasota, Tomasz Węgrzyn, W. Majewski.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 903-908 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

czynniki środowiskowe ; system ERP ; monitoring ; zarządzanie organizacją

environmental factors ; ERP system ; monitoring ; organization management

98/121
Nr opisu: 0000093611
Tribological properties of polymer composites reinforced with silver particles.
[Aut.]: Jakub Wieczorek, Agata Blacha-Grzechnik, Jerzy Łabaj, Grzegorz Siwiec.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 65-70 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

PMCp ; cząstka srebra ; tribologia ; proces zużycia

PMCp ; silver particle ; tribology ; wear process

99/121
Nr opisu: 0000123250
Tribological properties of super field weld with micro-jet process.
[Aut.]: W. Tarasiuk, Bożena Szczucka-Lasota, J. Piwnik, W. Majewski.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 452-457, bibliogr. 37 poz. (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

proces spawania mikrostrumieniowego ; spawanie ; zużycie ścierne ; właściwości tribologiczne

micro-jet weld process ; welding ; abrasive wear ; tribological properties

100/121
Nr opisu: 0000088741
UML models of design and knowledge representation for technical production preparation needs.
[Aut.]: Cezary Grabowik, Krzysztof Kalinowski, Iwona Paprocka, Wojciech Kempa.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 369-374 (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

CAP ; CAPP ; projekt ; reprezentacja wiedzy ; planowanie procesu ; UML

CAP ; CAPP ; design ; knowledge representation ; process planning ; UML

101/121
Nr opisu: 0000093737
Validation process of the automatic Poka-Yoke systems in case of symmetrical objects.
[Aut.]: Piotr Michalski, Mariusz Hetmańczyk.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 806-810 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

system zautomatyzowany ; zabezpieczenie przeciw błędom ; Poka-Yoke ; kontrola jakości ; optymalizacja procesów

automated system ; mistake proofing ; Poka-Yoke ; quality control ; process optimization

102/121
Nr opisu: 0000088753
Virtual analysis of the mining support under loads of the roof.
[Aut.]: Aleksander Gwiazda.
W: Modern technologies in industrial engineering. Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), Sinaia, Romania, June 27-29, 2013. Ed. by C. Carausu [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 393-398 (Advanced Materials Research ; vol. 837 1662-8985). Punktacja MNiSW 7.000

hydrauliczna podpora stropu ; stabilność ; analiza wirtualna

hydraulic roof support ; stability ; virtual analysis

103/121
Nr opisu: 0000093728
Visual interface for hybrid programming of the industrial robot.
[Aut.]: Krzysztof Foit.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 743-748 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

język programowania ; robot ; robotyka ; symulacja ; interfejs graficzny

programming language ; robot ; robotics ; simulation ; visual interface

104/121
Nr opisu: 0000093653
Welding of Inconel 625 using a direct diode laser.
[Aut.]: Damian Janicki.
W: Modern technologies in industrial engineering II. Selected, peer reviewed papers from the Modern Technologies in Industrial Engineering. ModTech 2014, Gliwice, Poland, July 13-16. Ed. by Constantin Carausu, Andrzej Wróbel [et al.]. Staffa-Zurich : Trans Tech Publications, 2014, s. 331-336 (Advanced Materials Research ; vol. 1036 1662-8985). Punktacja MNiSW 7.000

złącze doczołowe ; laser diodowy dużej mocy ; Inconel 625 ; spawanie laserowe ; nadstop na bazie niklu ; tryb przewodzenia

butt joint ; high power diode laser ; Inconel 625 ; laser welding ; nickel-based superalloy ; conduction mode

105/121
Nr opisu: 0000110688
Advanced materials science and applied mechanics. Selected, peer reviewed papers from the 2013 International Conference on Solid State and Materials (ICSSM 2013), Los Angeles, CA, USA, January 30-31, 2013. Ed. Q. Zeng.
Staffa-Zurich : Trans Tech Publications, 2013, 340 s.
(Advanced Materials Research ; vol. 702 1662-8985)
Publikacja nie należy do bibliografii Uczelni

106/121
Nr opisu: 0000084435
An investigation of the behaviour of magnetorheological fluids in the rotary shock-absorber.
[Aut.]: Sławomir Kciuk, Monika Kciuk, Roman Turczyn, P. Martynowicz.
W: Manufacturing engineering and technology for manufacturing growth. Selected, peer reviewed papers from the 2012 International Conference on Manufacturing Engineering and Technology for Manufacturing Growth (METMG 2012), San Diego, USA, November 1-2, 2012. [Dokument elektroniczny]. Ed. Dayun Xu. Staffa-Zurich : Trans Tech Publications, 2013, dysk optyczny (CD-ROM) s. 512-517, bibliogr. 10 poz. (Advanced Materials Research ; vol. 628 1662-8985). Punktacja MNiSW 7.000

amortyzator rotacyjny ; ciecz magnetoreologiczna ; materiały inteligentne ; własności magnetyczne

rotary shock absorber ; MR fluid ; smart materials ; magnetic properties

107/121
Nr opisu: 0000111112
Manufacturing engineering and technology for manufacturing growth. Selected, peer reviewed papers from the 2012 International Conference on Manufacturing Engineering and Technology for Manufacturing Growth (METMG 2012), San Diego, USA, November 1-2, 2012. [Dokument elektroniczny]. Ed. Dayun Xu.
Staffa-Zurich : Trans Tech Publications, 2013, dysk optyczny (CD-ROM) 549 s.
(Advanced Materials Research ; vol. 628)
Publikacja nie należy do bibliografii Uczelni

108/121
Nr opisu: 0000080951
Model experiments with new lance for pneumatic powder injection.
[Aut.]: Jan Jezierski, Krzysztof Janerka.
W: Advanced materials science and applied mechanics. Selected, peer reviewed papers from the 2013 International Conference on Solid State and Materials (ICSSM 2013), Los Angeles, CA, USA, January 30-31, 2013. Ed. Q. Zeng. Staffa-Zurich : Trans Tech Publications, 2013, s. 62-67, bibliogr. 18 poz. (Advanced Materials Research ; vol. 702 1662-8985). Punktacja MNiSW 7.000

lanca wtryskowa ; doświadczenia modelowe ; transport pneumatyczny ; wtryskiwanie proszku

injection lance ; model experiments ; pneumatic conveying ; powder injection

109/121
Nr opisu: 0000101636
Rotary shock-absorber with magnetorheological valves.
[Aut.]: P. Martynowicz, Sławomir Kciuk, Arkadiusz Mężyk.
W: Manufacturing engineering and technology for manufacturing growth. Selected, peer reviewed papers from the 2012 International Conference on Manufacturing Engineering and Technology for Manufacturing Growth (METMG 2012), San Diego, USA, November 1-2, 2012. [Dokument elektroniczny]. Ed. Dayun Xu. Staffa-Zurich : Trans Tech Publications, 2013, dysk optyczny (CD-ROM) s. 505-511, bibliogr. 10 poz. (Advanced Materials Research ; vol. 628 1662-8985). Punktacja MNiSW 7.000

amortyzator ; ciecz magnetoreologiczna ; wibroizolacja semiaktywna

shock absorber ; magnetorheological fluid ; semiactive vibroisolation

110/121
Nr opisu: 0000081083
Microstructure of the synthetic cast iron carburized with different types of carburizers.
[Aut.]: Krzysztof Janerka, Jan Jezierski, Dariusz Bartocha, Jan Szajnar.
W: Material sciences and manufacturing technology. Ed. L. Jiang. Staffa-Zurich : Trans Tech Publications, 2012, s. 122-126 (Advanced Materials Research ; vol. 629 1662-8985)

111/121
Nr opisu: 0000083466
Effect of laser surface melting on structure and properties of a high speed tool steel.
[Aut.]: Mirosław Bonek, Grzegorz Matula, Leszek** Dobrzański.
W: Materials processing technology. Ed by. Y Li [et al.]. Staffa-Zurich : Trans Tech Publications, 2011, s. 1365-1368, bibliogr. 8 poz. (Advanced Materials Research ; vol. 291/294 1662-8985)

formowanie bezciśnieniowe ; materiały narzędziowe ; laserowa obróbka powierzchni

pressureless forming ; tool materials ; laser surface treatment

112/121
Nr opisu: 0000066604
Numerical modelling of hyperthermia and hypothermia processes.
[Aut.]: Ewa Majchrzak, B. Mochnacki, Mirosław* Dziewoński, Marek Jasiński.
W: Computational materials science. Selected peer reviewed papers from the 2011 International Conference on Computational Materials Science (CMS 2011), Guangzhou, China, 17-18 April 2011. Ed. Feng Xiong. Staffa-Zurich : Trans Tech Publications, 2011, s. 257-262 (Advanced Materials Research ; vol. 268/270 1662-8985)

113/121
Nr opisu: 0000069749
Optimization of high speed machine tool frames.
[Aut.]: Jan Kosmol, Piotr Wilk.
W: Modelling of machining operations. Selected, peer review papers from the 13th CIRP Conference on Modelling of Machining Operations, Sintra, Portugal, May 12-13, 2011. [Proceedings]. Ed. by J. C. Outeiro. Staffa-Zurich : Trans Tech Publications, 2011, s. 723-730 (Advanced Materials Research ; vol. 223 1662-8985)

finite element method

114/121
Nr opisu: 0000072698
Optimization of high speed machine tool frames.
[Aut.]: Jan Kosmol, Piotr Wilk.
W: Modelling of machining operations. Selected, peer review papers from the 13th CIRP Conference on Modelling of Machining Operations, Sintra, Portugal, May 12-13, 2011. Proceedings. Ed. by J. C. Outeiro. Stafa-Zurich : Trans Tech Publications, 2011, 723-730 (Advanced Materials Research ; vol. 223 1662-8985)

model elementów skończonych ; MES ; rama ; HSC ; optymalizacja

finite element model ; FEM ; frame ; HSC ; optimization

115/121
Nr opisu: 0000083582
Surface layer properties of sintered ferritic stainless steel remelted and alloyed with FeNi and Ni by HPDL laser.
[Aut.]: Zbigniew Brytan, Mirosław Bonek, Leszek** Dobrzański, Wojciech Pakieła.
W: Materials processing technology. Ed by. Y Li [et al.]. Staffa-Zurich : Trans Tech Publications, 2011, s. 1425-1428 (Advanced Materials Research ; vol. 291/294 1662-8985)

HPDL ; stopowanie ; przetapianie ; nierdzewna stal ferrytyczna

HPDL ; alloying ; remelting ; ferritic stainless steel

116/121
Nr opisu: 0000063655
Magnetostrictive properties of epoxy-bonded Tb_0,3Dy_0,7Fe_1,9 composites.
[Aut.]: Leszek** Dobrzański, Anna Wydrzyńska, O. Iesenchuk, R. Zuberek.
W: 6th International Conference on Processing & Manufacturing of Advanced Materials. THERMEC 2009, Berlin, Germany, August 25-29, 2009. Ed. by T. Chandra [et al.]. Staffa-Zurich : Trans Tech Publications, 2010, s. 633-638, bibliogr. 10 poz. (Advanced Materials Research ; vol. 89/91, suppl. 1 1022-6680)

117/121
Nr opisu: 0000063648
Microstructure and thermal diffusivity of Gd₂Zr₂O₇ powders.
[Aut.]: Grzegorz Moskal, A. Rozmysłowska.
W: 6th International Conference on Processing & Manufacturing of Advanced Materials. THERMEC 2009, Berlin, Germany, August 25-29, 2009. Ed. by T. Chandra [et al.]. Staffa-Zurich : Trans Tech Publications, 2010, s. 739-744, bibliogr. 14 poz. (Advanced Materials Research ; vol. 89/91, suppl. 1 1022-6680)

118/121
Nr opisu: 0000040949
Influence of Cooling Rate on the Size of the Precipitates and Thermal Characteristic of Al-Si Cast Alloys.
[Aut.]: Rafał* Maniara, Leszek** Dobrzański, J. Sokołowski, Wojciech* Kasprzak, W. Kierkus.
W: 5th International Conference on Processing & Manufacturing of Advanced Materials. THERMEC 2006 , Vancouver, Canada, July 4-8, 2006. [B.m.] : Trans Tech Publications, 2007, s. 59-64 (Advanced Materials Research ; vol. 15/17 1022-6680)

119/121
Nr opisu: 0000040950
Influence of heat treatment on structure and properties of the cast magnesium alloys.
[Aut.]: Tomasz Tański, Leszek** Dobrzański, L. Cizek.
W: 5th International Conference on Processing & Manufacturing of Advanced Materials. THERMEC 2006 , Vancouver, Canada, July 4-8, 2006. [B.m.] : Trans Tech Publications, 2007, s. 491-496 (Advanced Materials Research ; vol. 15/17 1022-6680)

120/121
Nr opisu: 0000040951
Laser alloying with WC ceramic powder in hot work tool steel using a high power diode laser (HPDL).
[Aut.]: Marek* Piec, Leszek** Dobrzański, Krzysztof Labisz, Ewa Jonda, Andrzej Klimpel.
W: 5th International Conference on Processing & Manufacturing of Advanced Materials. THERMEC 2006 , Vancouver, Canada, July 4-8, 2006. [B.m.] : Trans Tech Publications, 2007, s. 193-198 (Advanced Materials Research ; vol. 15/17 1022-6680)

121/121
Nr opisu: 0000040953
Properties of vacuum sintered duplex stainless steels.
[Aut.]: Leszek** Dobrzański, Zbigniew Brytan, M. Actis Grande, M. Rosso.
W: 5th International Conference on Processing & Manufacturing of Advanced Materials. THERMEC 2006 , Vancouver, Canada, July 4-8, 2006. [B.m.] : Trans Tech Publications, 2007, s. 828-833 (Advanced Materials Research ; vol. 15/17 1022-6680)

stosując format: