Wynik wyszukiwania
Zapytanie: IOP CONFERENCE SERIES
Liczba odnalezionych rekordów: 525



Przejście do opcji zmiany formatu | Wyświetlenie wyników w wersji do druku | Pobranie pliku do edytora | Przesłanie wyników do modułu analizy | excel | Nowe wyszukiwanie
1/525
Nr opisu: 0000128445   
3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online].
Bristol : Institute of Physics, 2019, (plik pdf) 6000 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)
Publikacja nie należy do bibliografii Uczelni

2/525
Nr opisu: 0000129743   
4th International Conference on Mechanical, Manufacturing, Modeling and Mechatronics IC4M 2019, in Conjunction with 4th International Conference on Design Engineering and Science, ICDES 2019, Nice, France, 22-24 February 2019.
Bristol : Institute of Physics, 2019, 500 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 520 1757-8981)
Publikacja nie należy do bibliografii Uczelni

3/525
Nr opisu: 0000131371   
4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online].
Bristol : Institute of Physics, 2019, (plik pdf) 4000 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)
Publikacja nie należy do bibliografii Uczelni

4/525
Nr opisu: 0000128076   
5th International Conference Recent Trends in Structural Materials, 14-16 November 2018, Pilsen, Czech Republic.
Bristol : Institute of Physics Publishing, 2018, 590 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 461 1757-8981)
Publikacja nie należy do bibliografii Uczelni

5/525
Nr opisu: 0000129509   
A note on the strength and deformation properties of a some sandstone under three-point bending in the context of tension and compression behaviour.
[Aut.]: Krzysztof Tomiczek.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012055 s. 1-11, bibliogr. 13 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

mechanika skał ; próba jednoosiowego ściskania ; próba jednoosiowego rozciągania ; próba brazylijska ; próba trójpunktowego zginania ; moduł Younga ; wytrzymałość skały ; własności wytrzymałościowe skał ; wytrzymałość na zginanie ; geomechanika

rock mechanics ; uniaxial compression test ; uniaxial tension test ; Brazilian test ; three-point bending test ; Young's modulus ; strength of rock ; strength properties of rocks ; flexural strength ; geomechanics

6/525
Nr opisu: 0000131421   
A place of sustainable development in contemporary urban concepts.
[Aut.]: Katarzyna Mazur-Belzyt.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 042043 s. 1-9, bibliogr. 28 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

7/525
Nr opisu: 0000129589   
A study of the correlation between seniority and the number of work accidents in mining enterprises between 2003-2017.
[Aut.]: Małgorzata Wyganowska.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012058 s. 1-8, bibliogr. 14 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

8/525
Nr opisu: 0000128573   
Accelerators for start-ups as the strategic initiative for the development of Metropolis.
[Aut.]: Anna Kwiotkowska, Magdalena Gębczyńska.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 092014 s. 1-11, bibliogr. 30 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

9/525
Nr opisu: 0000129579   
An attempt to apply a slag binder with zeolite in mining construction. Durability and hardness.
[Aut.]: Barbara Słomka-Słupik, J. Podwórny, M. Polus.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012046 s. 1-11, bibliogr. 29 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

10/525
Nr opisu: 0000129540   
Analysis of relations and forecast of prices of energy resources with the use of spectral analysis and time series methods.
[Aut.]: Joanna Herczakowska.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012012 s. 1-13, bibliogr. 15 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

11/525
Nr opisu: 0000129588   
Analysis of stress level during longwall mining of a coal seam with the use of seismic effect method.
[Aut.]: Ł. Wojtecki, Iwona Gołda.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. s. 1-11, bibliogr. 18 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

12/525
Nr opisu: 0000129543   
Analysis of stress state in mine shaft lining, taking into account superficial defects.
[Aut.]: Marek Jendryś.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012016 s. 1-11, bibliogr. 10 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

13/525
Nr opisu: 0000128555   
Analysis of the shear angle in corrugated web girders.
[Aut.]: Witold Basiński.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 052005 s. 1-11, bibliogr. 14 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

14/525
Nr opisu: 0000131407   
Analysis of the spatial structure of the housing estates transformations' possibilities on a selected example.
[Aut.]: Szymon Opania.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 022099 s. 1-12, bibliogr. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

15/525
Nr opisu: 0000129574   
Analysis of the Strategy for the Energy Policy of Poland until 2030 implementation effects in the aspect of environmental protection taking into account the energy security of Poland.
[Aut.]: Aurelia Rybak, Aleksandra Rybak.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012044 s. 1-13, bibliogr. 16 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

16/525
Nr opisu: 0000129511   
Apatite in coal from bed 361 in the south-western part of the Upper Silesian Coal Basin.
[Aut.]: Zdzisław Adamczyk, Joanna Komorek, Małgorzata Lewandowska, A. Klupa.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012001 s. 1-10, bibliogr. 18 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

17/525
Nr opisu: 0000129234
Application of wavelet analysis to differences in modal rotations for damage identification.
[Aut.]: Andriy Katunin, J. V. Araujo dos Santos, H. Lopes.
W: First International Conference on Materials Science and Manufacturing Technology. Proceedings of the ICMSMT 2019, Coimbatore, Tamil Nadu, India, 12-13 April 2019. Vol. 3. Eds.: M. Ramya Muthusamy, Astuty bt. Amrin. Bristol : Institute of Physics, 2019, s. 697-702, bibliogr. 10 poz. (IOP Conference Series ; in press Materials Science and Engineering ; 1757-8981)
Article in press

shearografia ; analiza falkowa ; identyfikacja uszkodzeń ; badania nieniszczące

shearography ; wavelet analysis ; damage identification ; non-destructive testing

18/525
Nr opisu: 0000129545   
Assessing occupational health and safety management quality by means of multi-criteria assessment. A case study.
[Aut.]: Zygmunt Korban.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012019 s. 1-9, bibliogr. 15 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

19/525
Nr opisu: 0000129513   
Assessment of the hazard level posed to a post-mining area by discontinuous surface deformations.
[Aut.]: Mirosław** Chudek, Piotr Strzałkowski.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012004 s. 1-12, bibliogr. 14 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

20/525
Nr opisu: 0000129517   
Assessment of the risk of loss of stability of the steel arch support of the underground excavations.
[Aut.]: Stanisław Duży, M. Cholewa.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012008 s. 1-12, bibliogr. 7 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

21/525
Nr opisu: 0000131427   
Attempt at numerical representation of gas explosion in a large panel building.
[Aut.]: M. Kadela, Andrzej Cińcio, J. Fedorowicz, R. Geryło.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 052023 s. 1-14, bibliogr. 49 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

22/525
Nr opisu: 0000128468   
Attempt to describe the mechanism of work of masonry joints.
[Aut.]: Iwona Galman, Radosław Jasiński.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 052054 s. 1-12, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

konstrukcja murowa ; połączenia ścian ; sztywność ściany ; ściana usztywniająca

masonry structure ; wall joints ; stiffening wall

23/525
Nr opisu: 0000129544   
Calculations regarding the application of isolating and retaining seals with culverts.
[Aut.]: Henryk Kleta.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012018 s. 1-8, bibliogr. 5 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

24/525
Nr opisu: 0000129565   
Calibration of raster image using GIS class software - accuracy analysis.
[Aut.]: Aleksandra Mierzejowska, Maciej Pomykoł.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012033 s. 1-9, bibliogr. 20 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

25/525
Nr opisu: 0000131533   
CFD analysis of a hybrid, Darrieus-Savonius, horizontal wind turbine, using static and moving mesh.
[Aut.]: Łukasz Grabowski, Michał Sobek, Andrzej Baier.
W: Modern Technologies in Industrial Engineering VII. ModTech 2019, 19-22 June 2019, Iasi, Romania. Bristol : Institute of Physics Publishing, 2019, art. no. 012049 s. 1-7, bibliogr. 10 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 591 1757-8981)

26/525
Nr opisu: 0000129563   
Characteristics of mathematical models of coal slurries processing for the purpose of examining the opportunities for improvement of quality parameters.
[Aut.]: Anna Manowska.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012029 s. 1-10, bibliogr. 11 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

27/525
Nr opisu: 0000129519   
Classification of the technical condition of steel arch supports in dog headings with a long-term service life.
[Aut.]: Grzegorz Dyduch.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012009 s. 1-9, bibliogr. 14 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

28/525
Nr opisu: 0000128565   
Comparison of diffusion and migration coefficients determined from tests on concrete in prestressed floor slabs HC-500.
[Aut.]: Zofia Szweda.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 052034 s. 1-10, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

29/525
Nr opisu: 0000128546   
Comparison of efficiency of accelerating admixtures for concrete using multiple-criteria decision analysis (MCDA).
[Aut.]: Jan Pizoń, Beata Łaźniewska-Piekarczyk.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 032043 s. 1-10, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

30/525
Nr opisu: 0000131422   
Comparison of protective properties of concretes with low alkali cement.
[Aut.]: Zofia Szweda.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 042059 s. 1-10, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

31/525
Nr opisu: 0000130825   
Concept of technology assessment in coal mining.
[Aut.]: Dorota Palka, Kinga Stecuła.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012038 s. 1-8, bibliogr. 22 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

32/525
Nr opisu: 0000131406   
Consideration of soil temperature in the modeling of early-age mass concrete slab.
[Aut.]: Aneta Żmij, Barbara Klemczak, M. Azenha, D. Schlicke.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 022095 s. 1-12, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

33/525
Nr opisu: 0000128574   
Contemporary parks in post-industrial cities of Upper Silesian-Zaglebie Metropolis.
[Aut.]: Alina Pancewicz.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 092037 s. 1-11, bibliiogr. 19 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

34/525
Nr opisu: 0000128543   
Cost effective alternative solution for the renovation of concrete pavements.
[Aut.]: Jacek Kawalec, L. Hornicek, Z. Rakowski.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 022041 s. 1-10, bibliogr. 22 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

35/525
Nr opisu: 0000128559   
Cracking and failure mechanism of masonry walls loaded vertically and supported by deflecting structural member.
[Aut.]: Adam Piekarczyk.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 052018 s. 1-11, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

36/525
Nr opisu: 0000128477   
Damage to historical balconies in view of building physics.
[Aut.]: Jan Ślusarek, Agnieszka Szymanowska-Gwiżdż, Paweł Krause.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 082052 s. 1-11, bibliogr. 26 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

37/525
Nr opisu: 0000128550   
Damaging mineral transformation of greywacke aggregate in SMA 11 and AC 11 wearing courses used in A1 motorway pavement in Silesia Poland.
[Aut.]: Bartłomiej Grzesik, Zdzisław Adamczyk, Jacek Nowak, A. Klupa.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 032051 s. 1-11, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

38/525
Nr opisu: 0000128621   
Decoupling economic growth from emissions in Poland on the background of EU countries.
[Aut.]: Anna Bluszcz.
W: World Multidisciplinary Earth Sciences Symposium (WMESS 2018), 3-7 September 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012119 s. 1-9, bibliogr. 14 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 221 1755-1315)

39/525
Nr opisu: 0000129581   
DEM (PFC3D) numerical simulation of the influence of grain orientation on the strength of the Kimachi sandstone.
[Aut.]: Grzegorz Smolnik.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012047 s. 1-10, bibliogr. 7 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

40/525
Nr opisu: 0000129502   
Depth of the mining exploitation and its progress in the time, and a random dispersion of observed terrain subsidence and their derivatives.
[Aut.]: Justyna Orwat.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012037 s. 1-11, bibliogr. 20 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

głębokość eksploatacji górniczej ; krzywizna terenu górniczego ; obserwowane obniżenia ; nachylenie terenu górniczego ; rozproszenie losowe

mining exploitation depth ; mining terrain curvature ; observed subsidence ; inclination of mining area ; random scattering

41/525
Nr opisu: 0000129372   
Detection of anomalous zones in a rock-mass, caused by past shallow extraction of zinc, lead and silver ore.
[Aut.]: Rafał Jendruś, Tadeusz Mzyk.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art no. 012015 s. 1-12, bibliogr. 17 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

42/525
Nr opisu: 0000129578   
Determination of parameters for the prognosis of rock mass deformation with the use of the cellular automaton method.
[Aut.]: Paweł Sikora, Ryszard Mielimąka.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012045 s. 1-13, bibliogr. 19 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

43/525
Nr opisu: 0000129512   
Determining the position of pick holders on the side surface of the working unit of the cutting machine in the robotic technology of their assembly.
[Aut.]: Piotr Cheluszka, Amadeus Jagieła-Zając.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012003 s. 1-13, bibliogr. 16 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

44/525
Nr opisu: 0000128490   
Development and optimization of high early strength concrete mix design.
[Aut.]: Jacek Gołaszewski, Grzegorz Cygan, Małgorzata Gołaszewska.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 112026 s. 1-10, bibliogr. 10 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

45/525
Nr opisu: 0000131429   
Effectiveness of different RAP rejuvenators obtained from tests on Marshall samples.
[Aut.]: Wojciech Sorociak, Bartłomiej Grzesik.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 052058 s. 1-7, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

46/525
Nr opisu: 0000128465   
Effects of opening shapes on behaviour of shear walls made of AAC masonry units.
[Aut.]: Radosław Jasiński.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 022011 s. 1-11, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

autoklawizowany beton komórkowy ; ściana usztywniająca ; ściana z otworami ; obraz zarysowania

autoclaved aerated concrete ; shear wall ; wall with openings ; cracking pattern

47/525
Nr opisu: 0000128457   
Effects of technology of placing different types of reinforcement in bed joints on compressive and shear strength of AAC masonry walls.
[Aut.]: Radosław Jasiński, Łukasz Drobiec.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 022010 s. 1-11, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

konstrukcja murowa ; zbrojenie w spoinach wspornych ; ściskanie ; ścinanie ; ściskanie ukośne

masonry structure ; bed joint reinforcement ; compression ; shear ; diagonal compression

48/525
Nr opisu: 0000131414   
Efficiency assessment of accelerating admixtures and cement kiln dust with cooperation with different phase composition slag blended cements.
[Aut.]: Jan Pizoń, Beata Łaźniewska-Piekarczyk.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 032088 s. 1-11, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

49/525
Nr opisu: 0000129541   
Elliptical shape and size approximation of a particle contour.
[Aut.]: Adam Heyduk.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012013 s. 1-9, bibliogr. 8 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

50/525
Nr opisu: 0000129572   
Energy and environmental implications of electromobility implementation in Poland.
[Aut.]: Franciszek Plewa, Grzegorz Strozik.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012042 s. 1-10, bibliogr. 10 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

51/525
Nr opisu: 0000129571   
Enrichment effects at different control algorithms in jig in the presence of feed flow rate changes.
[Aut.]: Wojciech Pielucha.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012041 s. 1-9, bibliogr. 15 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

52/525
Nr opisu: 0000128569   
Estimation of heat retention index basing on temperature measurements.
[Aut.]: Iwona Pokorska-Silva, Artur Nowoświat, L. Fedorowicz.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 062014 s. 1-8, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

53/525
Nr opisu: 0000129555   
Experimental and theoretical assessment of functional and operational qualities of mechanical protection mechanisms used in safety couplings of drive systems of mining machines.
[Aut.]: Mariusz Kuczaj, Wojciech Sitek.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012024 s. 1-14, bibliogr. 4 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

54/525
Nr opisu: 0000130648
First International Conference on Materials Science and Manufacturing Technology. Proceedings of the ICMSMT 2019, Coimbatore, Tamil Nadu, India, 12-13 April 2019. Vol. 3. Eds.: M. Ramya Muthusamy, Astuty bt. Amrin.
Bristol : Institute of Physics, 2019, 523 s.
(IOP Conference Series ; in press Materials Science and Engineering ; 1757-8981)
Publikacja nie należy do bibliografii Uczelni

55/525
Nr opisu: 0000129582   
Forecast and assessment of the effects of the impact of mining tremors, induced by exploitation, on building objects with the use of GIS system.
[Aut.]: Violetta Sokoła-Szewioła, Monika Żogała.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012048 s. 1-8, bibliogr. 12 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

56/525
Nr opisu: 0000129510   
Forms of occurrence of selected alloying elements in slag from an electric arc furnace.
[Aut.]: Iwona Jonczy.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012017 s. 1-10, bibliogr. 20 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

57/525
Nr opisu: 0000131425   
Frost resistance of concrete from innovative air-entraining cements.
[Aut.]: Beata Łaźniewska-Piekarczyk, Patrycja Miera.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 042082 s. 1-11, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

58/525
Nr opisu: 0000128566   
FRP strengthening of timber structures under the elevated temperature.
[Aut.]: Rafał Krzywoń.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 052049 s. 1-9, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

59/525
Nr opisu: 0000131411   
Functional and spatial aspects of the riverside areas development in cities of the Silesian Voivodeship.
[Aut.]: Alina Pancewicz.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 032061 s. 1-10, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

60/525
Nr opisu: 0000129561   
Geochemical modelling of processes in near-wellbore zone under CO2 injection conditions.
[Aut.]: A. Lorek, Małgorzata Labus.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012027 s. 1-10, bibliogr. 10 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

61/525
Nr opisu: 0000131402   
Housing Estate Game V.2.0 - ideas for design of housing estates' density models - the case study of urbanism workshops game created for science promotion.
[Aut.]: Tomasz Bradecki.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 022056 s. 1-9, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

62/525
Nr opisu: 0000129550   
Identification of theoretical parameters used to forecast impact of underground mining on one coal seam performed on the basis of a geodetic survey.
[Aut.]: Marek Kruczkowski.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012022 s. 1-8, bibliogr. 13 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

63/525
Nr opisu: 0000128544   
Impact of an edge sound reducer built into the upper edge of the acoustic screen on the distribution of acoustic field on the receiver' side.
[Aut.]: Rafał Żuchowski, Artur Nowoświat, Jerzy Bochen.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 032014 s. 1-8, bibliogr. 10 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

64/525
Nr opisu: 0000129542   
Impact of confining pressure and orientation of discontinuities on the behaviour of jointed rock mass.
[Aut.]: Patrycja Jarczyk.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. s. 1-8, bibliogr. 18 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

65/525
Nr opisu: 0000129567   
Impact of occupational safety culture on the occurrence of accidents in a selected coal mine.
[Aut.]: Anna Morcinek-Słota.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012035 s. 1-7, bibliogr. 6 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

66/525
Nr opisu: 0000129566   
Impact of the lining of mining galleries' technical condition on the safety of mining crews.
[Aut.]: Piotr Mocek.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012034 s. 1-14, bibliogr. 6 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

67/525
Nr opisu: 0000131424   
Influence of amount of calcareous fly ash on heat of hydration of Portland cement.
[Aut.]: Patrycja Miera, Jacek Gołaszewski, Zbigniew Giergiczny.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 042081 s. 1-9, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

68/525
Nr opisu: 0000128487   
Influence of multicomponent and pozzolanic cements containing calcareous fly ash and other mineral admixtures on properties of fresh cement mixtures.
[Aut.]: Jacek Gołaszewski, Aleksandra Kostrzanowska-Siedlarz, Tomasz Ponikiewski, Patrycja Miera.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 112024 s. 1-11, bibliogr. 24 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

69/525
Nr opisu: 0000128861   
Influence of rubber and mineral admixtures on selected swelling properties of red clay.
[Aut.]: Magdalena Kowalska, Maja Ptaszek.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 042012 s. 1-10, bibliogr. 18 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

70/525
Nr opisu: 0000129735   
Influence of selected parameters of the motor controller on the current characteristics of the DC brush motor used in the Silesian Greenpower's Vehicle.
[Aut.]: Paweł Żur, Andrzej Baier, Alicja Kołodziej.
W: 4th International Conference on Mechanical, Manufacturing, Modeling and Mechatronics IC4M 2019, in Conjunction with 4th International Conference on Design Engineering and Science, ICDES 2019, Nice, France, 22-24 February 2019. Bristol : Institute of Physics, 2019, art. no. 012010 s. 1-7, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 520 1757-8981)

71/525
Nr opisu: 0000128489   
Influence on type of cement on the SCC formwork pressure during and after casting.
[Aut.]: Grzegorz Cygan, Jacek Gołaszewski, M. Drewniok.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 112025 s. 1-10, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

72/525
Nr opisu: 0000128541   
Initial research on mechanical response of unbound granular material under static load with various moisture content.
[Aut.]: Przemysław Rokitowski, Marcin Grygierek.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 032040 s. 1-12, bibliogr. 9 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

73/525
Nr opisu: 0000129988   
Innovative Mining Technologies. IMTech 2019 Scientific and Technical Conference, 25-27 March 2019, Szczyrk, Poland [online].
Bristol : Institute of Physics, 2019, (plik pdf) 172 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 545 1757-8981)
Publikacja nie należy do bibliografii Uczelni

74/525
Nr opisu: 0000128587   
Internal client and efficiency in the mining process.
[Aut.]: J. Korski, Katarzyna Tobór-Osadnik, Małgorzata Wyganowska.
W: World Multidisciplinary Earth Sciences Symposium (WMESS 2018), 3-7 September 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012102 s. 1-9, bibliogr. 9 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 221 1755-1315)

75/525
Nr opisu: 0000128362   
International Conference on Applied Sciences, 9-11 May 2018, Banja Luke, Bosnia and Herzegovina [online].
Bristol : Institute of Physics, 2019, (plik pdf) 600 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 477 1757-8981)
Publikacja nie należy do bibliografii Uczelni

76/525
Nr opisu: 0000128222   
International Conference on the Sustainable Energy and Environmental Development, 14-17 November 2017, Krakow, Poland [online].
Bristol : Institute of Physics, 2019, (plik pdf) 1250 s.
(IOP Conference Series ; Earth and Environmental Science ; vol. 214 1755-1315)
Publikacja nie należy do bibliografii UczelniDostępny w Internecie: https://iopscience.iop.org/issue/1755-1315/214/1 [dostęp 7 lutego 2019]

77/525
Nr opisu: 0000128214   
Investigation of ash deposition in PF boiler during combustion of torrefied biomass.
[Aut.]: Katarzyna* Jagodzińska, Waldemar Gądek, Marek Pronobis, Sylwester Kalisz.
W: International Conference on the Sustainable Energy and Environmental Development, 14-17 November 2017, Krakow, Poland [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012080 s. 1-11, bibliogr. 30 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 214 1755-1315)
Dostępny w Internecie: https://iopscience.iop.org/article/10.1088/1755-1315/214/1/012080/meta [dostęp 7 lutego 2019]

78/525
Nr opisu: 0000128363   
Linear regression equation of mining terrain curvatures caused by hard coal excavation from a few seams and their approximated values by the use of smoothed spline.
[Aut.]: Justyna Orwat.
W: International Conference on Applied Sciences, 9-11 May 2018, Banja Luke, Bosnia and Herzegovina [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012042 s. 1-10, bibliogr. 18 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 477 1757-8981)

regresja liniowa ; krzywizna terenu górniczego ; wygładzone funkcje sklejane ; eksploatacja kilkupokładowa ; aproksymacja

linear regression ; mining terrain curvature ; smoothed spline functions ; exploitation in several seams ; approximation

79/525
Nr opisu: 0000129586   
Local government policy in the Silesian province with regards to a low-carbon economy.
[Aut.]: Katarzyna Tobór-Osadnik.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012054 s. 1-9, bibliogr. 15 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

80/525
Nr opisu: 0000131068   
MAG welding of 960QL quenched and tempered steel.
[Aut.]: Jacek Górka, Aleksandra Kotarska.
W: Modern Technologies in Industrial Engineering VII. ModTech 2019, 19-22 June 2019, Iasi, Romania. Bristol : Institute of Physics Publishing, 2019, art. no. 012017 s. 1-8, bibliogr. 17 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 591 1757-8981)

81/525
Nr opisu: 0000129987   
Magnetic-and-powder method in diagnostics of welded joints in powered roof supports.
[Aut.]: S. Szweda, Jarosław Mikuła, Stanisław** Mikuła.
W: Innovative Mining Technologies. IMTech 2019 Scientific and Technical Conference, 25-27 March 2019, Szczyrk, Poland [online]. Bristol : Institute of Physics, 2019, (plik pdf ) art. no. 012015 s. 1-7, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 545 1757-8981)

82/525
Nr opisu: 0000131412   
Metallurgical sludge as sand replacement and constituent of crushed concrete aggregate.
[Aut.]: Mohamed Alwaeli, Jacek Gołaszewski, Jan Pizoń, Ada Andrzejewska, Patryk Szwan, Karolina Ceglarz, Wojciech Buchta, Tomasz Jachnik, Jakub Złotoś.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 032087 s. 1-10, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

83/525
Nr opisu: 0000130128   
Metals recovery from e-scrap using gravity, electrostatic and magnetic separations.
[Aut.]: D. Franke, Tomasz Suponik.
W: Innovative Mining Technologies. IMTech 2019 Scientific and Technical Conference, 25-27 March 2019, Szczyrk, Poland [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012016 s. 1-9, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 545 1757-8981)

84/525
Nr opisu: 0000128572   
Microclimate in buildings and the quality of life in the context of architectural design.
[Aut.]: Beata Majerska-Pałubicka, Jerzy Cibis.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 092013 s. 1-9, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

85/525
Nr opisu: 0000131416   
Microstructure of high C3A Portland slag cement pastes, modified with accelerating admixtures for concrete.
[Aut.]: Jan Pizoń, Beata Łaźniewska-Piekarczyk.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 032089 s. 1-10, bibliogr. 26 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

86/525
Nr opisu: 0000129373   
Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek.
Bristol : Institute of Physics, 2019, (plik pdf) 696 s.
(IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

87/525
Nr opisu: 0000131531   
Mixed-model assembly line balancing problem with tasks assignment.
[Aut.]: Karol Dziki, Damian Krenczyk.
W: Modern Technologies in Industrial Engineering VII. ModTech 2019, 19-22 June 2019, Iasi, Romania. Bristol : Institute of Physics Publishing, 2019, art. no. 012013 s. 1-8, bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 591 1757-8981)

88/525
Nr opisu: 0000128575   
Models for architecture of contemporary medium-density mixed-use buildings - case studies from Gliwice, Poland.
[Aut.]: Tomasz Bradecki.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 092068 s. 1-10, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

89/525
Nr opisu: 0000131070
Modern Technologies in Industrial Engineering VII. ModTech 2019, 19-22 June 2019, Iasi, Romania.
Bristol : Institute of Physics Publishing, 2019, 912 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 591 1757-8981)
Publikacja nie należy do bibliografii Uczelni

90/525
Nr opisu: 0000131405   
Modernity in architecture - Tokyo, Osaka, Dubai, Gdańsk, Katowice.
[Aut.]: Klaudiusz Fross, Anna Gumińska.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 022089 s. 1-12, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

91/525
Nr opisu: 0000128478   
Moistening of walls caused by damage to terraces - research studies and numerical simulations.
[Aut.]: Jan Ślusarek, Paweł Krause, Agnieszka Szymanowska-Gwiżdż.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 082051 s. 1-10, bibliogr. 18 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

92/525
Nr opisu: 0000128562   
Moving and straightening the building segment.
[Aut.]: Krzysztof Gromysz.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 052026 s. 1-11, bibliogr. 5 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

93/525
Nr opisu: 0000128588   
Numerical research of oxidation zone variation in goaf of longwalls U-type system from borders and U-type system to the borders ventilated.
[Aut.]: Magdalena Tutak.
W: World Multidisciplinary Earth Sciences Symposium (WMESS 2018), 3-7 September 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012090 s. 1-10, bibliogr. 13 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 221 1755-1315)

94/525
Nr opisu: 0000128571   
Open living concept in barn-house architecture: single-family house case studies.
[Aut.]: Tomasz Bradecki, B. Uherek-Bradecka.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 082055 s. 1-8, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

95/525
Nr opisu: 0000129568   
Petrograhpic characteristics of coal from waste dump of abandoned mine Gruve 2 in Longyearbyen, Svalbard.
[Aut.]: Jacek Nowak, Magdalena Kokowska-Pawłowska, Łukasz Gawor.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012036 s. 1-11, bibliogr. 22 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

96/525
Nr opisu: 0000129507   
Petrographic analysis of hard coal in grain class <1mm.
[Aut.]: Marek Marcisz, B. Marcisz.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012030 s. 1-10, bibliogr. 12 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

97/525
Nr opisu: 0000129279   
Program supporting the assessment of occupational risk - harmful factors.
[Aut.]: Piotr Mocek.
W: World Multidisciplinary Earth Sciences Symposium (WMESS 2018), 3-7 September 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012032 s. 1-12, bibliogr. 8 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 221 1755-1315)

98/525
Nr opisu: 0000128563   
Properties of beam-to-column joint in steel-concrete composite frame unpropped or partly propped during slab execution.
[Aut.]: Grzegorz Gremza.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 052027 s. 1-10, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

99/525
Nr opisu: 0000128583   
Qualitative research of contemporary architecture and space of European cities in the aspect of correlation: the principles of a sustainable environment, the perception of space and technological solutions of objects.
[Aut.]: Anna Gumińska.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 102066 s. 1-11, bibliogr. 18 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

100/525
Nr opisu: 0000129553   
Quality of organic matter of the Lublin Formation in the Lublin Coal Basin (Poland).
[Aut.]: Ewa Krzeszowska.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012023 s. 1-11, bibliogr. 18 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

101/525
Nr opisu: 0000128582   
Re-thinking post-mining areas reclamation in 21st century.
[Aut.]: Katarzyna Mazur-Belzyt.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 102055 s. 1-11, bibliogr. 17 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

102/525
Nr opisu: 0000131423   
Rectification of walls of the historical brick barrack on the site of the former German Nazi Concentration and Extermination Camp KL Auschwitz - Birkenau.
[Aut.]: Krzysztof Gromysz, Ł. Szoblik, E. Cyrulik, A. Tanistra-Różanowska, Z. Drabczyk, S. Jancia.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 042070 s. 1-12, bibliogr. 5 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

103/525
Nr opisu: 0000129408   
Reducing the methane hazard in the longwalls by means of methane removal from the goafs.
[Aut.]: Jan** Drenda, Jan Kania, Józef Markowicz.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art no. 012006 s. 1-5, bibliogr. 10 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

104/525
Nr opisu: 0000128391   
Relation between the theoretical and average observed curvatures of mining terrain.
[Aut.]: Justyna Orwat.
W: International Conference on Applied Sciences, 9-11 May 2018, Banja Luke, Bosnia and Herzegovina [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012043 s. 1-10, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 477 1757-8981)

przeciętne obserwowane krzywizny terenu górniczego ; teoretyczne krzywizny terenu górniczego ; splajn wygładzony ; ciągłe deformacje górnicze ; prognozowanie deformacji

approximated observed mining terrain curvatures ; theoretical mining terrain curvatures ; smooth spline ; continuous mining deformations ; deformation prediction

105/525
Nr opisu: 0000128491   
Relationship between air-content in fresh cement paste, mortar, mix and hardened concrete acc. to PN-EN 480-1 with air-entraining CEM II/B-V.
[Aut.]: Beata Łaźniewska-Piekarczyk, Jacek Gołaszewski.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 032044 s. 1-12, bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

106/525
Nr opisu: 0000131378   
Research of behaviour of bed joints reinforced masonry walls with openings made of autoclaved aerated concrete under horizontal shearing.
[Aut.]: Radosław Jasiński.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 022102 s. 1-11, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

konstrukcja murowa ; ściana usztywniająca ; ściana z otworami ; zbrojenie w spoinach wspornych ; ścinanie poziome

masonry structure ; shear wall ; wall with openings ; bed joint reinforcement ; horizontal shearing

107/525
Nr opisu: 0000128447   
Research of influence of the shape of unreinforced masonry shear walls made of calcium silicate masonry units.
[Aut.]: Radosław Jasiński.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art no. 022009 s. 1-12, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

silikatowy element murowy ; ściana ścinana ; kształt ściany murowej ; wymiar ściany murowej

calcium silicate masonry unit ; shear wall ; shape of masonry wall ; size of masonry wall

108/525
Nr opisu: 0000128564   
Resistance of steel - concrete composite girders with corrugated web.
[Aut.]: Grzegorz Gremza, Witold Basiński.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 052028 s. 1-11, bibliogr. 14 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

109/525
Nr opisu: 0000130125   
Review of technologies for low-quality solid fuel gasification.
[Aut.]: A. Lutyński, Marcin Lutyński.
W: Innovative Mining Technologies. IMTech 2019 Scientific and Technical Conference, 25-27 March 2019, Szczyrk, Poland [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012012 s. 1-9, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 545 1757-8981)

110/525
Nr opisu: 0000128560   
Revitalisation of a vertically deflected historical 16th century bell tower.
[Aut.]: Krzysztof Gromysz.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 052025 s. 1-11, bibliogr. 3 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

111/525
Nr opisu: 0000131404   
Revitalization of buildings and urban areas on the example of Gdańsk, Venice, Milano and Zabrze.
[Aut.]: Klaudiusz Fross, Anna Gumińska.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 022088 s. 1-11, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

112/525
Nr opisu: 0000128577   
Role of accelerators in development of the entrepreneurial ecosystem as a part of the regional economic development strategy.
[Aut.]: Magdalena Gębczyńska, Anna Kwiotkowska.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 102013 s. 1-10, bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

113/525
Nr opisu: 0000128568   
Selected bearing problems of old railway bridges located on mining areas in Poland.
[Aut.]: Piotr Bętkowski.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 052068 s. 1-11, bibliogr. 19 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

114/525
Nr opisu: 0000128554   
Shear buckling resistance of corrugated web girders reinforced with tensioned diagonal braces.
[Aut.]: Witold Basiński.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 052004 s. 1-11, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

115/525
Nr opisu: 0000128474   
Shear capacity of the zone of supporting of precast lintels made of AAC.
[Aut.]: Wojciech Mazur, Radosław Jasiński, Łukasz Drobiec.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 052070 s. 1-9, bibliogr. 10 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

autoklawizowany beton komórkowy ; ABK ; nadproże prefabrykowane ; strefa podporowa ; ścinanie

autoclaved aerated concrete ; AAC ; precast lintel ; support zone ; shear

116/525
Nr opisu: 0000129515   
Signal processing from a detector of a radiometric density meter - results of empirical studies.
[Aut.]: S. Cierpisz, Jarosław Joostberens, W. Sobierajski.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012005 s. 1-13, bibliogr. 6 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

117/525
Nr opisu: 0000129557   
Simulation of earth faults in parallel lines in mine medium voltage networks.
[Aut.]: Krzysztof Kuliński.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012025 s. 1-10, bibliogr. 9 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

118/525
Nr opisu: 0000131530   
Spearman's rho modification in digital image processing.
[Aut.]: Bartłomiej Nalepa, Aleksander Gwiazda.
W: Modern Technologies in Industrial Engineering VII. ModTech 2019, 19-22 June 2019, Iasi, Romania. Bristol : Institute of Physics Publishing, 2019, art. no. 012060 s. 1-9, bibliogr. 17 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 591 1757-8981)

119/525
Nr opisu: 0000128461   
Static analysis of prestressed floor slabs HC500 with changes in tendon adhesion to concrete induced by penetration of chloride ions.
[Aut.]: Zofia Szweda, Radosław Jasiński.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 052035 s. 1-11, bibliogr. 19 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

konstrukcja sprężona ; płyta kanałowa ; korozja chlorkowa

prestressed construction ; hollow-core slab ; chloride corrosion

120/525
Nr opisu: 0000131401   
Strength of unreinforced joints of masonry walls made of AAC masonry units.
[Aut.]: Radosław Jasiński, Iwona Galman.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 032075 s. 1-7, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

ściana murowa ; połączenie niezbrojone ; wytrzymałość na ścinanie ; autoklawizowany beton komórkowy

masonry wall ; unreinforced joint ; shear strength ; autoclaved aerated concrete

121/525
Nr opisu: 0000131420   
Studies on reconstruction of the Holy Cross wooden church in Wodzisław Śląski.
[Aut.]: Jerzy Pocisk-Dobrowolski.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 042020 s. 1-7, bibliogr. 4 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

122/525
Nr opisu: 0000131417   
Surrealistic historical park in Rabka.
[Aut.]: Krzysztof Marek Rostański.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 032099 s. 1-11, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

123/525
Nr opisu: 0000128580   
Sustainable land use principle as employed in the revitalization of a zinc spoil heap located in Ruda Slaska, Poland.
[Aut.]: Krzysztof Marek Rostański.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 102019 s. 1-10, bibliogr. 5 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

124/525
Nr opisu: 0000129537   
Synthetic assessment of mining rescuers' behavior according to the parameter "coping with occupational stress".
[Aut.]: Aneta Grodzicka.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012011 s. 1-8, bibliogr. 11 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

125/525
Nr opisu: 0000129584   
Terrain discontinuous deformations created near underground technical infrastructure.
[Aut.]: Katarzyna Szafulera.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012051 s. 1-10, bibliogr. 24 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

126/525
Nr opisu: 0000129583   
The application of thermal analysis in testing the combustibility of timber used in supporting of mine roadways.
[Aut.]: Ewa Strzałkowska.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012049 s. 1-9, bibliogr. 20 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

127/525
Nr opisu: 0000129560   
The concept of coke based proppants for coal bed fracturing.
[Aut.]: Krzysztof Labus, Rafał Morga, Tomasz Suponik, M. Masłowski, K. Wilk, P. Kasza.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012026 s. 1-12, bibliogr. 59 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

128/525
Nr opisu: 0000128570   
The creation and perception of underwater built environment or architecture.
[Aut.]: Zbyszko Bujniewicz.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 072012 s. 1-6, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

129/525
Nr opisu: 0000131541   
The impact of selected CNC machining parameters on the surface roughness of the 7075 aluminium alloy.
[Aut.]: Michał Sobek, Łukasz Grabowski.
W: Modern Technologies in Industrial Engineering VII. ModTech 2019, 19-22 June 2019, Iasi, Romania. Bristol : Institute of Physics Publishing, 2019, art. no. 012031 s. 1-7, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 591 1757-8981)

130/525
Nr opisu: 0000129569   
The impact of selected structural and operational factors on load bearing capacity of the powered roof support.
[Aut.]: Arkadiusz Pawlikowski.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012039 s. 1-13, bibliogr. 14 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

131/525
Nr opisu: 0000128556   
The influence of compressive stress on the load-bearing capacity of masonry subjected to vertical displacements.
[Aut.]: Adam Piekarczyk.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 052017 s. 1-11, bibliogr. 22 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

132/525
Nr opisu: 0000129585   
The influence of extraction field discretization on the quality of predictions of post-mining deformations.
[Aut.]: Roman Ścigała.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012053 s. 1-10, bibliogr. 13 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

133/525
Nr opisu: 0000129573   
The influence of increased proportion of mixing water in a hydromixture made on the basis of selected energy waste on the gravity performance of a transport installation.
[Aut.]: Marcin Popczyk.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012043 s. 1-8, bibliogr. 11 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

134/525
Nr opisu: 0000129547   
The influence of para-seismic vibrations induced by blasting works on construction structures: a case study of the ABC opencast gypsum mine.
[Aut.]: Marcin Kraszewski.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012021 s. 1-11, bibliogr. 6 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

135/525
Nr opisu: 0000130119   
The influence of the methodology for slopes forming in open pit mines on their stability.
[Aut.]: Tadeusz Mzyk, Rafał Jendruś.
W: Innovative Mining Technologies. IMTech 2019 Scientific and Technical Conference, 25-27 March 2019, Szczyrk, Poland [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012013 s. 1-10, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 545 1757-8981)

136/525
Nr opisu: 0000130124   
The influence of the type of fly ash on selected physical properties of their water mixtures (multiphase mixtures).
[Aut.]: Piotr Pierzyna.
W: Innovative Mining Technologies. IMTech 2019 Scientific and Technical Conference, 25-27 March 2019, Szczyrk, Poland [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012004 s. 1-11, bibliogr. 14 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 545 1757-8981)

137/525
Nr opisu: 0000128508
The remains of the bridges.
[Aut.]: Szymon Opania, Marek Salamak.
W: 3rd World Multidisciplinary Civil Engineering, Architecture, Urban Planning Symposium (WMCAUS 2018), 18-22 June 2018, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 092001 s. 1-10, bibliogr. 10 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 471 1757-8981)

138/525
Nr opisu: 0000131393   
The students' competition for the interior design of paediatric department of the city hospital: methodology of a pre-design research and project describing.
[Aut.]: Dorota Winnicka-Jasłowska.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 022041 s. 1-7, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

139/525
Nr opisu: 0000131480   
The use of the NX mechatronic module to simulate of a simple machine work.
[Aut.]: Kamil Lysek, Aleksander Gwiazda, Krzysztof Herbuś.
W: Modern Technologies in Industrial Engineering VII. ModTech 2019, 19-22 June 2019, Iasi, Romania. Bristol : Institute of Physics Publishing, 2019, art. no. 012055 s. 1-7, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 591 1757-8981)

140/525
Nr opisu: 0000131071   
Thermal cutting of thermomechanically rolled S700MC and heat-treated S690QL steels.
[Aut.]: Jacek Górka, Tomasz Poloczek.
W: Modern Technologies in Industrial Engineering VII. ModTech 2019, 19-22 June 2019, Iasi, Romania. Bristol : Institute of Physics Publishing, 2019, art. no. 012018 s. 1-10, bibliogr. 7 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 591 1757-8981)

141/525
Nr opisu: 0000129546   
Tremors and rock bursts hazards characteristics using the digital model of the deposit in KWK ROW Site Marcel.
[Aut.]: J. Kowalczuk, A. Hadam, Marian Poniewiera.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012020 s. 1-12, bibliogr. 14 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

142/525
Nr opisu: 0000130127   
Underground coal mine workings as potential places for Compressed Air Energy Storage.
[Aut.]: Marcin Lutyński, Łukasz Bartela, Grzegorz Smolnik, S. Waniczek.
W: Innovative Mining Technologies. IMTech 2019 Scientific and Technical Conference, 25-27 March 2019, Szczyrk, Poland [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012014 s. 1-11, bibliogr. 14 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 545 1757-8981)

143/525
Nr opisu: 0000129570   
Utilization of the secondary hard coal preparation in clean coal technologies.
[Aut.]: Joachim Pielot.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012040 s. 1-11, bibliogr. 37 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

144/525
Nr opisu: 0000131382   
Validation of elastic-brittle, and elastic-plastic FEM model of the wall made of calcium silicate and AAC masonry units.
[Aut.]: Radosław Jasiński.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 032001 s. 1-11, bibliogr. 18 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

powierzchnia plastyczności Menetrey'a-Willama ; konstrukcja murowa ; modelowanie MES ; autoklawizowany beton komórkowy ; silikatowy element murowy

Menetrey-Willam plasticity surface ; masonry structure ; FEM modelling ; autoclaved aerated concrete ; calcium silicate masonry unit

145/525
Nr opisu: 0000131428   
Variations of ground temperature in shallow depths in the Silesian region.
[Aut.]: Iwona Pokorska-Silva, M. Kadela, L. Fedorowicz.
W: 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, 17-21 June 2019, Prague, Czech Republic [online]. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 052024 s. 1-11, bibliogr. 48 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 603 1757-8981)

146/525
Nr opisu: 0000129520   
Vibration damping in torsionally flexible metal clutch for applications in mining machines.
[Aut.]: Krzysztof Filipowicz.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012010 s. 1-9, bibliogr. 9 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

147/525
Nr opisu: 0000129564   
Working conditions and retirement privileges on the example of mining.
[Aut.]: Ewa Monika Matuszewska-Majcher.
W: Mining of Sustainable Development, 28 November 2018, Gliwice, Poland [online]. Eds. Iwona Jonczy, Joanna Komorek. Bristol : Institute of Physics, 2019, (plik pdf) art. no. 012031 s. 1-6, bibliogr. 7 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 261 1755-1315)

148/525
Nr opisu: 0000128586   
World Multidisciplinary Earth Sciences Symposium (WMESS 2018), 3-7 September 2018, Prague, Czech Republic [online].
Bristol : Institute of Physics, 2019, (plik pdf) 1200 s.
(IOP Conference Series ; Earth and Environmental Science ; vol. 221 1755-1315)
Publikacja nie należy do bibliografii UczelniDostępny w Internecie: https://iopscience.iop.org/issue/1755-1315/221/1 [dostęp 5 marca 2019]

149/525
Nr opisu: 0000124323   
4th Polish Mining Congress - Session: Human and environment facing the challenges of mining, 20-22 November 2017, Krakow, Poland [online].
Bristol : Institute of Physics, 2018, (plik pdf) 190 s.
(IOP Conference Series ; Earth and Environmental Science ; vol. 174 1755-1315)
Publikacja nie należy do bibliografii Uczelni

150/525
Nr opisu: 0000122757
5th Annual International Conference on Material Science and Environmental Engineering. MSEE 2017, Xiamen, China, 15-17 December 2017. Ed. K. Wang.
Bristol : Institute of Physics Publishing, 2018, 1512 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 301, conference 1 1757-8981)
Publikacja nie należy do bibliografii Uczelni

151/525
Nr opisu: 0000124556   
5th Global Conference on Polymer and Composite Materials. PCM 2018, 10-13 April 2018, Kitakyushu City, Japan.
Bristol : Institute of Physics Publishing, 2018, 390 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 369, conference 1 1757-8981)
Publikacja nie należy do bibliografii Uczelni

152/525
Nr opisu: 0000122969   
5th International Conference on Mechanical Engineering, Materials Science and Civil Engineering. ICMEMSCE2017, 15-16 December 2017, Kuala Lumpur, Malaysia.
Bristol : Institute of Physics, 2018, 540 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 324, conference 1 1757-8981)
Publikacja nie należy do bibliografii Uczelni

153/525
Nr opisu: 0000124933   
8th International Scientific Colloquium on Modelling for Materials Processing, Riga, Latvia, 21-22 September 2017. Ed. A. Jakovics, M. Scepanskis.
Bristol : Institute of Physics Publishing, 2018, 200 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 355, iss. 1 1757-8981)
Publikacja nie należy do bibliografii Uczelni

154/525
Nr opisu: 0000126424
9th International Symposium on Electromagnetic Processing of Materials. EPM2018, Hyogo, Japan, 14-18 October 2018. Proceedings.
Bristol : Institute of Physics, 2018, 650 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 424 1757-8981)
Publikacja nie należy do bibliografii Uczelni

155/525
Nr opisu: 0000125859   
A computer simulation as a tool for a production system analysis and optimization.
[Aut.]: Cezary Grabowik, Krzysztof Kalinowski, Grzegorz Ćwikła, Katarzyna Niemiec, Iwona Paprocka.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022033 s. 1-15, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

156/525
Nr opisu: 0000125929   
A substitute circuit of the piezoelectric transformer transmitting longitudinal vibrations.
[Aut.]: Marek Płaczek, Andrzej Wróbel.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 042047 s. 1-7, bibliogr. 22 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

157/525
Nr opisu: 0000126960   
Algorithm of transformation between the local system Borowa Góra and the state system PL-2000 on the example of PG Silesia.
[Aut.]: Violetta Sokoła-Szewioła, Marian Poniewiera, Maciej Pomykoł.
W: Mining - prospects and threats. Coal - cheap, clean energy and workplaces, 8-10 May 2018, Rybnik, Poland [online]. Bristol : Institute of Physics, 2018, (plik pdf) art. 012014 s. 1-10, bibliogr. 10 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 198 1755-1315)

158/525
Nr opisu: 0000125992
Analysis of complex manufacturing processes scheduling in different advanced informatics environments.
[Aut.]: Zbigniew Monica, Wacław Banaś, Grzegorz Ćwikła.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 062020 s. 1-6, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

159/525
Nr opisu: 0000126956   
Analysis of costs of prevention against spontaneous fire hazard based on selected longwalls.
[Aut.]: Dariusz Musioł, Aneta Grodzicka.
W: Mining - prospects and threats. Coal - cheap, clean energy and workplaces, 8-10 May 2018, Rybnik, Poland [online]. Bristol : Institute of Physics, 2018, (plik pdf) art. 012009 s. 1-13, bibliogr. 12 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 198 1755-1315)

160/525
Nr opisu: 0000125594   
Analysis of improving the quality of coal slurry based on the use of regression models.
[Aut.]: Anna Manowska, M. Mazurek.
W: Mineral Engineering Conference. MEC 2018, 26-29 September 2018, Zawiercie, Poland [online]. Bristol : Institute of Physics Publishing, 2018, (plik pdf) art. 012038 s. 1-11, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 427 1757-8981)

161/525
Nr opisu: 0000126954   
Analysis of SRK S.A. mining rescue costs.
[Aut.]: Piotr Mocek.
W: Mining - prospects and threats. Coal - cheap, clean energy and workplaces, 8-10 May 2018, Rybnik, Poland [online]. Bristol : Institute of Physics, 2018, (plik pdf) art. 012007 s. 1-12, bibliogr. 8 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 198 1755-1315)

162/525
Nr opisu: 0000124932   
Analysis of the impact of modification of cold crucible design on the efficiency of the cold crucible induction furnace.
[Aut.]: Roman Przyłucki, Sławomir Golak, Piotr Buliński, Jacek Smołka, Michał Palacz, Grzegorz Siwiec, Jakub* Lipart, Leszek Blacha.
W: 8th International Scientific Colloquium on Modelling for Materials Processing, Riga, Latvia, 21-22 September 2017. Ed. A. Jakovics, M. Scepanskis. Bristol : Institute of Physics Publishing, 2018, s. 1-7, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 355, iss. 1 1757-8981)

163/525
Nr opisu: 0000126944   
Analysis of the motivational nature of remuneration in the light of production and efficiency in hard coal mining in Poland.
[Aut.]: Małgorzata Wyganowska.
W: Mining - prospects and threats. Coal - cheap, clean energy and workplaces, 8-10 May 2018, Rybnik, Poland [online]. Bristol : Institute of Physics, 2018, (plik pdf) art. 012017 s. 1-9, bibliogr. 8 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 198 1755-1315)

164/525
Nr opisu: 0000125592
Analysis of the working chamber size influence on the effectiveness of grinding in electromagnetic mill.
[Aut.]: D. Krawczykowski, D. Foszcz, Szymon Ogonowski, T. Gawenda, M. Wołosiewicz-Głąb.
W: Mineral Engineering Conference. MEC 2018, 26-29 September 2018, Zawiercie, Poland [online]. Bristol : Institute of Physics Publishing, 2018, (plik pdf) art. 012033 s. 1-15, bibliogr. 24 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 427 1757-8981)

165/525
Nr opisu: 0000125924   
Application of CAM systems to simulate of a milling machine work.
[Aut.]: Kamil Lysek, Aleksander Gwiazda, Krzysztof Herbuś.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 042037 s. 1-6, bibliogr. 6 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

166/525
Nr opisu: 0000124332   
Application of petrophysical shale gas model for CO2 storage capacity assessment of coals.
[Aut.]: Marcin Popczyk, L. Zavanella.
W: 4th Polish Mining Congress - Session: Human and environment facing the challenges of mining, 20-22 November 2017, Krakow, Poland (online). Bristol : Institute of Physics, 2018, (plik pdf) art. 012005 s. 1-7, bibliogr. 5 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 174 1755-1315)

167/525
Nr opisu: 0000121111   
Appraisal of application possibilities of smoothed splines to designation of the average values of terrain curvatures measured after the termination of hard coal exploitation conducted at medium depth.
[Aut.]: Justyna Orwat.
W: International Conference on Applied Sciences (ICAS2017), 10-12 May 2017, Hunedoara, Romania. Bristol : Institute of Physics, 2018, art. 012030 s. 1-10, bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 294, conference 1 1757-8981)

krzywizna terenu górniczego ; aproksymacja ; przebieg przeciętny ; wygładzone funkcje sklejane

curvature of mining area ; approximation ; average graph ; smoothed spline functions

168/525
Nr opisu: 0000125948   
Assessment of the efficiency of the continuous improvement system based on Kaizen in an example company.
[Aut.]: Grzegorz Ćwikła, Aleksander Gwiazda, Wacław Banaś, Zbigniew Monica, Krzysztof Foit.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 062008 s. 1-11, bibliogr. 30 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

169/525
Nr opisu: 0000125773   
Biomineralization of calcium carbonate controlled by biomolecules produced by Bacillus sp..
[Aut.]: A. Bastrzyk, I. Polowczyk, K. J. Legawiec, J. Chojniak, K. Paraszkiewicz, Grażyna Płaza.
W: Mineral Engineering Conference. MEC 2018, 26-29 September 2018, Zawiercie, Poland [online]. Bristol : Institute of Physics Publishing, 2018, (plik pdf) art. 012022 s. 1-7, bibliogr. 9 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 427 1757-8981)

170/525
Nr opisu: 0000126958   
Calculation of object deformation category considering date of its construction.
[Aut.]: Marian Poniewiera.
W: Mining - prospects and threats. Coal - cheap, clean energy and workplaces, 8-10 May 2018, Rybnik, Poland [online]. Bristol : Institute of Physics, 2018, (plik pdf) art. 012012 s. 1-14, bibliogr. 6 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 198 1755-1315)

171/525
Nr opisu: 0000126089   
Car-sharing in the context of car operation.
[Aut.]: Katarzyna Turoń, Andrzej Kubik, Bogusław Łazarz, Piotr Czech, Zbigniew Stanik.
W: International Automotive Conference. KONMOT2018, 13-14 September 2018, Krakow, Poland. Bristol : Institute of Physics Publishing, 2018, art. no. 032027 s. 1-10, bibliogr. 34 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 421, Exploitation of automobiles 1757-8981)

172/525
Nr opisu: 0000122789   
Casting molding of PDCPD material for purpose of car's power steering body.
[Aut.]: Łukasz Grabowski, Andrzej Baier, Michał Sobek.
W: 5th Annual International Conference on Material Science and Environmental Engineering. MSEE 2017, Xiamen, China, 15-17 December 2017. Ed. K. Wang. Bristol : Institute of Physics Publishing, 2018, art. 012049 s. 1-6, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 301, conference 1 1757-8981)

173/525
Nr opisu: 0000124333   
Changing the mining industry in the heart of Silesia.
[Aut.]: Zygmunt Łukaszczyk, Marcin Popczyk.
W: 4th Polish Mining Congress - Session: Human and environment facing the challenges of mining, 20-22 November 2017, Krakow, Poland (online). Bristol : Institute of Physics, 2018, (plik pdf) art. 012006 s. 1-10, bibliogr. 9 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 174 1755-1315)

174/525
Nr opisu: 0000125991   
Collecting data from industrial sensors in case of 4-th industrial revolution.
[Aut.]: Piotr Michalski.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 062019 s. 1-6, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

175/525
Nr opisu: 0000122970   
Combined experimental and numerical study on fracture behaviour of low-density foamed concrete.
[Aut.]: Marcin Kozłowski, M. Kadela.
W: 5th International Conference on Mechanical Engineering, Materials Science and Civil Engineering. ICMEMSCE2017, 15-16 December 2017, Kuala Lumpur, Malaysia. Bristol : Institute of Physics, 2018, art. 012031 s. 1-6, bibliogr. 22 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 324, conference 1 1757-8981)

pianobeton ; analiza numeryczna ; badania laboratoryjne

foamed concrete ; numerical analysis ; experimental test

176/525
Nr opisu: 0000124934
Comparison of single and consecutive dual frequency induction surface hardening of gear wheels.
[Aut.]: Jerzy Barglik, Kazimierz** Ducki, D. Kukla, J. Mizera, G. Mrówka-Nowotnik, J. Sieniawski, Albert Smalcerz.
W: 8th International Scientific Colloquium on Modelling for Materials Processing, Riga, Latvia, 21-22 September 2017. Ed. A. Jakovics, M. Scepanskis. Bristol : Institute of Physics Publishing, 2018, s. 1-8, bibliogr. 6 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 355, iss. 1 1757-8981)

177/525
Nr opisu: 0000125915   
Complex technical systems modelling and their mechatronics function simulation.
[Aut.]: Aleksander Gwiazda, Wacław Banaś, Agnieszka Sękala, Grzegorz Ćwikła, Małgorzata* Sokół.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 042028 s. 1-7, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

178/525
Nr opisu: 0000126647   
Concept of the FMEA method-based model supporting proactive and preventive maintenance activities.
[Aut.]: Mariusz Piechowski, P. Szafer, Ryszard Wyczółkowski, V. Gładysiak.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 062023 s. 1-12, bibliogr. 24 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

179/525
Nr opisu: 0000126946   
Daily coal mining as a factor influencing methane concentration at a longwall - a case study.
[Aut.]: Henryk** Badura, Zygmunt Łukaszczyk.
W: Mining - prospects and threats. Coal - cheap, clean energy and workplaces, 8-10 May 2018, Rybnik, Poland [online]. Bristol : Institute of Physics, 2018, (plik pdf) art. 012001 s. 1-17, bibliogr. 14 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 198 1755-1315)

180/525
Nr opisu: 0000125950   
Decomposition of electric machines with particular emphasis of the squirrel-cage induction motors.
[Aut.]: Mariusz Hetmańczyk.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 062013 s. 1-6, bibliogr. 19 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

181/525
Nr opisu: 0000124341   
Design of underground mine voids filling operations in difficult flow conditions of fly ash - water mixtures.
[Aut.]: Grzegorz Strozik.
W: 4th Polish Mining Congress - Session: Human and environment facing the challenges of mining, 20-22 November 2017, Krakow, Poland (online). Bristol : Institute of Physics, 2018, (plik pdf) art. 012014 s. 1-9, bibliogr. 11 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 174 1755-1315)

182/525
Nr opisu: 0000125901   
Electromagnetic compatibility tests of a measuring system based on MFC piezoelectric transducers.
[Aut.]: Marek Płaczek, Michał Maćkowski.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022046 s. 1-8, bibliogr. 29 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

183/525
Nr opisu: 0000128075
Electrospinning process and characterization of PVP/hematite nanofibers.
[Aut.]: Wiktor Matysiak, Tomasz Tański, Marta Zaborowska.
W: 5th International Conference Recent Trends in Structural Materials, 14-16 November 2018, Pilsen, Czech Republic. Bristol : Institute of Physics Publishing, 2018, art. no. 012050 s. 1-6, bibliogr. 20 poz. (IOP Conference Series ; vol. 461 1757-8981)

184/525
Nr opisu: 0000124066   
Environmental aspects of the implementation of geogrids for pavement optimisation.
[Aut.]: Jacek Kawalec, M. Gołos, P. Mazurowski.
W: Resilient and safe road infrastructure, 8-9 May 2018, Kielce, Poland. Bristol : Institute of Physics, 2018, art. 012018 s. 1-11, bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 356, conference 1 1757-8981)

185/525
Nr opisu: 0000124331
Environmental problems on the areas of redeveloped hard coal deposits.
[Aut.]: Henryk Kleta, Franciszek Plewa.
W: 4th Polish Mining Congress - Session: Human and environment facing the challenges of mining, 20-22 November 2017, Krakow, Poland (online). Bristol : Institute of Physics, 2018, (plik pdf) art. 012004 s. 1-8, bibliogr. 8 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 174 1755-1315)

186/525
Nr opisu: 0000125909   
Estimation of the power of a MFC type piezoelectric used for electric energy recovery from vibrations.
[Aut.]: Marek Płaczek, Martin Brzezny.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 032007 s. 1-6, bibliogr. 22 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

187/525
Nr opisu: 0000125934   
Experimental analysis of dynamic parameters of the robot's drive.
[Aut.]: Wacław Banaś, Aleksander Gwiazda, Agnieszka Sękala, Krzysztof Foit, Grzegorz Ćwikła.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 052001 s. 1-7, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

188/525
Nr opisu: 0000126255   
Experimental and numerical analysis of flow through catalytic converters for original part and WALKER's replacement using reverse engineering and CFD.
[Aut.]: Damian Kurzydym, Adam Klimanek, Zbigniew Żmudka.
W: International Automotive Conference. KONMOT2018, 13-14 September 2018, Krakow, Poland. Bristol : Institute of Physics Publishing, 2018, art. no. 042044 s. 1-10, bibliogr. 18 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 421, Combustion engines and emission 1757-8981)

reaktor katalityczny ; inżynieria odwrotna ; CFD ; przeciwciśnienie ; ciało porowate

catalytic converter ; reverse engineering ; CFD ; backpressure ; porous medium

189/525
Nr opisu: 0000124339   
Fire hazard in coal waste dumps - selected aspects of the environmental impact.
[Aut.]: Zenon Różański.
W: 4th Polish Mining Congress - Session: Human and environment facing the challenges of mining, 20-22 November 2017, Krakow, Poland (online). Bristol : Institute of Physics, 2018, (plik pdf) art. 012013 s. 1-13, bibliogr. 35 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 174 1755-1315)

190/525
Nr opisu: 0000124334   
Forecast of influences of exploitation conducted in rock mass degraded by the previous activity of the "Bobrek" Coal Mine on the building of historical church in Miechowice.
[Aut.]: Ryszard Mielimąka, Franciszek Plewa.
W: 4th Polish Mining Congress - Session: Human and environment facing the challenges of mining, 20-22 November 2017, Krakow, Poland (online). Bristol : Institute of Physics, 2018, (plik pdf) art. 012008 s. 1-10, bibliogr. 9 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 174 1755-1315)

191/525
Nr opisu: 0000124329   
Forecasting of stresses in overhead power lines running through area affected by the mining damage.
[Aut.]: Sergiusz Boron.
W: 4th Polish Mining Congress - Session: Human and environment facing the challenges of mining, 20-22 November 2017, Krakow, Poland (online). Bristol : Institute of Physics, 2018, (plik pdf) art. 012002 s. 1-7, bibliogr. 6 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 174 1755-1315)

192/525
Nr opisu: 0000126948   
Greenhouse Gas Emission Trading System in Poland - analysis of functioning.
[Aut.]: Anna Bluszcz.
W: Mining - prospects and threats. Coal - cheap, clean energy and workplaces, 8-10 May 2018, Rybnik, Poland [online]. Bristol : Institute of Physics, 2018, (plik pdf) art. 012003 s. 1-9, bibliogr. 19 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 198 1755-1315)

193/525
Nr opisu: 0000125591   
Image histogram as a tool for a coal stream homogeneity evaluation.
[Aut.]: Adam Heyduk, Jarosław Joostberens, Andrzej Nowrot, Joachim Pielot, K. Fabiańczyk.
W: Mineral Engineering Conference. MEC 2018, 26-29 September 2018, Zawiercie, Poland [online]. Bristol : Institute of Physics Publishing, 2018, (plik pdf) art. 012023 s. 1-9, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 427 1757-8981)

194/525
Nr opisu: 0000126423   
Induction contour hardening of gear wheels made of steel 300M.
[Aut.]: Jerzy Barglik.
W: 9th International Symposium on Electromagnetic Processing of Materials. EPM2018, Hyogo, Japan, 14-18 October 2018. Proceedings. Bristol : Institute of Physics, 2018, art no. 012062 s. 1-4, bibliogr. 7 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 424 1757-8981)

hartowanie indukcyjne konturowe ; austenityzacja ; zagadnienia sprzężone ; hartowanie dwuczęstotliwościowe

induction contour hardening ; austenitizing ; coupled problems ; dual frequency hardening

195/525
Nr opisu: 0000124928   
Influence of pipe roughness and coating built-up on pipe walls on the flow of solidifying non-newtonian fly ash-water mixtures in hydraulic transport systems in coal mines.
[Aut.]: Grzegorz Strozik.
W: 4th Polish Mining Congress - Session: Human and environment facing the challenges of mining, 20-22 November 2017, Krakow, Poland (online). Bristol : Institute of Physics, 2018, art. 012015 s. 1-9, bibliogr. 12 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 174 1755-1315)

196/525
Nr opisu: 0000125863   
Integration of manufacturing operations management tools and discrete event simulation.
[Aut.]: Damian Krenczyk, Wojciech Kempa, Krzysztof Kalinowski, Cezary Grabowik, Iwona Paprocka.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022037 s. 1-7, bibliogr. 17 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

197/525
Nr opisu: 0000126086   
International Automotive Conference. KONMOT2018, 13-14 September 2018, Krakow, Poland.
Bristol : Institute of Physics Publishing, 2018, 1500 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 421 1757-8981)
Publikacja nie należy do bibliografii Uczelni

198/525
Nr opisu: 0000121108
International Conference on Applied Sciences (ICAS2017), 10-12 May 2017, Hunedoara, Romania.
Bristol : Institute of Physics, 2018, 950 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 294, conference 1 1757-8981)
Publikacja nie należy do bibliografii Uczelni

199/525
Nr opisu: 0000125939   
Investigation of movement of mobile robot work.
[Aut.]: Bartłomiej Nalepa, Aleksander Gwiazda, Wacław Banaś.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 052007 s. 1-9, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

200/525
Nr opisu: 0000125906   
Joining methods in car body construction.
[Aut.]: Rafał Rząsiński, Łukasz Kochański.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022051 s. 1-8, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

201/525
Nr opisu: 0000126957   
Liquidation of shafts' workings with the use of the mobile installation.
[Aut.]: Piotr Pierzyna.
W: Mining - prospects and threats. Coal - cheap, clean energy and workplaces, 8-10 May 2018, Rybnik, Poland [online]. Bristol : Institute of Physics, 2018, (plik pdf) art. 012011 s. 1-8, bibliogr. 10 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 198 1755-1315)

202/525
Nr opisu: 0000125898   
Manage and control information flow in virtual manufacturing enterprises.
[Aut.]: Małgorzata Olender, Damian Krenczyk.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022041 s. 1-6, bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

203/525
Nr opisu: 0000126961   
Management of the post-industrial and degraded lands using ArcGIS: the Silesia region example.
[Aut.]: Violetta Sokoła-Szewioła, Monika Żogała.
W: Mining - prospects and threats. Coal - cheap, clean energy and workplaces, 8-10 May 2018, Rybnik, Poland [online]. Bristol : Institute of Physics, 2018, (plik pdf) art. 012015 s. 1-9, bibliogr. 9 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 198 1755-1315)

204/525
Nr opisu: 0000128028
Mechanical properties of dissimilar welded joints of duplex 2205 and austenitic 316L steels.
[Aut.]: Santina Topolska.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022055 s. 1-7, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

205/525
Nr opisu: 0000125919   
Mechatronics function simulation of complex technical systems using advanced design environment.
[Aut.]: Aleksander Gwiazda, Wacław Banaś, Agnieszka Sękala, Małgorzata* Sokół, Krzysztof Foit, Zbigniew Monica.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 042029 s. 1-7, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

206/525
Nr opisu: 0000128029   
Metallographic investigations of dissimilar welded joints of duplex 2205 and austenitic 316L steels.
[Aut.]: Santina Topolska.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022056 s. 1-7, bibliogr. 7 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

207/525
Nr opisu: 0000125914   
Method of vibration reduction of synthesized systems or subsystems of machines.
[Aut.]: Tomasz Dzitkowski, Andrzej Dymarek.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 042022 s. 1-12, bibliogr. 22 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

208/525
Nr opisu: 0000128078   
Microstructural evaluation of an Al-Mg alloy after ECAP and post ECAP processing.
[Aut.]: Przemysław Snopiński.
W: 5th International Conference Recent Trends in Structural Materials, 14-16 November 2018, Pilsen, Czech Republic. Bristol : Institute of Physics Publishing, 2018, art. no. 012080 s. 1-6, bibliogr. 15 poz. (IOP Conference Series ; vol. 461 1757-8981)

209/525
Nr opisu: 0000125582
Mineral Engineering Conference. MEC 2018, 26-29 September 2018, Zawiercie, Poland [online].
Bristol : Institute of Physics Publishing, 2018
(IOP Conference Series ; Materials Science and Engineering ; vol. 427 1757-8981)
Publikacja nie należy do bibliografii Uczelni

210/525
Nr opisu: 0000126936   
Mining - prospects and threats. Coal - cheap, clean energy and workplaces, 8-10 May 2018, Rybnik, Poland [online].
Bristol : Institute of Physics, 2018, (plik pdf) 180 s.
(IOP Conference Series ; Earth and Environmental Science ; vol. 198 1755-1315)
Publikacja nie należy do bibliografii Uczelni

211/525
Nr opisu: 0000125947   
Modelling of a production system using the multi-agent network approach.
[Aut.]: Agnieszka Sękala, Aleksander Gwiazda, Gabriel Kost, Wacław Banaś.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 052009 s. 1-6, bibliogr. 17 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

212/525
Nr opisu: 0000125923   
Modelling of CAM systems to simulate of a milling machine work.
[Aut.]: Kamil Lysek, Aleksander Gwiazda, Krzysztof Herbuś.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 042036 s. 1-7, bibliogr. 9 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

213/525
Nr opisu: 0000125478
ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania.
Bristol : Institute of Physics Publishing, 2018, 1809 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)
Publikacja nie należy do bibliografii Uczelni

214/525
Nr opisu: 0000125908   
Molding of auxiliary elements for molding of the power steering gear's polymers body made of PDCPD material.
[Aut.]: Łukasz Grabowski, Andrzej Baier, Michał Sobek.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 032006 s. 1-8, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

215/525
Nr opisu: 0000125587   
Monitoring of coal jig operation using a radiometric meter with a variable time of measurement.
[Aut.]: S. Cierpisz, Jarosław Joostberens.
W: Mineral Engineering Conference. MEC 2018, 26-29 September 2018, Zawiercie, Poland [online]. Bristol : Institute of Physics Publishing, 2018, (plik pdf) art. 012020 s. 1-12, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 427 1757-8981)

216/525
Nr opisu: 0000126831   
Numerical analysis of the influence of engine speed on the cylinder thermal stresses in supercharged diesel engine.
[Aut.]: Piotr Gustof, Damian Hadryś.
W: International Automotive Conference. KONMOT2018, 13-14 September 2018, Krakow, Poland. Bristol : Institute of Physics Publishing, 2018, art. no. 042026 s. 1-10, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 421, Combustion engines and emission 1757-8981)

217/525
Nr opisu: 0000125925   
Optimization of energy consumption in a designed prototype vehicle in an advanced engineering environment.
[Aut.]: Zbigniew Monica, Wacław Banaś, Grzegorz Ćwikła.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 042041 s. 1-6, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

218/525
Nr opisu: 0000125912   
Passive reduction of vibrations of building structures by means of synthesis methods.
[Aut.]: Andrzej Dymarek, Tomasz Dzitkowski.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 042021 s. 1-8, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

219/525
Nr opisu: 0000124338   
Perspective directions of the development of hydrotransport gravity mixers installations in the light of existing industrial solutions.
[Aut.]: Marcin Popczyk.
W: 4th Polish Mining Congress - Session: Human and environment facing the challenges of mining, 20-22 November 2017, Krakow, Poland (online). Bristol : Institute of Physics, 2018, (plik pdf) art. 012012 s. 1-11, bibliogr. 8 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 174 1755-1315)

220/525
Nr opisu: 0000125854   
Piezoelectric accelerometer in reduction of vibrations in mechanical systems.
[Aut.]: Katarzyna Białas.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022012 s. 1-5, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

221/525
Nr opisu: 0000124337   
Pollution of coals of the Upper Silesian Coal Basin from the perspective of the European registers of the release and transfer of pollutants to air - the case of chlorine.
[Aut.]: Sz. Pluta, Franciszek Plewa.
W: 4th Polish Mining Congress - Session: Human and environment facing the challenges of mining, 20-22 November 2017, Krakow, Poland (online). Bristol : Institute of Physics, 2018, (plik pdf) art. 012011 s. 1-5, bibliogr. 8 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 174 1755-1315)

222/525
Nr opisu: 0000125935   
Positioning a robot in a robotic cell in Tecnomatix.
[Aut.]: Wacław Banaś, Aleksander Gwiazda, Agnieszka Sękala, Krzysztof Foit, Grzegorz Ćwikła.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 052002 s. 1-6, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

223/525
Nr opisu: 0000121110   
Possibility of using the smoothed spline functions in approximation of average course of terrain inclinations caused by underground mining exploitation conducted at medium depth.
[Aut.]: Justyna Orwat.
W: International Conference on Applied Sciences (ICAS2017), 10-12 May 2017, Hunedoara, Romania. Bristol : Institute of Physics, 2018, art. 012029 s. 1-10, bibliogr. 21 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 294, conference 1 1757-8981)

nachylenie terenu górniczego ; aproksymacja ; przebieg przeciętny ; wygładzone funkcje sklejane

mining terrain inclination ; approximation ; average graph ; smoothed spline functions

224/525
Nr opisu: 0000125862   
Production flow planning method applied to virtual manufacturing enterprises.
[Aut.]: Damian Krenczyk, Małgorzata Olender.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022036 s. 1-7, bibliogr. 18 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

225/525
Nr opisu: 0000125951   
Production orders planning using additional backward pass scheduling approach.
[Aut.]: Krzysztof Kalinowski, Cezary Grabowik, Grzegorz Ćwikła, Iwona Paprocka, Barbara Balon.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 062015 s. 1-7, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

226/525
Nr opisu: 0000125994   
Production planning methodology in hybrid systems.
[Aut.]: Bożena Skołud, A. Szopa.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 062027 s. 1-9, bibliogr. 14 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

227/525
Nr opisu: 0000126955   
Professional stress in miners depending on the education and period of service in mining.
[Aut.]: Anna Morcinek-Słota.
W: Mining - prospects and threats. Coal - cheap, clean energy and workplaces, 8-10 May 2018, Rybnik, Poland [online]. Bristol : Institute of Physics, 2018, (plik pdf) art. 012008 s. 1-8, bibliogr. 6 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 198 1755-1315)

228/525
Nr opisu: 0000126951   
Prospects for development and hard coal economy limitations in the context of ensuring national energy security.
[Aut.]: Anna Manowska, M. Mazurek.
W: Mining - prospects and threats. Coal - cheap, clean energy and workplaces, 8-10 May 2018, Rybnik, Poland [online]. Bristol : Institute of Physics, 2018, (plik pdf) art. 012005 s. 1-9, bibliogr. 21 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 198 1755-1315)

229/525
Nr opisu: 0000126947   
Reconstruction of the acceleration field of ground vibrations taking into account the directivity of vibrations' propagation.
[Aut.]: Piotr Bańka, E. Lier.
W: Mining - prospects and threats. Coal - cheap, clean energy and workplaces, 8-10 May 2018, Rybnik, Poland [online]. Bristol : Institute of Physics, 2018, (plik pdf) art. 012002 s. 1-9, bibliogr. 7 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 198 1755-1315)

230/525
Nr opisu: 0000124065   
Repeatability of road pavement condition assessment based on three-dimensional analysis of linear accelerations of vehicles.
[Aut.]: Marcin Staniek.
W: Resilient and safe road infrastructure, 8-9 May 2018, Kielce, Poland. Bristol : Institute of Physics, 2018, art. 012021 s. 1-10, bibliogr. 22 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 356, conference 1 1757-8981)

231/525
Nr opisu: 0000125932
Replacement models in the analysis of intelligent systems.
[Aut.]: Andrzej Wróbel.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 042060 s. 1-5, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

232/525
Nr opisu: 0000124063   
Resilient and safe road infrastructure, 8-9 May 2018, Kielce, Poland.
Bristol : Institute of Physics, 2018, 320 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 356, conference 1 1757-8981)
Publikacja nie należy do bibliografii Uczelni

233/525
Nr opisu: 0000125936   
Robot learning through observation and measurement in production process.
[Aut.]: Julian Malaka.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 052005 s. 1-8, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

234/525
Nr opisu: 0000126940   
Safe and energy-efficient ventilation in mines - application of the golden ratio method in designing forced air distribution for ventilation networks.
[Aut.]: Grzegorz Pach.
W: Mining - prospects and threats. Coal - cheap, clean energy and workplaces, 8-10 May 2018, Rybnik, Poland [online]. Bristol : Institute of Physics, 2018, (plik pdf) art. 012010 s. 1-10, bibliogr. 25 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 198 1755-1315)

235/525
Nr opisu: 0000125953   
Schedule generation schemes for flexible manufacturing systems with additional resources.
[Aut.]: Krzysztof Kalinowski, Damian Krenczyk, Iwona Paprocka, Wojciech Kempa, Cezary Grabowik.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 062016 s. 1-7, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

236/525
Nr opisu: 0000124336   
Searching for dependent air currents in a mine ventilation network using the connected graph disconnection method.
[Aut.]: Grzegorz Pach.
W: 4th Polish Mining Congress - Session: Human and environment facing the challenges of mining, 20-22 November 2017, Krakow, Poland (online). Bristol : Institute of Physics, 2018, (plik pdf) art. 012010 s. 1-8, bibliogr. 12 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 174 1755-1315)

237/525
Nr opisu: 0000125902   
Selected aspects of modular fixtures design for car body production.
[Aut.]: Rafał Rząsiński, Łukasz Kochański.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022050 s. 1-9, bibliogr. 9 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

238/525
Nr opisu: 0000125895   
Selected quality indicators and methods of their measurement.
[Aut.]: Krzysztof Niemiec, Damian Krenczyk.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022039 s. 1-6, bibliogr. 17 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

239/525
Nr opisu: 0000125595   
Sorption rate of CH4 and CO2 in coal at different pressure ranges.
[Aut.]: Marcin Lutyński, L. Zavanella.
W: Mineral Engineering Conference. MEC 2018, 26-29 September 2018, Zawiercie, Poland [online]. Bristol : Institute of Physics Publishing, 2018, (plik pdf) art. 012039 s. 1-9, bibliogr. 7 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 427 1757-8981)

240/525
Nr opisu: 0000125861   
Static and dynamic properties of selected hydraulic pressure reducing.
[Aut.]: Klaudiusz Klarecki, Dominik Rabsztyn.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022035 s. 1-9, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

241/525
Nr opisu: 0000124655   
Strutting systems for deep excavations - technical challenges.
[Aut.]: H. Szabowicz, Tomasz Żyrek.
W: XXI International Scientific Conference on Advanced in Civil Engineering "Construction - The Formation of Living Environment". FORM 2018, 25-27 April 2018, Moscow, Russian Federation. Bristol : Institute of Physics Publishing, 2018, art. no. 042066 s. 1-9, bibliogr. 19 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 365 1757-8981)

woda gruntowa ; przepływ wody gruntowej ; pal ; rozwiązywanie problemów

groundwater ; groundwater flow ; pile ; problem solving

242/525
Nr opisu: 0000125853   
Studies on optimization of 3D-printed elements applied in Silesian Greenpower vehicle.
[Aut.]: Andrzej Baier, Paweł Żur, Alicja Kołodziej, Przemysław Konopka, Mateusz Komander.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022010 s. 1-8, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

243/525
Nr opisu: 0000125938   
Study of communication between driver sbRIO9632 and Raspberry Pi 3.
[Aut.]: Bartłomiej Nalepa, Aleksander Gwiazda, Wacław Banaś.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 052006 s. 1-10, bibliogr. 17 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

244/525
Nr opisu: 0000125857   
Study of inter-operational breaks impact on materials flow in flexible manufacturing system.
[Aut.]: Grzegorz Gołda, Adrian Kampa, Krzysztof Foit.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022030 s. 1-6, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

245/525
Nr opisu: 0000126953   
Subsidence through formation simulation with the use of cellular automata theory on the example of real, multilongwall example.
[Aut.]: Ryszard Mielimąka, Paweł Sikora.
W: Mining - prospects and threats. Coal - cheap, clean energy and workplaces, 8-10 May 2018, Rybnik, Poland [online]. Bristol : Institute of Physics, 2018, (plik pdf) art. 012006 s. 1-13, bibliogr. 23 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 198 1755-1315)

246/525
Nr opisu: 0000125593   
Substitution of magnetite in dense medium separation by zinc-lead waste.
[Aut.]: Dawid Gajda, Marcin Lutyński, Monika Kujawska.
W: Mineral Engineering Conference. MEC 2018, 26-29 September 2018, Zawiercie, Poland [online]. Bristol : Institute of Physics Publishing, 2018, (plik pdf) art. 012036 s. 1-8, bibliogr. 14 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 427 1757-8981)

247/525
Nr opisu: 0000124557   
Tailorable drug capacity of dexamethasone-loaded conducting polymer matrix.
[Aut.]: Katarzyna Krukiewicz.
W: 5th Global Conference on Polymer and Composite Materials. PCM 2018, 10-13 April 2018, Kitakyushu City, Japan. Bristol : Institute of Physics Publishing, 2018, art. 012002 s. 1-8, bibliogr. 18 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 369, conference 1 1757-8981)

248/525
Nr opisu: 0000125897   
Technological solutions and innovations within aerosol packaging.
[Aut.]: Katarzyna Niemiec, A. Fitrzyk, Cezary Grabowik.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022040 s. 1-7, bibliogr. 26 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

249/525
Nr opisu: 0000125910   
The alternative manufacturing process of the mechanism housing. A PDCPD based housing of the power steering system.
[Aut.]: Michał Sobek, Andrzej Baier, Łukasz Grabowski.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 032010 s. 1-7, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

250/525
Nr opisu: 0000125856   
The challenges in modelling of "Industry 4.0"-compliant manufacturing systems.
[Aut.]: Krzysztof Foit, Wacław Banaś, Grzegorz Gołda, Adrian Kampa.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022025 s. 1- 8, bibliogr. 34 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

251/525
Nr opisu: 0000125993   
The concept of a method basing on engineering knowledge and experience for adding the process of module manipulators design.
[Aut.]: Piotr Ociepka, Krzysztof Herbuś.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, no. 062021 s. 1-10, bibliogr. 24 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

252/525
Nr opisu: 0000122756   
The design and construction process of a test stand for casting the power steering's housing with the use of the PDCPD material.
[Aut.]: Michał Sobek, Andrzej Baier, Łukasz Grabowski.
W: 5th Annual International Conference on Material Science and Environmental Engineering. MSEE 2017, Xiamen, China, 15-17 December 2017. Ed. K. Wang. Bristol : Institute of Physics Publishing, 2018, art. 012045, s. 1-6, bibliogr. 10 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 301, conference 1 1757-8981)

253/525
Nr opisu: 0000125860   
The design optimisation of the self-locking moving device using CAD software.
[Aut.]: Cezary Grabowik, Krzysztof Kalinowski, Damian Krenczyk, Iwona Paprocka, Wojciech Kempa, Karol Juszczak.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022034 s. 1-11, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

254/525
Nr opisu: 0000125949   
The diagnostic classifier of the squirrel-cage induction motors with a minimal number of diagnostic premises.
[Aut.]: Mariusz Hetmańczyk.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 062012 s. 1-6, bibliogr. 18 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

255/525
Nr opisu: 0000124325   
The future of hard coal compared to other energy carriers.
[Aut.]: Anna Manowska, Aurelia Rybak.
W: 4th Polish Mining Congress - Session: Human and environment facing the challenges of mining, 20-22 November 2017, Krakow, Poland (online). Bristol : Institute of Physics, 2018, (plik pdf) art. 012007 s. 1-8, bibliogr. 15 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 174 1755-1315)

256/525
Nr opisu: 0000124327   
The induced seismicity predicting based on changes in the specific energy of elastic strain of tremor-prone rock layers.
[Aut.]: Piotr Bańka.
W: 4th Polish Mining Congress - Session: Human and environment facing the challenges of mining, 20-22 November 2017, Krakow, Poland (online). Bristol : Institute of Physics, 2018, (plik pdf) art. 012001 s. 1-12, bibliogr. 21 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 174 1755-1315)

257/525
Nr opisu: 0000125899   
The influence of algorithms for basic-schedule generation on the performance of predictive and reactive schedules.
[Aut.]: Iwona Paprocka, Cezary Grabowik, Wojciech Kempa, Damian Krenczyk, Krzysztof Kalinowski.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022042 s. 1-9, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

258/525
Nr opisu: 0000125479   
The influence of thermal cutting on the properties and quality of the cut surfaces toughened steel S 960QL.
[Aut.]: Jacek Górka, Tomasz Poloczek.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022032 s. 1-9, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

259/525
Nr opisu: 0000125911   
The initial considerations and tests on the use of real time locating system in manufacturing processes improvement.
[Aut.]: Grzegorz Ćwikła, Cezary Grabowik, Krzysztof Kalinowski, Iwona Paprocka, Wacław Banaś.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 042013 s. 1-12, bibliogr. 39 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

260/525
Nr opisu: 0000125900   
The Kanban system for the assembly process of the model of a forklift.
[Aut.]: Iwona Paprocka, Cezary Grabowik, Krzysztof Kalinowski, Grzegorz Ćwikła, Natalia* Iwaniuk, Piotr Ociepka.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022043 s. 1-9, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

261/525
Nr opisu: 0000125907   
The manufacturing method of the composite worm gear housing using the cold injection.
[Aut.]: Andrzej Baier, Krzysztof Herbuś, Piotr Ociepka.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 032002 s. 1-7, bibliogr. 19 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

262/525
Nr opisu: 0000125855   
The pneumatic and electropneumatic systems in the context of 4th industrial revolution.
[Aut.]: Krzysztof Foit, Wacław Banaś, Grzegorz Ćwikła.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022024 s. 1-6, bibliogr. 10 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

263/525
Nr opisu: 0000125477   
The quality of water jet cutting of selected construction materials.
[Aut.]: Jacek Górka, Aleksandra Kotarska.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 022031 s. 1-9, bibliogr. 18 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

264/525
Nr opisu: 0000125596   
The testing of waste from the installation of salt debris leaching.
[Aut.]: Tomasz Suponik, Piotr Pierzyna, D. Franke, Zdzisław Adamczyk.
W: Mineral Engineering Conference. MEC 2018, 26-29 September 2018, Zawiercie, Poland [online]. Bristol : Institute of Physics Publishing, 2018, (plik pdf) art. 012040 s. 1-9, bibliogr. 7 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 427 1757-8981)

265/525
Nr opisu: 0000124335   
The use of modern IT tools to acquire information about geographical space from archival maps.
[Aut.]: Aleksandra Mierzejowska.
W: 4th Polish Mining Congress - Session: Human and environment facing the challenges of mining, 20-22 November 2017, Krakow, Poland (online). Bristol : Institute of Physics, 2018, (plik pdf) art. 012009 s. 1-10, bibliogr. 21 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 174 1755-1315)

266/525
Nr opisu: 0000125586   
The use of selected structural tests in the determination of phase composition of industrial wastes based on the example of Zn-Pb slags.
[Aut.]: Iwona Jonczy.
W: Mineral Engineering Conference. MEC 2018, 26-29 September 2018, Zawiercie, Poland [online]. Bristol : Institute of Physics Publishing, 2018, (plik pdf) art. 012001 s. 1-12, bibliogr. 25 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 427 1757-8981)

267/525
Nr opisu: 0000126959   
Thermal conductivity of coal mining wastes in the thermally active zone of a waste dump - in situ study.
[Aut.]: Zenon Różański.
W: Mining - prospects and threats. Coal - cheap, clean energy and workplaces, 8-10 May 2018, Rybnik, Poland [online]. Bristol : Institute of Physics, 2018, (plik pdf) art. 012013 s. 1-8, bibliogr. 13 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 198 1755-1315)

zwałowisko odpadów powęglowych ; przewodność cieplna ; zagrożenie pożarowe

coal waste dump ; thermal conductivity ; fire hazard

268/525
Nr opisu: 0000128079   
Thermal stability and microstructure evolution of ultra-fine grained Al-Mg alloy.
[Aut.]: Przemysław Snopiński, Tomasz Tański.
W: 5th International Conference Recent Trends in Structural Materials, 14-16 November 2018, Pilsen, Czech Republic. Bristol : Institute of Physics Publishing, 2018, art. no. 012085 s. 1-6, bibliogr. 16 poz. (IOP Conference Series ; vol. 461 1757-8981)

269/525
Nr opisu: 0000124064   
Usage of digital image correlation in assessment of behavior of block element pavement structure.
[Aut.]: Marcin Grygierek, Bartłomiej Grzesik, Przemysław Rokitowski, T. Rusin.
W: Resilient and safe road infrastructure, 8-9 May 2018, Kielce, Poland. Bristol : Institute of Physics, 2018, art. 012024 s. 1-11, bibliogr. 14 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 356, conference 1 1757-8981)

270/525
Nr opisu: 0000126949   
Use of selected methods for investigating events to identify and analyse their causes.
[Aut.]: Adam Duda.
W: Mining - prospects and threats. Coal - cheap, clean energy and workplaces, 8-10 May 2018, Rybnik, Poland [online]. Bristol : Institute of Physics, 2018, (plik pdf) art. 012004 s. 1-9, bibliogr. 8 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 198 1755-1315)

271/525
Nr opisu: 0000125920   
Virtual commissioning of a robotized production cell with use of mechatronic features.
[Aut.]: Krzysztof Herbuś, Piotr Ociepka.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 042030 s. 1-7, bibliogr. 25 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

272/525
Nr opisu: 0000125996   
Visualization systems for industrial automation systems.
[Aut.]: Andrzej Wróbel, Marek Płaczek.
W: ModTech International Conference - Modern Technologies in Industrial Engineering VI. ModTech 2018, 13-16 June 2018, Constanta, Romania. Bristol : Institute of Physics Publishing, 2018, art. no. 062032 s. 1-6, bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 400 1757-8981)

273/525
Nr opisu: 0000126962   
Working competencies as a factor of building working groups in mining enterprises.
[Aut.]: Katarzyna Tobór-Osadnik.
W: Mining - prospects and threats. Coal - cheap, clean energy and workplaces, 8-10 May 2018, Rybnik, Poland [online]. Bristol : Institute of Physics, 2018, (plik pdf) art. 012016 s. 1-9, bibliogr. 13 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 198 1755-1315)

274/525
Nr opisu: 0000124343   
Working environment and observance of occupational health and safety regulations - case study.
[Aut.]: Małgorzata Wyganowska, Katarzyna Tobór-Osadnik.
W: 4th Polish Mining Congress - Session: Human and environment facing the challenges of mining, 20-22 November 2017, Krakow, Poland (online). Bristol : Institute of Physics, 2018, (plik pdf) art. 012016 s. 1-8, bibliogr. 12 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 174 1755-1315)

275/525
Nr opisu: 0000124654
XXI International Scientific Conference on Advanced in Civil Engineering "Construction - The Formation of Living Environment". FORM 2018, 25-27 April 2018, Moscow, Russian Federation.
Bristol : Institute of Physics Publishing, 2018, 860 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 365 1757-8981)
Publikacja nie należy do bibliografii Uczelni

276/525
Nr opisu: 0000119652   
'Slow' revitalization on regional scale, the example of an integrated investment project.
[Aut.]: Katarzyna Mazur-Belzyt.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 052040 s. 1-8, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

277/525
Nr opisu: 0000121279
2017 International Conference on Material Engineering and Advanced Manufacturing Technology, 25-27 August 2017, Busan, Korea.
Bristol : Institute of Physics, 2017, 180 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 282 1757-8981)
Publikacja nie należy do bibliografii Uczelni

278/525
Nr opisu: 0000119399
2017 International Conference on Materials and Intelligent Manufacturing. (ICMIM 2017) 21-23 August 2017, National University of Singapore (NUS), Singapore.
Bristol : Institute of Physics, 2017, 235 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 244 1757-8981)
Publikacja nie należy do bibliografii Uczelni

279/525
Nr opisu: 0000115981
4th International Conference on Competitive Materials and Technology Processes. IC-CMTP4, Miskolc, Hungary, 3-7 October 2016. Ed. L. A. Gomze.
Bristol : Institute of Physics, 2017, 520 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 175 1757-8981)
Publikacja nie należy do bibliografii Uczelni

280/525
Nr opisu: 0000116380
4th International Conference Recent Trends in Structural Materials. Pilsen, Czech Republic, 9-11 November 2016.
Bristol : Institute of Physics, 2017, 512 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 179 1757-8981)
Publikacja nie należy do bibliografii Uczelni

281/525
Nr opisu: 0000116385
7th International Conference on Key Engineering Materials. (ICKEM 2017) 11-13 March 2017, Penang, Malaysia.
Bristol : Institute of Physics, 2017, 320 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 201 1757-8981)
Publikacja nie należy do bibliografii Uczelni

282/525
Nr opisu: 0000120241   
Access to primary energy sources - the basis of national energy security.
[Aut.]: Jan* Szlązak, R. Szlązak.
W: The role of Polish coal in the national and European energy sector, 19-21 June 2017, Andrychów, Poland. Bristol : Institute of Physics, 2017, art. 012002 s. 1-16, bibliogr. 10 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 268 1757-8981)

283/525
Nr opisu: 0000120226   
An overview of potential benefits and limitations of Compressed Air Energy Storage in abandoned coal mines.
[Aut.]: Marcin Lutyński.
W: The role of Polish coal in the national and European energy sector, 19-21 June 2017, Andrychów, Poland. Bristol : Institute of Physics, 2017, art. 012006 s. 1-10, bibliogr. 18 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 268 1757-8981)

284/525
Nr opisu: 0000120905   
Analysis of availability of longwall-shearer based on its working cycle.
[Aut.]: Jarosław Brodny, Magdalena Tutak.
W: World Multidisciplinary Earth Sciences Symposium (WMESS 2017), 11-15 September 2017, Prague, Czech Republic (online). Bristol : Institute of Physics, 2017, (plik pdf) art. 042020 s. 1-7, bibliogr. 7 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 95 1755-1315)

285/525
Nr opisu: 0000118118   
Analysis of design characteristics of a V-type support using an advanced engineering environment.
[Aut.]: Aleksander Gwiazda, Wacław Banaś, Agnieszka Sękala, Grzegorz Ćwikła, Santina Topolska, Krzysztof Foit, Zbigniew Monica.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012053 s. 1-8, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

286/525
Nr opisu: 0000118164   
Analysis of features of stainless steels in dissimilar welded joints in chloride inducted corrosion.
[Aut.]: Santina Topolska, J. Łabanowski.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012130 s. 1-6, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

287/525
Nr opisu: 0000120906   
Analysis of influence of goaf sealing from tailgate on the methane concentration at the outlet from the longwall.
[Aut.]: Magdalena Tutak, Jarosław Brodny.
W: World Multidisciplinary Earth Sciences Symposium (WMESS 2017), 11-15 September 2017, Prague, Czech Republic (online). Bristol : Institute of Physics, 2017, (plik pdf) art. 042025 s. 1-8, bibliogr. 8 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 95 1755-1315)

288/525
Nr opisu: 0000118151   
Analysis of the possibility of SysML and BPMN application in formal data acquisition system description.
[Aut.]: Grzegorz Ćwikła, Aleksander Gwiazda, Wacław Banaś, Zbigniew Monica, Krzysztof Foit.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012034 s. 1-12, bibliogr. 33 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

289/525
Nr opisu: 0000120903   
Application of crushed concrete in geotechnical engineering - selected issues.
[Aut.]: Jacek Kawalec, Sławomir Kwiecień, A. Pilipenko, J. Rybak.
W: World Multidisciplinary Earth Sciences Symposium (WMESS 2017), 11-15 September 2017, Prague, Czech Republic (online). Bristol : Institute of Physics, 2017, (plik pdf) art. 022057 s. 1-10, bibliogr. 23 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 95 1755-1315)

290/525
Nr opisu: 0000120904   
Application of elements of TPM strategy for operation analysis of mining machine.
[Aut.]: Jarosław Brodny, Magdalena Tutak.
W: World Multidisciplinary Earth Sciences Symposium (WMESS 2017), 11-15 September 2017, Prague, Czech Republic (online). Bristol : Institute of Physics, 2017, (plik pdf) art. 042019 s. 1-7, bibliogr. 8 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 95 1755-1315)

strategia TPM ; model OEE ; maszyna górnicza

TPM strategy ; OEE model ; mining machine

291/525
Nr opisu: 0000119624   
Application of structure monitoring systems to the assessment of the behaviour of bridges in mining areas.
[Aut.]: B. Parkasiewicz, M. Kadela, Piotr Bętkowski, R. Sieńko, Ł. Bednarski.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 032018 s. 1-11, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

292/525
Nr opisu: 0000118117   
Application of the CBR method for aiding the process of manipulators designing.
[Aut.]: Piotr Ociepka, Krzysztof Herbuś.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012085 s. 1-8, bibliogr. 25 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

293/525
Nr opisu: 0000118950   
Axial pico turbine - construction and experimental research.
[Aut.]: Grzegorz Peczkis, Z. Goryca, Andrzej** Korczak.
W: XV International Scientific and Engineering Conference Hermetic Sealing, Vibration Reliability and Ecological Safety of Pump and Compressor Machinery HERVICON+PUMPS-2017. September 5-8, 2017, Sumy, Ukraine. Eds. Volodymyr Martsynkovskyy, Igor Tverdokhleb, Andriy Zahorulko, Serhii Hudkov. Bristol : Institute of Physics, 2017, art. 012016 s. 1-12, bibliogr. 4 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 233, iss. 1 1757-8981)

294/525
Nr opisu: 0000120910   
Behaviour of masonry walls under horizontal shear in mining areas.
[Aut.]: M. Kadela, Marek Bartoszek, J. Fedorowicz.
W: World Multidisciplinary Earth Sciences Symposium (WMESS 2017), 11-15 September 2017, Prague, Czech Republic (online). Bristol : Institute of Physics, 2017, (plik pdf) art. 022047 s. 1-11, bibliogr. 23 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 95 1755-1315)

295/525
Nr opisu: 0000118115   
Calculations of flexibility module in measurements instruments.
[Aut.]: Andrzej Wróbel, Marek Płaczek, Andrzej Baier.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012137 s. 1-8, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

296/525
Nr opisu: 0000120224   
Chances of coal in European power industry.
[Aut.]: Zygmunt Łukaszczyk, Henryk** Badura.
W: The role of Polish coal in the national and European energy sector, 19-21 June 2017, Andrychów, Poland. Bristol : Institute of Physics, 2017, art. 012004 s. 1-12, bibliogr. 25 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 268 1757-8981)

297/525
Nr opisu: 0000119640   
Change in stiffness of pavement layers in the linear discontinuous deformation area.
[Aut.]: Marcin Grygierek.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 042051 s. 1-8, bibliogr. 4 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

298/525
Nr opisu: 0000118473   
Comparison of single and consecutive dual frequency induction surface hardening of gear wheels.
[Aut.]: Jerzy Barglik, Kazimierz** Ducki, D. Kukla, J. Mizera, G. Mrówka-Nowotnik, J. Sieniawski, Albert Smalcerz.
W: Modelling for materials processing. Proceedings of the VIII International Scientific Colloquium, Riga, September 21-22, 2017. Ed. Andris Jakovics, Janis Virbulis. Riga : University of Latvia, 2017, s. 185-190, bibliogr. 2 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 355 1757-8981)

299/525
Nr opisu: 0000119637   
Control method stretches suspensions by measuring the sag of strands in cable-stayed bridges.
[Aut.]: Piotr Bętkowski.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 022037 s. 1-11, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

300/525
Nr opisu: 0000119657   
Correlations between climate change and the modern European construction.
[Aut.]: Anna Gumińska.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 062026 s. 1-10, bibliogr. 18 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

301/525
Nr opisu: 0000120229   
Costs assesment of aerological hazards prevention exemplified by a coal mine company.
[Aut.]: Dariusz Musioł.
W: The role of Polish coal in the national and European energy sector, 19-21 June 2017, Andrychów, Poland. Bristol : Institute of Physics, 2017, art. 012008 s. 1-12, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 268 1757-8981)

302/525
Nr opisu: 0000119619   
Cracking of beams strengthened with externally bonded SRP tapes.
[Aut.]: Rafał Krzywoń.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art 032095 s. 1-9, bibliogr. 14 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245, iss. 3 1757-8981)

303/525
Nr opisu: 0000118160   
Design of strength characteristics on the example of a mining support.
[Aut.]: Aleksander Gwiazda, Agnieszka Sękala, Wacław Banaś, Santina Topolska, Krzysztof Foit, Zbigniew Monica.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012054 s. 1-7, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

304/525
Nr opisu: 0000118153   
Designing of a technological line in the context of controlling with the use of integration of the virtual controller with the mechatronics concept designer module of the PLM Siemens NX software.
[Aut.]: Krzysztof Herbuś, Piotr Ociepka.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012057 s. 1-7, bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

305/525
Nr opisu: 0000120907   
Determination of particular endogenous fires hazard zones in goaf with caving of longwall.
[Aut.]: Magdalena Tutak, Jarosław Brodny.
W: World Multidisciplinary Earth Sciences Symposium (WMESS 2017), 11-15 September 2017, Prague, Czech Republic (online). Bristol : Institute of Physics, 2017, (plik pdf) art. 042026 s. 1-10, bibliogr. 16 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 95 1755-1315)

306/525
Nr opisu: 0000119642
Diagnosis of transformation in architecture and construction of the housing stock in the years 1848-2013 in selected cities of Upper Silesia.
[Aut.]: Jerzy Cibis, B. Nowogońska.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 052060 s. 1-11, bibliogr. 7 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

307/525
Nr opisu: 0000120231   
Disposal of coal combustion wastes in the hydraulic backfill process.
[Aut.]: Piotr Pierzyna.
W: The role of Polish coal in the national and European energy sector, 19-21 June 2017, Andrychów, Poland. Bristol : Institute of Physics, 2017, art. 012011 s. 1-10, bibliogr. 14 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 268 1757-8981)

308/525
Nr opisu: 0000116386   
Electrically conductive carbon fibre-reinforced composite for aircraft lightning strike protection.
[Aut.]: Andriy Katunin, Katarzyna Krukiewicz, Roman Turczyn, P. Sul, Marcin Bilewicz.
W: 7th International Conference on Key Engineering Materials. (ICKEM 2017) 11-13 March 2017, Penang, Malaysia. Bristol : Institute of Physics, 2017, s. 1-5, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 201 1757-8981)

309/525
Nr opisu: 0000118136   
Experimental analysis of hydraulic discharge line in the frequency domain.
[Aut.]: Klaudiusz Klarecki, Dominik Rabsztyn, Mariusz Hetmańczyk.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012072 s. 1-12, bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

310/525
Nr opisu: 0000118159   
Experimental analysis of hydraulic discharge line in the time domain.
[Aut.]: Klaudiusz Klarecki, Dominik Rabsztyn, Mariusz Hetmańczyk.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012073 s. 1-9, bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

311/525
Nr opisu: 0000118110   
Experimental determination of dynamic parameters of an industrial robot.
[Aut.]: Wacław Banaś, Grzegorz Ćwikła, Krzysztof Foit, Aleksander Gwiazda, Zbigniew Monica, Agnieszka Sękala.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012012 s. 1-8, bibliogr. 17 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

312/525
Nr opisu: 0000119627   
Experimental verification of same simple equilibrium models of masonry shear walls.
[Aut.]: Radosław Jasiński.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 032044 s. 1-10, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

konstrukcja murowa ; ściana ścinana ; model prętowy typu ST

masonry structure ; shear wall ; strut-tie model

313/525
Nr opisu: 0000120909   
Forecasting of energy expenditure of induced seismicity with use of artificial neural network.
[Aut.]: Tomasz* Cichy, Piotr Bańka.
W: World Multidisciplinary Earth Sciences Symposium (WMESS 2017), 11-15 September 2017, Prague, Czech Republic (online). Bristol : Institute of Physics, 2017, (plik pdf) art. 042058 s. 1-7, bibliogr. 8 poz. (IOP Conference Series ; Earth and Environmental Science ; vol. 95 1755-1315)

314/525
Nr opisu: 0000120240   
Forecasts of methane concentration at the outlet of the longwall with caving area - case study.
[Aut.]: Henryk** Badura, Piotr Bańka, Dariusz Musioł, Marek Wesołowski.
W: The role of Polish coal in the national and European energy sector, 19-21 June 2017, Andrychów, Poland. Bristol : Institute of Physics, 2017, art. 012016 s. 1-18, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 268 1757-8981)

315/525
Nr opisu: 0000120237   
Hazards and occupational risk in hard coal mines - a critical analysis of legal requirements.
[Aut.]: Marcin Krause.
W: The role of Polish coal in the national and European energy sector, 19-21 June 2017, Andrychów, Poland. Bristol : Institute of Physics, 2017, art. 012013 s. 1-9, bibliogr. 30 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 268 1757-8981)

316/525
Nr opisu: 0000119651   
How to design buildings, housing estates and towns so that their impact on the environment will be acceptable?.
[Aut.]: Beata Majerska-Pałubicka.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 052022 s. 1-10, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

317/525
Nr opisu: 0000118150   
Hydraulic elements in reduction of vibrations in mechanical systems.
[Aut.]: Katarzyna Białas, Andrzej Buchacz.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012017 s. 1-6, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

318/525
Nr opisu: 0000119628   
Identification of the parameters of Menétrey-Willam failure surface of calcium silicate units.
[Aut.]: Radosław Jasiński.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 032045 s. 1-11, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

element murowy ; trójosiowy stan naprężenia ; powierzchnia zniszczenia Menetrey-Willama

masonry unit ; triaxial stress state ; Menetrey-Willam failure surface

319/525
Nr opisu: 0000120223   
Importance of hard coal in electricity generation in Poland.
[Aut.]: Franciszek Plewa, Grzegorz Strozik.
W: The role of Polish coal in the national and European energy sector, 19-21 June 2017, Andrychów, Poland. Bristol : Institute of Physics, 2017, art. 012001 s. 1-16, bibliogr. 23 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 268 1757-8981)

320/525
Nr opisu: 0000119638   
Inclined buildings - some reasons and solutions.
[Aut.]: Małgorzata Kijanka, Magdalena Kowalska.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 022052 s. 1-12, bibliogr. 36 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

niestateczność ; stabilizacja ; prostowanie budynku ; szkody górnicze ; osiadanie

leaning instability ; stabilization ; straightening of building ; mining damage ; subsidence

321/525
Nr opisu: 0000120242   
Influence of cements containing calcareous fly ash as a main component properties of fresh cement mixtures.
[Aut.]: Jacek Gołaszewski, Aleksandra Kostrzanowska-Siedlarz, Tomasz Ponikiewski, Patrycja Miera.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 022099, s. 1-11, bibliogr. 24 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245, iss. 2 1757-8981)

322/525
Nr opisu: 0000119630   
Influence of curing conditions on long-term compressive strength of mortars with accelerating admixtures.
[Aut.]: Jan Pizoń, Beata Łaźniewska-Piekarczyk.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 032093 s. 1-9, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

323/525
Nr opisu: 0000119626   
Influence of grid reinforcement placed in masonry bed joints on its flexural strength.
[Aut.]: Adam Piekarczyk.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 032085 s. 1-10, bibliogr. 5 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

324/525
Nr opisu: 0000118155   
Manipulation and handling processes off-line programming and optimization with use of K-Roset.
[Aut.]: Grzegorz Gołda, Adrian Kampa.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012150 s. 1-6, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

325/525
Nr opisu: 0000118163   
Mechanical characteristics of welded joints between different stainless steels grades.
[Aut.]: Santina Topolska, J. Łabanowski.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012131 s. 1-6, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

326/525
Nr opisu: 0000119649   
Mechanical parameters of rubber-sand mixtures for numerical analysis of a road embankment.
[Aut.]: Magdalena Kowalska, M. Chmielewski.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 052003 s. 1-9, bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

piasek ; granulat gumowy ; zużyte opony ; aparat bezpośredniego ścinania

sand ; rubber granulate ; scrap tires ; direct shear apparatus

327/525
Nr opisu: 0000116375   
Mechanical properties and structure of AZ61 magnesium alloy processed by equal channel angular pressing.
[Aut.]: O. Hilser, S. Rusz, Tomasz Tański, Przemysław Snopiński, J. Dzugan, M. Kraus.
W: 4th International Conference Recent Trends in Structural Materials. Pilsen, Czech Republic, 9-11 November 2016. Bristol : Institute of Physics, 2017, art. no. 012028, s. 1-8, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 179 1757-8981)

328/525
Nr opisu: 0000119634   
Methods of removing buildings deflection used in Poland.
[Aut.]: Krzysztof Gromysz.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 032096 s. 1-11, bibliogr. 6 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

329/525
Nr opisu: 0000115976   
Micromagnetic investigation of low-symmetry 3D particles.
[Aut.]: Tomasz Błachowicz, A. Ehrmann.
W: 4th International Conference on Competitive Materials and Technology Processes. IC-CMTP4, Miskolc, Hungary, 3-7 October 2016. Ed. L. A. Gomze. Bristol : Institute of Physics, 2017, art no. 012057, s. 1-5, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 175 1757-8981)

330/525
Nr opisu: 0000120216   
Mining machines effectiveness and OEE Indicator.
[Aut.]: J. Korski, Katarzyna Tobór-Osadnik, Małgorzata Wyganowska.
W: The role of Polish coal in the national and European energy sector, 19-21 June 2017, Andrychów, Poland. Bristol : Institute of Physics, 2017, art. 012010 s. 1-12, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 268 1757-8981)

331/525
Nr opisu: 0000118154   
Modal analysis in relation to the casing of an electric power steering system.
[Aut.]: Andrzej Baier, Krzysztof Herbuś, Piotr Ociepka, Marek Płaczek.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012010 s. 1-8, bibliogr. 28 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

332/525
Nr opisu: 0000121278   
Modeling a hierarchical structure of factors influencing exploitation policy for water distribution systems using ISM approach.
[Aut.]: M. Jasiulewicz-Kaczmarek, Ryszard Wyczółkowski, V. Gładysiak.
W: 2017 International Conference on Material Engineering and Advanced Manufacturing Technology, 25-27 August 2017, Busan, Korea. Bristol : Institute of Physics, 2017, art. 012014 s. 1-12, bibliogr. 18 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 282 1757-8981)

333/525
Nr opisu: 0000118127   
Modeling of a production system using the multi-agent approach.
[Aut.]: Aleksander Gwiazda, Agnieszka Sękala, Wacław Banaś.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012052 s. 1-6, bibliogr. 25 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

334/525
Nr opisu: 0000118120   
Modelling and simulation of a robotic work cell.
[Aut.]: Agnieszka Sękala, Aleksander Gwiazda, Gabriel Kost, Wacław Banaś.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012116 s. 1-7, bibiogr. 30 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

335/525
Nr opisu: 0000118126   
Modelling cooperation of industrial robots as multi-agent systems.
[Aut.]: Przemysław Hryniewicz, Wacław Banaś, Krzysztof Foit, Aleksander Gwiazda, Agnieszka Sękala.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012061 s. 1-6, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

336/525
Nr opisu: 0000118472   
Modelling for materials processing. Proceedings of the VIII International Scientific Colloquium, Riga, September 21-22, 2017. Ed. Andris Jakovics, Janis Virbulis.
Riga : University of Latvia, 2017, 310 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 355 1757-8981)
Publikacja nie należy do bibliografii Uczelni

337/525
Nr opisu: 0000118114   
Modelling of a mecanum wheel taking into account the geometry of road rollers.
[Aut.]: Przemysław Hryniewicz, Aleksander Gwiazda, Wacław Banaś, Agnieszka Sękala, Krzysztof Foit.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012060 s. 1-6, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

338/525
Nr opisu: 0000118149   
Modelling of industrial robot in LabView Robotics.
[Aut.]: Wacław Banaś, Grzegorz Ćwikła, Krzysztof Foit, Aleksander Gwiazda, Zbigniew Monica, Agnieszka Sękala.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012011 s. 1-7, bibliogr. 27 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

339/525
Nr opisu: 0000118109   
Modelling of teeth of a gear transmission for modern manufacturing technologies.
[Aut.]: Zbigniew Monica, Wacław Banaś, Grzegorz Ćwikła, Santina Topolska.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012080 s. 1-6, bibliogr. 7 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

340/525
Nr opisu: 0000119645   
Models for experimental high density housing.
[Aut.]: Tomasz Bradecki, Julia Swoboda, Katarzyna Nowak, Klaudia Dziechciarz.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 052025 s. 1-10, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

341/525
Nr opisu: 0000118099
Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania.
Bristol : Institute of Physics, 2017, 980 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)
Publikacja nie należy do bibliografii Uczelni

342/525
Nr opisu: 0000118128   
Molding of strength testing samples using modern PDCPD material for purpose of automotive industry.
[Aut.]: Łukasz Grabowski, Andrzej Baier, Michał Sobek.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012051 s. 1-7, bibliogr. 9 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

343/525
Nr opisu: 0000120238   
Motivation and proposal of important categories of the work of mine rescuer.
[Aut.]: Aneta Grodzicka, Jan* Szlązak, P. Buchwald.
W: The role of Polish coal in the national and European energy sector, 19-21 June 2017, Andrychów, Poland. Bristol : Institute of Physics, 2017, art. 012014 s. 1-12, bibliogr. 3 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 268 1757-8981)

344/525
Nr opisu: 0000118165   
New method of processing heat treatment experiments with numerical simulation support.
[Aut.]: Tomasz Kik, J. Moravec, I. Novakova.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012069 s. 1-11, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

345/525
Nr opisu: 0000119631   
Plasticizer and superplasticizer compatibility with cement with synthetic and natural air-entraining admixtures.
[Aut.]: Beata Łaźniewska-Piekarczyk, Patrycja Miera, Janusz** Szwabowski.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 032094 s. 1-9, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245, iss. 3 1757-8981)

346/525
Nr opisu: 0000120230   
Possibility of reducing costs of mining operations - economic aspects of workplace accidents.
[Aut.]: Adam Duda.
W: The role of Polish coal in the national and European energy sector, 19-21 June 2017, Andrychów, Poland. Bristol : Institute of Physics, 2017, art. 012009 s. 1-8, bibliogr. 7 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 268 1757-8981)

347/525
Nr opisu: 0000118096   
Practical example of game theory application for production route selection.
[Aut.]: Małgorzata Olender, Damian Krenczyk.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012087 s. 1-7, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

348/525
Nr opisu: 0000119632   
Prefabricated RM facade panels - search for the safe solution.
[Aut.]: Jacek Hulimka, Jan Kubica, Marta Kałuża, Iwona Galman.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 032080 s. 1-11, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

349/525
Nr opisu: 0000119398   
Preliminary investigation of fabrication composite structures by using shape memory alloys.
[Aut.]: Wojciech Klein, Olaf* Dudek.
W: 2017 International Conference on Materials and Intelligent Manufacturing. (ICMIM 2017) 21-23 August 2017, National University of Singapore (NUS), Singapore. Bristol : Institute of Physics, 2017, art. 012011 s. 1-7, bibliogr. 10 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 244 1757-8981)

350/525
Nr opisu: 0000118121   
Remote control of the industry processes. POWERLINK protocol application.
[Aut.]: Andrzej Wróbel, Dawid Paruzel, Bartosz Paszkiewicz.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012136 s. 1-7, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

351/525
Nr opisu: 0000119639   
Repair and protection of small railway viaduct with jammed span at the mining influence.
[Aut.]: Piotr Bętkowski.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 022038 s. 1-11, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

352/525
Nr opisu: 0000118124   
Repair welding of cast iron coated electrodes.
[Aut.]: Marcin Żuk, Jacek Górka, Rafał Dojka, Artur Czupryński.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012139 s. 1-7, biliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

353/525
Nr opisu: 0000120464   
Searching for innovations and methods of using the cultural heritage on the example of Upper Silesia.
[Aut.]: Tomasz Wagner.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 042088 s. 1-14, bibliogr. 22 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

354/525
Nr opisu: 0000119636   
Soil overconsolidation changes caused by dynamic replacement.
[Aut.]: P. Kanty, Sławomir Kwiecień, Jerzy** Sękowski.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 022062 s. 1-11, bibliogr. 17 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

355/525
Nr opisu: 0000118959   
Static calculation of the rotor unloading automatic machine for a high-pressure centrifugal pump.
[Aut.]: V. Martsynkovskyy, A. Deineka, Andrzej** Korczak, Grzegorz Peczkis.
W: XV International Scientific and Engineering Conference Hermetic Sealing, Vibration Reliability and Ecological Safety of Pump and Compressor Machinery HERVICON+PUMPS-2017. September 5-8, 2017, Sumy, Ukraine. Eds. Volodymyr Martsynkovskyy, Igor Tverdokhleb, Andriy Zahorulko, Serhii Hudkov. Bristol : Institute of Physics, 2017, art. 012056 s. 1-12, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 233 1757-8981)

356/525
Nr opisu: 0000119654   
Structural sustainability - heuristic approach.
[Aut.]: Krzysztof Marek Rostański.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 052007 s. 1-10, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

357/525
Nr opisu: 0000120239   
Study of the 'lifeline' as the measure allowing for safe selfrescue of miners in conditions of lack of visibility caused by underground fire.
[Aut.]: Henryk** Badura, Aneta Grodzicka, Dariusz Musioł.
W: The role of Polish coal in the national and European energy sector, 19-21 June 2017, Andrychów, Poland. Bristol : Institute of Physics, 2017, art. 012015 s. 1-14, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 268 1757-8981)

358/525
Nr opisu: 0000115702   
Surface treatment and corrosion behaviour of austenitic stainless steel biomaterial.
[Aut.]: M. Oravcova, P. Palcek, V. Zatkalikova, Tomasz Tański, Mariusz Król.
W: 4th International Conference on Competitive Materials and Technology Processes. IC-CMTP4, Miskolc, Hungary, 3-7 October 2016. Ed. L. A. Gomze. Bristol : Institute of Physics, 2017, s. 1-7, bibliogr. 10 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 175 1757-8981)

359/525
Nr opisu: 0000119658   
Sustainability trends reflected in the architecture of the European examples.
[Aut.]: Anna Gumińska.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 062027 s. 1-10, bibliogr. 21 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

360/525
Nr opisu: 0000119641   
Technical problems of residential construction.
[Aut.]: B. Nowogońska, Jerzy Cibis.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 052042 s. 1-6, bibliogr. 10 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

361/525
Nr opisu: 0000118156   
Testing designing an electrical device compliant with the electromagnetic compatibility directive.
[Aut.]: Marek Płaczek, Michał Maćkowski, Paweł Rafał Nowak.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012096 s. 1-12, bibliogr. 35 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

362/525
Nr opisu: 0000118112   
The algorithm of verification of welding process for plastic pipes.
[Aut.]: Rafał Rząsiński.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012113 s. 1-6, bibliogr. 5 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

363/525
Nr opisu: 0000118166   
The analysis of energy consumption of the transport and manipulation process of Fanuc AM100iB robot.
[Aut.]: Adam Cholewa, Jerzy Świder, A. Zbilski.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012024 s. 1-6, bibliogr. 5 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

364/525
Nr opisu: 0000118125   
The comparison of the use of holonic and agent-based methods in modelling of manufacturing systems.
[Aut.]: Krzysztof Foit, Wacław Banaś, Aleksander Gwiazda, Przemysław Hryniewicz.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012046 s. 1-8, bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

365/525
Nr opisu: 0000120232   
The impact of changes in the rheological parameters of fine-grained hydromixtures on the efficiency of a selected industrial gravitational hydraulic transport system.
[Aut.]: Marcin Popczyk.
W: The role of Polish coal in the national and European energy sector, 19-21 June 2017, Andrychów, Poland. Bristol : Institute of Physics, 2017, art. 012012 s. 1-10, bibliogr. 7 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 268 1757-8981)

366/525
Nr opisu: 0000118158   
The impact of various distance between axes of worm gear on torque value. Worm gear test stand.
[Aut.]: Michał Sobek, Andrzej Baier, Łukasz Grabowski.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012118 s. 1-6, bibliogr. 10 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

367/525
Nr opisu: 0000118152   
The influence of computer-generated path on the robot's effector stability of motion.
[Aut.]: Krzysztof Foit, Wacław Banaś, Aleksander Gwiazda, Grzegorz Ćwikła.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012045 s. 1-9, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

368/525
Nr opisu: 0000118157   
The influence of printing parameters on selected mechanical properties of FDM/FFF 3D-printed parts.
[Aut.]: Grzegorz Ćwikła, Cezary Grabowik, Krzysztof Kalinowski, Iwona Paprocka, Piotr Ociepka.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012033 s. 1-10, bibliogr. 17 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

369/525
Nr opisu: 0000120225   
The possibility of increasing the efficiency of accessible coal deposits by optimizing dimensions of protective pillars or the scope of exploitation.
[Aut.]: Piotr Bańka, Henryk** Badura, Marek Wesołowski.
W: The role of Polish coal in the national and European energy sector, 19-21 June 2017, Andrychów, Poland. Bristol : Institute of Physics, 2017, art. 012005 s. 1-10, bibliogr. 5 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 268 1757-8981)

370/525
Nr opisu: 0000118161   
The production route selection algorithm in virtual manufacturing networks.
[Aut.]: Damian Krenczyk, Bożena Skołud, Małgorzata Olender.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012074 s. 1-8, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

371/525
Nr opisu: 0000118111   
The project of automatic feeder of sheet for press.
[Aut.]: Rafał Rząsiński.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012114 s. 1-6, bibliogr. 6 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

372/525
Nr opisu: 0000120214   
The role of Polish coal in the national and European energy sector, 19-21 June 2017, Andrychów, Poland.
Bristol : Institute of Physics, 2017, 240 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 268 1757-8981)
Publikacja nie należy do bibliografii Uczelni

373/525
Nr opisu: 0000118122   
Verification of operation of the actuator control system using the integration the B&R Automation Studio software with a virtual model of the actuator system.
[Aut.]: Krzysztof Herbuś, Piotr Ociepka.
W: Modern technologies in industrial engineering V. ModTech 2017 International Conference, 14-17 June 2017, Sibiu, Romania. Bristol : Institute of Physics, 2017, art. 012056 s. 1-8, bibliogr. 26 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 227 1757-8981)

374/525
Nr opisu: 0000119646
Work models in the design process for house interior and exterior: physical or virtual?.
[Aut.]: Tomasz Bradecki, B. Uherek-Bradecka.
W: World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini. Bristol : Institute of Physics, 2017, art. 052033 s. 1-9, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)

375/525
Nr opisu: 0000119614
World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2017, 12-16 June 2017, Prague, Czech Republic. Eds. Marian Drusa, Isik Yilmaz, Marian Marschalko, Eva Coisson, Jaroslaw Rybak, Andrea Segalini.
Bristol : Institute of Physics, 2017, 2520 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 245 1757-8981)
Publikacja nie należy do bibliografii Uczelni

376/525
Nr opisu: 0000120902   
World Multidisciplinary Earth Sciences Symposium (WMESS 2017), 11-15 September 2017, Prague, Czech Republic (online).
Bristol : Institute of Physics, 2017, (plik pdf) 2070 s.
(IOP Conference Series ; Earth and Environmental Science ; vol. 95 1755-1315)
Publikacja nie należy do bibliografii Uczelni

377/525
Nr opisu: 0000118955
XV International Scientific and Engineering Conference Hermetic Sealing, Vibration Reliability and Ecological Safety of Pump and Compressor Machinery HERVICON+PUMPS-2017. September 5-8, 2017, Sumy, Ukraine. Eds. Volodymyr Martsynkovskyy, Igor Tverdokhleb, Andriy Zahorulko, Serhii Hudkov.
Bristol : Institute of Physics, 2017, 580 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 233, iss. 1 1757-8981)
Publikacja nie należy do bibliografii Uczelni

378/525
Nr opisu: 0000111984   
20th Innovative manufacturing engineering and energy international conference. IManEE 2016, September 23-25, 2016, Kallithea Chalkidiki, Greece. Eds.: Stergios Maropoulos, Panagiotis Kyratsis, Konstantinos Kakoulis, Nikolaos Taousanidis, Gheorghe Oancea, Oana Dodun.
Bristol : Institute of Physics, 2016, 850 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 161 1757-8981)
Publikacja nie należy do bibliografii Uczelni

379/525
Nr opisu: 0000112888   
A concept of technology for freight wagons modernization.
[Aut.]: Marek Płaczek, Andrzej Wróbel, Andrzej Buchacz.
W: 20th Innovative manufacturing engineering and energy international conference. IManEE 2016, September 23-25, 2016, Kallithea Chalkidiki, Greece. Eds.: Stergios Maropoulos, Panagiotis Kyratsis, Konstantinos Kakoulis, Nikolaos Taousanidis, Gheorghe Oancea, Oana Dodun. Bristol : Institute of Physics, 2016, s. 1-12, bibliogr. 50 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 161 1757-8981)

380/525
Nr opisu: 0000110065   
A multi-agent approach to the simulation of robotized manufacturing systems.
[Aut.]: Krzysztof Foit, Aleksander Gwiazda, Wacław Banaś.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 739-744, bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

381/525
Nr opisu: 0000110117   
An analysis of the possibility of Macro Fiber Composite transducers application in modernized freight wagon.
[Aut.]: Marek Płaczek, Andrzej Wróbel, Andrzej Buchacz.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 959-964, bibliogr. 24 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

382/525
Nr opisu: 0000110071   
Analysis of the position of robotic cell components and its impact on energy consumption by robot.
[Aut.]: Wacław Banaś, Aleksander Gwiazda, Zbigniew Monica, Agnieszka Sękala, Krzysztof Foit.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 777-782, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

383/525
Nr opisu: 0000112161   
Analysis of thermal stress of the piston during non-stationary heat flow in a turbocharged Diesel engine.
[Aut.]: Piotr Gustof, Aleksander* Hornik.
W: Scientific Conference on Automotive Vehicles and Combustion Engines. (KONMOT 2016), 22-23 September 2016, Krakow, Poland. Eds.: Marek Brzezanski, Wladyslaw Mitianiec. Bristol : Institute of Physics, 2016, s. 1-9, bibliogr. 15 poz. (IOP Conference Series ; vol. 148 Materials Science and Engineering ; 1757-8981)

384/525
Nr opisu: 0000110085   
Application of case-based reasoning for machining parameters selection.
[Aut.]: Cezary Grabowik, Krzysztof Kalinowski, Damian Krenczyk, Iwona Paprocka, Wojciech Kempa.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 460-467, bibliogr. 17 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

385/525
Nr opisu: 0000110064   
Application of the advanced engineering environment for optimization energy consumption in designed vehicles.
[Aut.]: Zbigniew Monica, Agnieszka Sękala, Aleksander Gwiazda, Wacław Banaś.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 661-666, bibliogr. 24 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

386/525
Nr opisu: 0000110076   
Application of the CBR method for adding the process of cutting tools and parameters selection.
[Aut.]: Piotr Ociepka, Krzysztof Herbuś.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 216-223, bibliogr. 23 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

387/525
Nr opisu: 0000110079   
Application of the CBR method for adding the technological process designing.
[Aut.]: Piotr Ociepka, Krzysztof Herbuś.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 224-231, bibliogr. 25 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

388/525
Nr opisu: 0000110075   
Composite materials molding simulation for purpose of automotive industry.
[Aut.]: Łukasz Grabowski, Andrzej Baier, M. Majzner, Michał Sobek.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 160-169, bibliogr. 9 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

389/525
Nr opisu: 0000110101   
Conception of the system for traffic measurements based on piezoelectric foils.
[Aut.]: Marek Płaczek.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 576-582, bibliogr. 41 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

390/525
Nr opisu: 0000110116   
Determining of a robot workspace using the integration of a CAD system with a virtual control system.
[Aut.]: Krzysztof Herbuś, Piotr Ociepka.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 731-738, bibliogr. 22 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

391/525
Nr opisu: 0000110082   
Fatigue test of a fiberglass based composite panel. Increasing the lifetime of freight wagon.
[Aut.]: Michał Sobek, Andrzej Baier, Łukasz Grabowski, M. Majzner.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 357-362, bibliogr. 14 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

392/525
Nr opisu: 0000110080   
Hardness analysis of welded joints of austenitic and duplex stainless steels.
[Aut.]: Santina Topolska.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 272-277, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

393/525
Nr opisu: 0000110110   
Implementation of object-oriented programming in study of electrical race car.
[Aut.]: M. Nowak, Maja* Baier.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 603-609, bibliogr. 7 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

394/525
Nr opisu: 0000110072   
Integration of scheduling and discrete event simulation systems to improve production flow planning.
[Aut.]: Damian Krenczyk, Iwona Paprocka, Wojciech Kempa, Cezary Grabowik, Krzysztof Kalinowski.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 127-132, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

395/525
Nr opisu: 0000110096   
Integration of the virtual model of a Stewart platform with the avatar of a vehicle in a virtual reality.
[Aut.]: Krzysztof Herbuś, Piotr Ociepka.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 519-524, bibliogr. 22 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

396/525
Nr opisu: 0000110135   
Investigation of corrosion of welded joints of austenitic and duplex stainless steels.
[Aut.]: Santina Topolska.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 972-977, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

397/525
Nr opisu: 0000110062   
IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu.
Bristol : Institute of Physics, 2016, 1171 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

398/525
Nr opisu: 0000110061   
Modeling of a V-type mining support in an advanced engineering environment.
[Aut.]: Aleksander Gwiazda, Wacław Banaś, Krzysztof Foit, Santina Topolska, Zbigniew Monica, Agnieszka Sękala.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 414-419, bibliogr. 26 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

399/525
Nr opisu: 0000110069   
Modelling and simulation tooling controlled by the PLC in the robot cell in NX.
[Aut.]: Wacław Banaś, Aleksander Gwiazda, Zbigniew Monica, Agnieszka Sękala, Krzysztof Foit.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 771-776, bibliogr. 17 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

400/525
Nr opisu: 0000110067   
Modelling of robotic work cells using agent based-approach.
[Aut.]: Agnieszka Sękala, Wacław Banaś, Aleksander Gwiazda, Zbigniew Monica, Gabriel Kost, Przemysław Hryniewicz.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 751-756, bibliogr. 26 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

401/525
Nr opisu: 0000110066   
Modelling of robotized manufacturing systems using multi-agent formalism.
[Aut.]: Krzysztof Foit, Aleksander Gwiazda, Wacław Banaś.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 745-750, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

402/525
Nr opisu: 0000110107   
Modelling of series of types of automated trenchless works tunneling.
[Aut.]: Piotr Gendarz, Rafał Rząsiński.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 621-629, bibliogr. 6 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

403/525
Nr opisu: 0000110073   
Multi-criteria evaluation methods in the production scheduling.
[Aut.]: Krzysztof Kalinowski, Damian Krenczyk, Iwona Paprocka, Wojciech Kempa, Cezary Grabowik.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 133-138, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

404/525
Nr opisu: 0000110099   
Non-classical method of modelling of vibrating mechatronic systems.
[Aut.]: Katarzyna Białas, Andrzej Buchacz.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 533-539, bibliogr. 7 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

405/525
Nr opisu: 0000110113   
Numerical model of Fanuc AM100iB robot.
[Aut.]: Adam Cholewa, Jerzy Świder, A. Zbilski.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 673-678, bibliogr. 6 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

406/525
Nr opisu: 0000112885   
Optimization of the materials distribution in composite systems.
[Aut.]: Arkadiusz Poteralski, Mirosław Szczepanik.
W: 20th Innovative manufacturing engineering and energy international conference. IManEE 2016, September 23-25, 2016, Kallithea Chalkidiki, Greece. Eds.: Stergios Maropoulos, Panagiotis Kyratsis, Konstantinos Kakoulis, Nikolaos Taousanidis, Gheorghe Oancea, Oana Dodun. Bristol : Institute of Physics, 2016, s. 1-10, bibliogr. 19 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 161 1757-8981)

407/525
Nr opisu: 0000112881   
Optimization of the shell compliance by the thickness changing using PSO.
[Aut.]: Mirosław Szczepanik, Arkadiusz Poteralski, M. Kalinowski.
W: 20th Innovative manufacturing engineering and energy international conference. IManEE 2016, September 23-25, 2016, Kallithea Chalkidiki, Greece. Eds.: Stergios Maropoulos, Panagiotis Kyratsis, Konstantinos Kakoulis, Nikolaos Taousanidis, Gheorghe Oancea, Oana Dodun. Bristol : Institute of Physics, 2016, s. 1-10, bibliogr. 19 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 161 1757-8981)

408/525
Nr opisu: 0000110063   
Optimizing a four-props support using the integrative design approach.
[Aut.]: Aleksander Gwiazda, Krzysztof Foit, Wacław Banaś, Agnieszka Sękala, Zbigniew Monica, Santina Topolska.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 420-425, bibliogr. 33 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

409/525
Nr opisu: 0000110077   
Practical application of game theory based production flow planning method in virtual manufacturing networks.
[Aut.]: Małgorzata Olender, Damian Krenczyk.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 232-238, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

410/525
Nr opisu: 0000110114   
Realization of station for testing asynchronous three-phase motors.
[Aut.]: Andrzej Wróbel, W. Surma.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 689-694, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

411/525
Nr opisu: 0000112162   
Scientific Conference on Automotive Vehicles and Combustion Engines. (KONMOT 2016), 22-23 September 2016, Krakow, Poland. Eds.: Marek Brzezanski, Wladyslaw Mitianiec.
Bristol : Institute of Physics, 2016, 378 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 148 1757-8981)
Publikacja nie należy do bibliografii Uczelni

412/525
Nr opisu: 0000111986   
Selection of active elements in system reduction of vibration.
[Aut.]: Katarzyna Białas.
W: 20th Innovative manufacturing engineering and energy international conference. IManEE 2016, September 23-25, 2016, Kallithea Chalkidiki, Greece. Eds.: Stergios Maropoulos, Panagiotis Kyratsis, Konstantinos Kakoulis, Nikolaos Taousanidis, Gheorghe Oancea, Oana Dodun. Bristol : Institute of Physics, 2016, s. 1-6, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 161 1757-8981)

413/525
Nr opisu: 0000110100   
Semi-automatic simulation model generation of virtual dynamic networks for production flow planning.
[Aut.]: Damian Krenczyk, Bożena Skołud, Małgorzata Olender.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 540-546, bibliogr. 19 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

414/525
Nr opisu: 0000110084   
Simulation of stress in an innovative combination of composite with metal sheet.
[Aut.]: Andrzej Wróbel, Marek Płaczek, Andrzej Buchacz, A. Słomiany.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 452-459, bibliogr. 17 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

415/525
Nr opisu: 0000112883   
Stiffness selection in synthesis of mechatronic discrete systems.
[Aut.]: Andrzej Buchacz, D. Gałęziowski.
W: 20th Innovative manufacturing engineering and energy international conference. IManEE 2016, September 23-25, 2016, Kallithea Chalkidiki, Greece. Eds.: Stergios Maropoulos, Panagiotis Kyratsis, Konstantinos Kakoulis, Nikolaos Taousanidis, Gheorghe Oancea, Oana Dodun. Bristol : Institute of Physics, 2016, s. 1-7, bibliogr. 7 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 161 1757-8981)

416/525
Nr opisu: 0000112887   
Support system for generating statistics of existing railway rolling stock.
[Aut.]: Andrzej Wróbel, Marek Płaczek, Andrzej Buchacz.
W: 20th Innovative manufacturing engineering and energy international conference. IManEE 2016, September 23-25, 2016, Kallithea Chalkidiki, Greece. Eds.: Stergios Maropoulos, Panagiotis Kyratsis, Konstantinos Kakoulis, Nikolaos Taousanidis, Gheorghe Oancea, Oana Dodun. Bristol : Institute of Physics, 2016, s. 1-6, bibliogr. 17 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 161 1757-8981)

417/525
Nr opisu: 0000110104   
Testing and analysis of a modernized freight wagon's elements flammability.
[Aut.]: Marek Płaczek, Andrzej Wróbel, Andrzej Baier.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 583-592, bibliogr. 31 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

418/525
Nr opisu: 0000112884   
The application of artificial intelligence in the optimal design of mechanical systems.
[Aut.]: Arkadiusz Poteralski, M. Szczepanik.
W: 20th Innovative manufacturing engineering and energy international conference. IManEE 2016, September 23-25, 2016, Kallithea Chalkidiki, Greece. Eds.: Stergios Maropoulos, Panagiotis Kyratsis, Konstantinos Kakoulis, Nikolaos Taousanidis, Gheorghe Oancea, Oana Dodun. Bristol : Institute of Physics, 2016, s. 1-11, bibliogr. 17 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 161 1757-8981)

419/525
Nr opisu: 0000110087   
The application of virtual reality systems as a support of digital manufacturing and logistics.
[Aut.]: Grzegorz Gołda, Adrian Kampa, Iwona Paprocka.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 513-518, bibliogr. 10 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

420/525
Nr opisu: 0000110098   
The comparison of predictive scheduling algorithms for different sizes of job shop scheduling problems.
[Aut.]: Iwona Paprocka, Wojciech Kempa, Cezary Grabowik, Krzysztof Kalinowski, Damian Krenczyk.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 525-532, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

421/525
Nr opisu: 0000112167   
The impact of air-fuel mixture composition on SI engine performance during natural gas and producer gas combustion.
[Aut.]: Grzegorz Przybyła, Stefan** Postrzednik, Zbigniew Żmudka.
W: Scientific Conference on Automotive Vehicles and Combustion Engines. (KONMOT 2016), 22-23 September 2016, Krakow, Poland. Eds.: Marek Brzezanski, Wladyslaw Mitianiec. Bristol : Institute of Physics, 2016, s. 1-10, bibliogr. 17 poz. (IOP Conference Series ; vol. 148 Materials Science and Engineering ; 1757-8981)

422/525
Nr opisu: 0000112886   
The optimal design support system for shell components of vehicles using the methods of artificial intelligence.
[Aut.]: Mirosław Szczepanik, Arkadiusz Poteralski.
W: 20th Innovative manufacturing engineering and energy international conference. IManEE 2016, September 23-25, 2016, Kallithea Chalkidiki, Greece. Eds.: Stergios Maropoulos, Panagiotis Kyratsis, Konstantinos Kakoulis, Nikolaos Taousanidis, Gheorghe Oancea, Oana Dodun. Bristol : Institute of Physics, 2016, s. 1-8, bibliogr. 19 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 161 1757-8981)

423/525
Nr opisu: 0000110081   
The study of fix composite panel and steel plates on testing stand.
[Aut.]: Andrzej Wróbel, Marek Płaczek, M. Wachna.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 300-307, bibliogr. 22 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

424/525
Nr opisu: 0000112165   
The use of gaseous fuels mixtures for SI engines propulsion.
[Aut.]: Marek** Flekiewicz, Grzegorz Kubica.
W: Scientific Conference on Automotive Vehicles and Combustion Engines. (KONMOT 2016), 22-23 September 2016, Krakow, Poland. Eds.: Marek Brzezanski, Wladyslaw Mitianiec. Bristol : Institute of Physics, 2016, s. 1-10, bibliogr. 11 poz. (IOP Conference Series ; vol. 148 Materials Science and Engineering ; 1757-8981)

425/525
Nr opisu: 0000110112   
Verification of forward kinematics of the numerical and analytical model of Fanuc AM100iB robot.
[Aut.]: Adam Cholewa, Jerzy Świder, A. Zbilski.
W: IV International Conference on Modern Technologies in Industrial Engineering (ModTech 2016), Iasi, Romania, 15-18 June 2016. Eds.: Viorel Cohal, Lucian Lobont, Pavel Topala, Emil Oanta, Marek Płaczek, Ioan Carcea, Constantin Carausu, Dumitru Nedelcu. Bristol : Institute of Physics, 2016, s. 667-672, bibliogr. 6 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 145 1757-8981)

426/525
Nr opisu: 0000103559   
A method of computer aided design with self-generative models in NX Siemens environment.
[Aut.]: Cezary Grabowik, Krzysztof Kalinowski, Wojciech Kempa, Iwona Paprocka.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 5 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

427/525
Nr opisu: 0000103567   
A survey on methods of design features identification.
[Aut.]: Cezary Grabowik, Krzysztof Kalinowski, Iwona Paprocka, Wojciech Kempa.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 9 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

428/525
Nr opisu: 0000103529   
Agent-based models in robotized manufacturing cells designing.
[Aut.]: Agnieszka Sękala, Aleksander Gwiazda, Krzysztof Foit, Wacław Banaś, Przemysław Hryniewicz, Gabriel Kost.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-5, bibliogr. 28 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

429/525
Nr opisu: 0000103551   
An automation of design and modelling tasks in NX Siemens environment with original software - cost module.
[Aut.]: Rafał* Zbiciak, Cezary Grabowik, Witold Janik.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 4 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

430/525
Nr opisu: 0000103582   
An automation of design and modelling tasks in NX Siemens environment with original software - generator module.
[Aut.]: Rafał* Zbiciak, Cezary Grabowik, Witold Janik.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 4 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

431/525
Nr opisu: 0000103352   
Analysis of possibility of applying the PVDF foil in industrial vibration sensors.
[Aut.]: Andrzej Wróbel.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-5, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

432/525
Nr opisu: 0000103549   
Analysis of the Hexapod Work Space using integration of a CAD/CAE system and the LabVIEW.
[Aut.]: Krzysztof Herbuś, Piotr Ociepka.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 14 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

433/525
Nr opisu: 0000103532   
Application of CAD/CAE class systems to aerodynamic analysis of electric race cars.
[Aut.]: Łukasz Grabowski, Andrzej Baier, Andrzej Buchacz, Michał* Majzner, Michał Sobek.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 5 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

434/525
Nr opisu: 0000103584   
Application of CBR method for adding the process of cutting tools and parameters selection.
[Aut.]: Piotr Ociepka, Krzysztof Herbuś.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

435/525
Nr opisu: 0000103555   
Application of the MIAS methodology in design of the data acquisition system for wastewater treatment plant.
[Aut.]: Grzegorz Ćwikła, Damian Krenczyk, Adrian Kampa, Grzegorz Gołda.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

436/525
Nr opisu: 0000103596
Carbon fiber based composites stress analysis. Experimental and computer comparative studies.
[Aut.]: Michał Sobek, Andrzej Baier, Andrzej Buchacz, Łukasz Grabowski, M. Majzner.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

437/525
Nr opisu: 0000103560   
Computer aided production planning - SWZ system of order verification.
[Aut.]: Damian Krenczyk, Bożena Skołud.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-7, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

438/525
Nr opisu: 0000103542   
Computer-aided strength analysis of the modernized freight wagon.
[Aut.]: Marek Płaczek, Andrzej Wróbel, Andrzej Baier.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 27 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

439/525
Nr opisu: 0000103553   
Construction typification as the tool for optimizing the functioning of a robotized manufacturing system.
[Aut.]: Aleksander Gwiazda, Wacław Banaś, Agnieszka Sękala, Krzysztof Foit, Przemysław Hryniewicz, Gabriel Kost.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-5, bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

440/525
Nr opisu: 0000103593   
Designing of robotic production lines using CAx software.
[Aut.]: Andrzej Wróbel, P. Langer.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

441/525
Nr opisu: 0000103590   
Determination of the robot location in a workcell of a flexible production line.
[Aut.]: Wacław Banaś, Agnieszka Sękala, Aleksander Gwiazda, Krzysztof Foit, Przemysław Hryniewicz, Gabriel Kost.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

442/525
Nr opisu: 0000103540   
Estimation of overall equipment effectiveness using simulation programme.
[Aut.]: Iwona Paprocka, Wojciech Kempa, Krzysztof Kalinowski, Cezary Grabowik.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 6 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

443/525
Nr opisu: 0000103586   
Implementation of the safety components base on industrial networks.
[Aut.]: Piotr Michalski, Mariusz Hetmańczyk.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 6 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

444/525
Nr opisu: 0000103565   
Influence of throttling of pneumatic actuators at the positioning accuracy.
[Aut.]: Mariusz Hetmańczyk, Piotr Michalski.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-7, bibliogr. 5 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

445/525
Nr opisu: 0000103561   
Integration of the virtual 3D model of a control system with the virtual controller.
[Aut.]: Krzysztof Herbuś, Piotr Ociepka.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 18 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

446/525
Nr opisu: 0000103573   
Modelling of cooperating robotized systems with the use of object-based approach.
[Aut.]: Krzysztof Foit, Aleksander Gwiazda, Wacław Banaś, Agnieszka Sękala, Przemysław Hryniewicz.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 17 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

447/525
Nr opisu: 0000112750   
Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds. Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu.
Bristol : Institute of Physics Publishing, 2015, 1240 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

448/525
Nr opisu: 0000103537   
Modular industrial robots as the tool of process automation in robotized manufacturing cells.
[Aut.]: Aleksander Gwiazda, Wacław Banaś, Agnieszka Sękala, Krzysztof Foit, Przemysław Hryniewicz, Gabriel Kost.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

449/525
Nr opisu: 0000104115   
Multi-assortment rhythmic production planning and control.
[Aut.]: Bożena Skołud, Damian Krenczyk, M. Zemczak.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

450/525
Nr opisu: 0000103563   
Object as a model of intelligent robot in the virtual workspace.
[Aut.]: Krzysztof Foit, Aleksander Gwiazda, Wacław Banaś, Agnieszka Sękala, Przemysław Hryniewicz.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

451/525
Nr opisu: 0000103597   
Object positioning in storages of robotized workcells using LabVIEW Vision.
[Aut.]: Przemysław Hryniewicz, Wacław Banaś, Agnieszka Sękala, Aleksander Gwiazda, Krzysztof Foit, Gabriel Kost.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 17 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

452/525
Nr opisu: 0000103552   
Optimization of the production process using virtual model of a workspace.
[Aut.]: Zbigniew Monica.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

453/525
Nr opisu: 0000103572   
Optimizing parameters of a technical system using quality function deployment method.
[Aut.]: Magdalena* Bączkowicz, Aleksander Gwiazda.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

454/525
Nr opisu: 0000103548   
Production scheduling with discrete and renewable additional resources.
[Aut.]: Krzysztof Kalinowski, Cezary Grabowik, Iwona Paprocka, Wojciech Kempa.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 18 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

455/525
Nr opisu: 0000105671   
Reduction of vibration by using mechatronical subsystem.
[Aut.]: Katarzyna Białas, Andrzej Buchacz.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-5, bibliogr. 18 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

456/525
Nr opisu: 0000103575   
Stand for testing the electrical race car engine.
[Aut.]: Andrzej Baier, J. Franiasz, P. Mierzwa, D. Wylenzek.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 5 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

457/525
Nr opisu: 0000103558   
Strength analysis of parallel robot components in PLM Siemens NX 8.5 program.
[Aut.]: Piotr Ociepka, Krzysztof Herbuś.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 14 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

458/525
Nr opisu: 0000105672   
Technological process supervising using vision systems cooperating with the LabVIEW vision builder.
[Aut.]: Przemysław Hryniewicz, Wacław Banaś, Aleksander Gwiazda, Krzysztof Foit, Agnieszka Sękala, Gabriel Kost.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 21 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

459/525
Nr opisu: 0000103554   
The distributed agent-based approach in the e-manufacturing environment.
[Aut.]: Agnieszka Sękala, Gabriel Kost, Anna* Dobrzańska-Danikiewicz, Wacław Banaś, Krzysztof Foit.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 27 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

460/525
Nr opisu: 0000103571   
The laboratory station for tyres grip testing on different surfaces.
[Aut.]: Krzysztof Kalinowski, Cezary Grabowik, Witold Janik, Grzegorz Ćwikła, M. Skowera.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 9 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

461/525
Nr opisu: 0000103581   
The modular design of robotic workcells in a flexible production line.
[Aut.]: Wacław Banaś, Agnieszka Sękala, Aleksander Gwiazda, Krzysztof Foit, Przemysław Hryniewicz, Gabriel Kost.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

462/525
Nr opisu: 0000103566   
The qualitative assessment of pneumatic actuators operation in terms of vibration criteria.
[Aut.]: Mariusz Hetmańczyk, Piotr Michalski.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-7, bibliogr. 4 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

463/525
Nr opisu: 0000103570   
The role of multi-agent systems in improving performance of manufacturing robotized cells.
[Aut.]: Agnieszka Sękala, Grzegorz Ćwikła, Gabriel Kost.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

464/525
Nr opisu: 0000103538   
The role of the production scheduling system in rescheduling.
[Aut.]: Krzysztof Kalinowski, Cezary Grabowik, Wojciech Kempa, Iwona Paprocka.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 21 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

465/525
Nr opisu: 0000103583   
Thermal analysis and microstructural characterization of Mg-Al-Zn system alloys.
[Aut.]: Mariusz Król, Tomasz Tański, Wojciech Sitek.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 6 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

466/525
Nr opisu: 0000103564   
Time-dependent solution for the manufacturing line with unreliable machine and batched arrivals.
[Aut.]: Wojciech Kempa, Iwona Paprocka, Cezary Grabowik, Krzysztof Kalinowski.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

467/525
Nr opisu: 0000103585   
Time-series pattern recognition with an immune algorithm.
[Aut.]: Iwona Paprocka, Wojciech Kempa, Cezary Grabowik, Krzysztof Kalinowski.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-7, bibliogr. 9 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

468/525
Nr opisu: 0000103550   
Two-Stage orders sequencing system for mixed-model assembly.
[Aut.]: M. Zemczak, Bożena Skołud, Damian Krenczyk.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

469/525
Nr opisu: 0000103589   
Virtual modelling of components of a production system as the tool of lean engineering.
[Aut.]: Zbigniew Monica.
W: Modern technologies in industrial engineering (ModTech2015), 17-20 June 2015, Mamaia, Romania. Eds.: Emil Oanta, Radu Comaneci, Constantin Carausu, Marek Placzek, Viorel Cohal, Pavel Topala, Dumitru Nedelcu. Bristol : Institute of Physics Publishing, 2015, s. 1-6, bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 95 1757-8981)

470/525
Nr opisu: 0000112893
13th European Workshop on Modern Developments and Applications in Microbeam Analysis, Porto, Portugal, 12-16 May 2013. EMAS 2013 Workshop.
Bristol : Institute of Physics Publishing, 2014, 116 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 55 1757-8981)
Publikacja nie należy do bibliografii Uczelni

471/525
Nr opisu: 0000096731   
Phase analysis in duplex stainless steel: comparison of EBSD and quantitative metallography methods.
[Aut.]: Joanna Kamila Michalska, Bartosz* Chmiela.
W: 13th European Workshop on Modern Developments and Applications in Microbeam Analysis, Porto, Portugal, 12-16 May 2013. EMAS 2013 Workshop. Bristol : Institute of Physics Publishing, 2014, s. 1-9, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 55 1757-8981)

472/525
Nr opisu: 0000112855
2013 International Conference on Manufacturing, Optimization, Industrial and Material Engineering. MOIME 2013, Grand Hyatt, Bandung, Indonesia, 9-10 March 2013,.
[B.m.] : Institute of Physics Publishing, 2013, 358 s.
(IOP Conference Series ; Materials Science and Engineering ; vol. 46, iss. 1 1757-8981)
Publikacja nie należy do bibliografii Uczelni

473/525
Nr opisu: 0000095686   
Approximation methods applied in assessment of valve system fatigue failure.
[Aut.]: Grzegorz* Wszołek, P. Czop, Antoni* Skrobol.
W: 2013 International Conference on Manufacturing, Optimization, Industrial and Material Engineering. MOIME 2013, Grand Hyatt, Bandung, Indonesia, 9-10 March 2013,. [B.m.] : Institute of Physics Publishing, 2013, s. 1-10, bibliogr. 6 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 46, iss. 1 1757-8981)

474/525
Nr opisu: 0000083058   
Application of EBSD method for the investigation of microstructure and crystallographic orientation in RE2Zr2O7 TBC.
[Aut.]: B. Chmiel, Maria Sozańska, Grzegorz Moskal.
W: 12th European Workshop on Modern Developments in Microbeam Analysis. EMAS 2011, Angers, France, 15-19 May 2011. [B.m.] : Institute of Physics Publishing, 2012, s. 1-11, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 32, iss. 1 1757-8981)

475/525
Nr opisu: 0000072390   
Aspects of fabrication aluminium matrix heterophase composites by suspension method.
[Aut.]: Anna Dolata, Maciej Dyzia.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B. m.] : Institute of Physics Publishing, 2012, [art. no. 012020] s. 1-7, bibliogr. 18 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

476/525
Nr opisu: 0000072394   
Ceramic or metallic? - material aspects of compact heat regenerator energy efficiency.
[Aut.]: Mariusz Wnęk.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B. m.] : Institute of Physics Publishing, 2012, [art. no. 012022] s. 1-9, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

477/525
Nr opisu: 0000072382   
Changes of microstructure in titanium alloy during high temperature hydrogen treatment.
[Aut.]: Maria Sozańska.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B. m.] : Institute of Physics Publishing, 2012, [art. no. 012011], s. 1-9 bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

478/525
Nr opisu: 0000072335   
Corrosion resistance of premodeled wires made of stainless steel used for heart electrotherapy leaders.
[Aut.]: Joanna** Przondziono, Witold Walke, R. Młynarski, Wiktor** Szatka.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B.m.] : Institute of Physics Publishing, 2012, [art. no. 012016] s. 1-8, bibliogr. 9 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

biomateriały ; ochrona antykorozyjna ; kardiologia ; elektroterapia ; prowadnik kardiologiczny

biomaterials ; corrosion protection ; cardiology ; electrotherapy ; cardiological leader

479/525
Nr opisu: 0000072381   
Degradation of Si-Al aluminide coating after service of turbine blades made of ZhS6K superalloy.
[Aut.]: Bartosz* Chmiela, M. Kianicova, Maria Sozańska, Lucjan Swadźba.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B. m.] : Institute of Physics Publishing, 2012, [art. no. 012010] s. 1-9, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

480/525
Nr opisu: 0000072384   
Hydrogen assisted cracking of 2205 duplex stainless steel in synthetic sea water.
[Aut.]: Joanna Kamila Michalska, J. Łabanowski, Janusz Ćwiek.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B. m.] : Institute of Physics Publishing, 2012, [art. no. 012013] s. 1-7, bibliogr. 7 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

481/525
Nr opisu: 0000072383
Hydrogen effects in duplex stainless steel welded joints - electrochemical studies.
[Aut.]: Joanna Kamila Michalska, J. Łabanowski, Janusz Ćwiek.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B. m.] : Institute of Physics Publishing, 2012, [art. no. 012012] s. 1-8, bibliogr. 10 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

482/525
Nr opisu: 0000072393   
Impact of heat treatment on microstructure of steel 30X padded with wire G18 8Mn.
[Aut.]: M. Łomozik, Janusz Adamiec.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B. m.] : Institute of Physics Publishing, 2012, [art. no. 012021] s. 1-11, bibliogr. 6 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

483/525
Nr opisu: 0000072371   
Liquid metal embrittlement of steel with galvanized coatings.
[Aut.]: Jacek Mendala.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B.m.] : Institute of Physics Publishing, 2012, [art. no. 012002] s. 1-8, bibliogr. 9 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

484/525
Nr opisu: 0000072385
Low-cycle fatigue life of steel P92 under gradual loading.
[Aut.]: Marek** Cieśla, Grzegorz Junak.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B. m.] : Institute of Physics Publishing, 2012, [art. no. 012014] s. 1-11, bibliogr. 19 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

485/525
Nr opisu: 0000072379   
Mechanical and microstructural aspects of severe plastic deformation of austenitic steel.
[Aut.]: Kinga Rodak, Jacek Pawlicki, Marek Tkocz.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B.m.] : Institute of Physics Publishing, 2012, [art. no. 012008] s. 1-7, bibliogr. 9 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

486/525
Nr opisu: 0000072376   
Microstructural studies of carbides in MAR-M247 nickel-based superalloy.
[Aut.]: Agnieszka Szczotok, Kinga Rodak.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B.m.] : Institute of Physics Publishing, 2012, [art. no. 012006] s. 1-11, bibliogr. 22 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

487/525
Nr opisu: 0000072375   
Phase transformations in CMSX-4 nickel-base superalloy.
[Aut.]: Agnieszka Szczotok, Roman** Przeliorz.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B.m.] : Institute of Physics Publishing, 2012, [art. no. 012005] s. 1-5, bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

488/525
Nr opisu: 0000072387   
Preparation of translucent YAG:Ce ceramics by reaction sintering.
[Aut.]: Daniel* Michalik, Małgorzata** Sopicka-Lizer, Justyna* Pawlik-Dobrowolska, Jacek Chrapoński.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B. m.] : Institute of Physics Publishing, 2012, [art. no. 012018] s. 1-6, bibliogr. 26 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

489/525
Nr opisu: 0000072380   
Qualitative and quantitative description of microstructure of alloys from the Fe-Al system.
[Aut.]: Magdalena Jabłońska, Marta Mikuśkiewicz, Agnieszka Tomaszewska.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B.m.] : Institute of Physics Publishing, 2012, [art. no. 012009] s. 1-7, bibliogr. 6 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

490/525
Nr opisu: 0000072377   
Research of the microstructure and precipitation strengthening in a high-temperature Fe-Ni superalloy.
[Aut.]: Kazimierz** Ducki.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B.m.] : Institute of Physics Publishing, 2012, [art. no. 012007] s. 1-11, bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

491/525
Nr opisu: 0000072386   
Study on cracking process of power boiler element.
[Aut.]: Kazimierz** Mutwil, Marek** Cieśla.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B. m.] : Institute of Physics Publishing, 2012, [art. no. 012017] s. 1-11, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

492/525
Nr opisu: 0000072373   
Synergistic influence of Al, Ni, Bi and Sn addition to a zinc bath upon growth kinetics and the structure of coatings.
[Aut.]: Henryk Kania, Piotr** Liberski.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B. m.] : Institute of Physics Publishing, 2012, [art. no. 012004] s. 1-10, bibliogr. 21 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

493/525
Nr opisu: 0000072388   
The effect of pressureless densification on mechanical and tribological properties of fine-grained silicon nitride ceramics.
[Aut.]: Tomasz Pawlik, Małgorzata** Sopicka-Lizer, Jakub Wieczorek.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B. m.] : Institute of Physics Publishing, 2012, [art. no. 012019], bibliogr. 20 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

494/525
Nr opisu: 0000072334   
The effect of strain hardening on resistance to electrochemical corrosion of wires for orthopaedics.
[Aut.]: Joanna** Przondziono, Witold Walke, Eugeniusz Hadasik, Jan** Szymszal.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B. m.] : Institute of Physics Publishing, 2012, [art. no. 012015] s. 1-9, bibliogr. 17 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

biomateriały ; hartowanie powierzchniowe ; pasywacja ; polerowanie ; ochrona antykorozyjna ; ortopedia

biomaterials ; surface hardening ; passivation ; polishing ; corrosion protection ; orthopedics

495/525
Nr opisu: 0000072372   
The structure of coatings obtained in the Zn-31Al-3Mg bath by the batch hot dip method.
[Aut.]: Henryk Kania.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B.m.] : Institute of Physics Publishing, 2012, [art. no. 012003] s. 1-8, bibliogr. 9 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

496/525
Nr opisu: 0000072370   
The structure of Fe-Cr-B coatings obtained using selected methods of thermal spraying.
[Aut.]: Krzysztof Szymański, M. Szpak.
W: Technologies and properties of modern utilised materials. TPMUM 2012, Katowice, Poland, 18 May 2012. [B.m.] : Institute of Physics Publishing, 2012, [art. no. 012001] s. 1-6, bibliogr. 18 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 35 1757-8981)

497/525
Nr opisu: 0000068645   
Analysis of high angle boundaries in directionally solidified turbine blade made of CMSX-4 superalloy.
[Aut.]: Bartosz* Chmiela, Maria Sozańska.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-7, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

498/525
Nr opisu: 0000068656   
Cast AlSi9Cu4 alloy with hybride strenghtened by FexAl y-Al2O3 composite powder.
[Aut.]: Jarosław Piątkowski, Bolesław** Formanek.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-8, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

499/525
Nr opisu: 0000068652   
Corrosion induced by cathodic hydrogen in 2205 duplex stainless steel.
[Aut.]: Joanna Kamila Michalska.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-8, bibliogr. 7 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

500/525
Nr opisu: 0000068640   
Design factors influencing weldability of the Mg-4Y-3RE cast magnesium alloy.
[Aut.]: Agata* Kierzek, Janusz Adamiec.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-9, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

501/525
Nr opisu: 0000068646   
Effect of high-temperature hydrogen treatment on the microstructure and properties of titanium alloy Ti-6Al-4V.
[Aut.]: Maria Sozańska.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-11, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

502/525
Nr opisu: 0000068615   
Effect of temperature and pH of ammonium galvanic bath on the properties of Zn-Co alloy coatings.
[Aut.]: Artur Maciej, Joanna Kamila Michalska, Wojciech Simka, Ginter** Nawrat, Jerzy** Piotrowski.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-6, bibliogr. 23 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

503/525
Nr opisu: 0000068654   
Electrochemical investigations of Cr-Ni-Mo stainless steel used in urology.
[Aut.]: Joanna** Przondziono, Witold Walke.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-9, bibliogr. 14 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

504/525
Nr opisu: 0000068653   
Evaluation of corrosion resistance of casting magnesium alloy AZ31 in NaCl solutions.
[Aut.]: Joanna** Przondziono, Witold Walke, Janusz Szala, Eugeniusz Hadasik, Jakub Wieczorek.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-12, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

505/525
Nr opisu: 0000068696   
Heat treatment of high manganese type X57MnAl27-5 austenitic steel.
[Aut.]: Magdalena Jabłońska, Anna* Śmiglewicz, Grzegorz** Niewielski, Marek** Hetmańczyk.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-6, bibliogr. 7 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

506/525
Nr opisu: 0000068639   
Hot cracking of welded joints of the 7CrMoVTiB 10-10 (T/P24) steel.
[Aut.]: Janusz Adamiec.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-11, bibliogr. 14 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

507/525
Nr opisu: 0000068647   
Influence of casting conditions and alloy additives on the Zn40Al2Cu alloy structure.
[Aut.]: Rafał Michalik, Agnieszka Tomaszewska, Henryk** Woźnica.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-9, bibliogr. 11 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

508/525
Nr opisu: 0000068657   
Influence of planetary milling parameters on the properties of the activated silicon and aluminium nitride powders.
[Aut.]: Tomasz Pawlik, Małgorzata** Sopicka-Lizer, Tomasz* Włodek, Marta Mikuśkiewicz.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-7, bibliogr. 5 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

509/525
Nr opisu: 0000068642   
Influence of the cooling method on the structure of 55AlZn coatings.
[Aut.]: Jacek Mendala.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-7, bibliogr. 10 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

510/525
Nr opisu: 0000068655   
Investigation of phase transformations in ductile cast iron of differential scanning calorimetry.
[Aut.]: Roman** Przeliorz, Jarosław Piątkowski.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-9, bibliogr. 18 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

511/525
Nr opisu: 0000068641   
Process of high temperature synthesis in producing composite carbide powders for thermally sprayed coatings.
[Aut.]: Krzysztof Szymański, Bolesław** Formanek.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-8, bibliogr. 22 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

512/525
Nr opisu: 0000068644   
Quantitative evaluation of carbides in nickel-base superalloy MAR-M247.
[Aut.]: Agnieszka Szczotok.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-11, bibliogr. 16 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

513/525
Nr opisu: 0000068651   
Research of selected properties of two types of high manganese steel wires.
[Aut.]: Agnieszka Tomaszewska, Magdalena Jabłońska, Eugeniusz Hadasik, Grzegorz** Niewielski, R. Kawalla.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-6, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

514/525
Nr opisu: 0000068650   
Research of the microstructure of alloys from the Al-Fe system after high-temperature treatment.
[Aut.]: Magdalena Jabłońska.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-6, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

515/525
Nr opisu: 0000068648   
The hot-deformability and quantitative description of the microstructure of hot-deformed Fe-Ni superalloy.
[Aut.]: Kazimierz** Ducki, Kinga Rodak.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-12, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

516/525
Nr opisu: 0000068643   
The influence of Si addition in 55AlZn bath on the coating structures obtained in the batch hot-dip metallization.
[Aut.]: Jacek Mendala.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-7, bibliogr. 10 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

517/525
Nr opisu: 0000068649   
The structure, properties and a resistance to abrasive wear of railway sections of steel with a different pearlite morphology.
[Aut.]: K. Aniołek, Jerzy** Herian.
W: Technologies and properties of modern utilised materials, Katowice, 20 May 2011. [B.m.] : Elsevier, 2011, s. 1-9, bibliogr. 15 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 22, nr 1 1757-8981)

518/525
Nr opisu: 0000067758   
A comparison of heterogenous and homogenous models of two-phase transonic compressible CO2 flow through a heat pump ejector.
[Aut.]: Zbigniew Buliński, Jacek Smołka, Adam** Fic, Krzysztof* Banasiak, Andrzej Józef Nowak.
W: 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics, Sydney, Australia, 19-23 July, 2010. Bristol : Institute of Physics Publishing, 2010, s. 1-9, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 10, iss. 1 1757-8981)

przepływ transsoniczny ; równanie Rayleigha-Plesseta ; dynamika cieczy

transonic flow ; Rayleigh-Plesset equation ; fluid dynamics

519/525
Nr opisu: 0000083136   
Analysis of influence of measurement conditions on repeatable results of thermal diffusivity of ceramic moulds designed for manufacturing the superalloys castings.
[Aut.]: Grzegorz Moskal, Jan Cwajna.
W: 11th Europhysical Conference on Defects in Insulating Materials (EURODIM 2010), Pecs, Hungary, 12-16 July 2010. Bristol : Institute of Physics Publishing, 2010, s. 1-8, bibliogr. 21 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 10, iss. 1 1757-8981)

520/525
Nr opisu: 0000083145   
Characteristics of selected thermal properties of 8YSZ type powders produced with different methods.
[Aut.]: Grzegorz Moskal.
W: 11th Europhysical Conference on Defects in Insulating Materials (EURODIM 2010), Pecs, Hungary, 12-16 July 2010. Bristol : Institute of Physics Publishing, 2010, s. 1-8, bibliogr. 12 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 15, iss. 1 1757-8981)

521/525
Nr opisu: 0000068736   
Investigation of hot cracking resistance of 2205 duplex steel.
[Aut.]: Janusz Adamiec, B. Ścibisz.
W: Proceedings of the 11th European Workshop of the European Microbeam Analysis Society (EMAS) on Modern Developments and Applications in Microbeam Analysis, Gdynia/Rumia, Gdansk, Poland, 10-14 May 2009. Eds: J. L. Labar, C. T. Walker, M. Żelechower, P. Zięba. Bristol : Institute of Physics Publishing, 2010, s. 1-8, bibliogr. 9 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 7 1757-8981)

522/525
Nr opisu: 0000068737   
Investigation of susceptibility to hot cracking of MSR-B magnesium alloy.
[Aut.]: Janusz Adamiec, S. Mucha.
W: Proceedings of the 11th European Workshop of the European Microbeam Analysis Society (EMAS) on Modern Developments and Applications in Microbeam Analysis, Gdynia/Rumia, Gdansk, Poland, 10-14 May 2009. Eds: J. L. Labar, C. T. Walker, M. Żelechower, P. Zięba. Bristol : Institute of Physics Publishing, 2010, s. 1-11, bibliogr. 8 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 7 1757-8981)

523/525
Nr opisu: 0000068738   
Microstructural analysis of titanium aluminide formed in situ in an aluminium matrix composite.
[Aut.]: Anita Olszówka-Myalska, W. Maziarz.
W: Proceedings of the 11th European Workshop of the European Microbeam Analysis Society (EMAS) on Modern Developments and Applications in Microbeam Analysis, Gdynia/Rumia, Gdansk, Poland, 10-14 May 2009. Eds: J. L. Labar, C. T. Walker, M. Żelechower, P. Zięba. Bristol : Institute of Physics Publishing, 2010, s. 1-6, bibliogr. 7 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 7 1757-8981)

524/525
Nr opisu: 0000068739   
Microstructural characteristics and technological properties of YSZ-type powders designed for thermal spraying of TBC.
[Aut.]: Grzegorz Moskal.
W: Proceedings of the 11th European Workshop of the European Microbeam Analysis Society (EMAS) on Modern Developments and Applications in Microbeam Analysis, Gdynia/Rumia, Gdansk, Poland, 10-14 May 2009. Eds: J. L. Labar, C. T. Walker, M. Żelechower, P. Zięba. Bristol : Institute of Physics Publishing, 2010, s. 1-10, bibliogr. 10 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 7 1757-8981)

525/525
Nr opisu: 0000068740   
Studies of the AZ91 magnesium alloy / SiO2-coated carbon fibres composite microstructure.
[Aut.]: Anita Olszówka-Myalska, Agnieszka* Botor-Probierz.
W: Proceedings of the 11th European Workshop of the European Microbeam Analysis Society (EMAS) on Modern Developments and Applications in Microbeam Analysis, Gdynia/Rumia, Gdansk, Poland, 10-14 May 2009. Eds: J. L. Labar [et al.]. Bristol : Institute of Physics Publishing, 2010, s. 1-9, bibliogr. 13 poz. (IOP Conference Series ; Materials Science and Engineering ; vol. 7 1757-8981)

stosując format:
Nowe wyszukiwanie