Wynik wyszukiwania
Zapytanie: J MATER PROCESS TECHNOL
Liczba odnalezionych rekordów: 194



Przejście do opcji zmiany formatu | Wyświetlenie wyników w wersji do druku | Pobranie pliku do edytora | Przesłanie wyników do modułu analizy | excel | Nowe wyszukiwanie
1/194
Nr opisu: 0000089630   
Carburiser properties transfer into the structure of melted cast iron.
[Aut.]: Krzysztof Janerka, Mirosława Pawlyta, Jan Jezierski, Jan Szajnar, Dariusz Bartocha.
-J. Mater. Process. Technol. 2014 vol. 214 iss. 4, s. 794-801, bibliogr. 10 poz.. Impact Factor 2.236. Punktacja MNiSW 40.000

żeliwo szare ; żeliwo syntetyczne ; nawęglacz ; struktura żeliwa ; dziedziczenie struktury

grey cast iron ; synthetic cast iron ; carburizer ; cast iron structure ; heredity of structure

2/194
Nr opisu: 0000040985   
Laser surface treatment of multicrystalline silicon for enhancing optical properties.
[Aut.]: Leszek** Dobrzański, Aleksandra Drygała, Klaudiusz Gołombek, P. Panek, E. Bielańska, P. Zięba.
-J. Mater. Process. Technol. 2008 vol. 201 iss. 1/3, s. 291-296, bibliogr. 20 poz.. Impact Factor 1.143

obróbka powierzchni ; obróbka laserowa ; krzem multikrystaliczny ; fotowoltaika

surface treatment ; laser processing ; multicrystalline silicon ; photovoltaics

3/194
Nr opisu: 0000040988   
Structure and mechanical properties of gradient PVD coatings.
[Aut.]: Leszek** Dobrzański, Ludwina* Żukowska, Jarosław Mikuła, Klaudiusz Gołombek, Daniel Pakuła, M. Pancielejko.
-J. Mater. Process. Technol. 2008 vol. 201 iss. 1/3, s. 310-314, bibliogr. 17 poz.. Impact Factor 1.143

materiały narzędziowe ; powłoka gradientowa ; PVD

tool materials ; gradient coating ; PVD

4/194
Nr opisu: 0000040999   
The effect of average cooling rates on the microstructure of the Al-20% Si high pressure die casting alloy used for monolithic cylinder blocks.
[Aut.]: H. Yamagata, Wojciech* Kasprzak, M. Aniolek, H. Kurita, J. Sokolowski.
-J. Mater. Process. Technol. 2008 vol. 203 iss. 1/3, s. 333-341, bibliogr. 15 poz.. Impact Factor 1.143

stop AlSi ; odlewnictwo ciśnieniowe ; blok cylindrów ; krzepnięcie ; mikrostruktura ; krzem

AlSi alloy ; high pressure die casting ; cylinder block ; solidification ; microstructure ; silicon

5/194
Nr opisu: 0000041012   
Thermal and metallographic characteristics of the Al-20% Si high-pressure die-casting alloy for monolithic cylinder blocks.
[Aut.]: H. Yamagata, H. Kurita, M. Aniolek, Wojciech* Kasprzak, J. Sokołowski.
-J. Mater. Process. Technol. 2008 vol. 199 iss. 1/3, s. 84-90, bibliogr. 12 poz.. Impact Factor 1.143

stop AlSi ; krzem ; odlewnictwo ciśnieniowe ; analiza cieplna ; szybkie chłodzenie

AlSi alloy ; silicon ; high pressure die casting ; thermal analysis ; rapid quenching

6/194
Nr opisu: 0000039159   
Applications of the artificial intelligence methods for modeling of the ACAlSi7Cu alloy crystallization process.
[Aut.]: Leszek** Dobrzański, Rafał* Maniara, J. Sokolowski, Wojciech* Kasprzak, Mariusz Krupiński, Zbigniew Brytan.
-J. Mater. Process. Technol. 2007 vol. 192/193, s. 582-587, bibliogr. 14 poz.. Impact Factor 0.816

sieć neuronowa ; analiza derywacyjna ; modyfikacja termiczna ; proces krystalizacji ; ocena ilościowa

neural network ; derivation analysis ; thermal modification ; crystallization process ; quantitative evaluation

7/194
Nr opisu: 0000039165   
Comparison of the surface alloying of the 32CrMoV12-28 tool steel using TiC and WC powder.
[Aut.]: Leszek** Dobrzański, Krzysztof Labisz, Ewa Jonda, Andrzej Klimpel.
-J. Mater. Process. Technol. 2007 vol. 191 iss. 1/3, s. 321-325, bibliogr. 12 poz.. Impact Factor 0.816

stopowanie laserowe ; przetapianie laserowe ; węglik tytanu ; węglik wolframu

laser alloying ; laser remelting ; titanium carbide ; tungsten carbide

8/194
Nr opisu: 0000039162   
Computer simulation of hard magnetic composite materials Nd-Fe-B properties.
[Aut.]: Leszek** Dobrzański, Małgorzata Drak, Jacek Trzaska.
-J. Mater. Process. Technol. 2007 vol. 192/193, s. 595-601, bibliogr. 22 poz.. Impact Factor 0.816

sieć neuronowa ; symulacja ; Nd-Fe-B ; materiał magnetyczny ; materiały kompozytowe

neural network ; simulation ; Nd-Fe-B ; magnetic material ; composite materials

9/194
Nr opisu: 0000039166   
Corrosion behavior of vacuum sintered duplex stainless steels.
[Aut.]: Leszek** Dobrzański, Zbigniew Brytan, M. Actis Grande, M. Rosso.
-J. Mater. Process. Technol. 2007 vol. 191 iss. 1/3, s. 161-164, bibliogr. 5 poz.. Impact Factor 0.816

korozja wżerowa ; duplex ; stal spiekana ; stal nierdzewna

pitting corrosion ; duplex ; sintered steel ; stainless steel

10/194
Nr opisu: 0000039164   
Corrosion resistance of sintered duplex stainless steels in the salt fog spray test.
[Aut.]: Leszek** Dobrzański, Zbigniew Brytan, M. Actis Grande, M. Rosso.
-J. Mater. Process. Technol. 2007 vol. 192/193, s. 443-448, bibliogr. 22 poz.. Impact Factor 0.816

metalurgia proszków ; stal spiekana ; stal nierdzewna duplex ; diagram Schaefflera ; badanie w mgle solnej ; odporność korozyjna

powder metallurgy ; sintered steel ; duplex stainless steel ; Schaeffler diagram ; salt fog test ; corrosion resistance

11/194
Nr opisu: 0000040810   
Dynamic parameters of electromagnetic feeder of molten metal.
[Aut.]: L. Musil, Zofia* Pragłowska-Gorczyńska.
-J. Mater. Process. Technol. 2007 vol. 181 iss. 1/3, s. 291-295, bibliogr. 4 poz.. Impact Factor 0.816

dozownik elektromagnetyczny ; magnetohydrodynamika metalurgiczna ; pole elektromagnetyczne ; stopiony metal

electromagnetic feeder ; metallurgical magnetohydrodynamics ; electromagnetic field ; molten metal

12/194
Nr opisu: 0000039167   
Effect of cooling rate on the solidification behavior of AC AlSi7Cu2 alloy.
[Aut.]: Leszek** Dobrzański, Rafał* Maniara, J. Sokołowski, Wojciech* Kasprzak.
-J. Mater. Process. Technol. 2007 vol. 191 iss. 1/3, s. 317-320, bibliogr. 11 poz.. Impact Factor 0.816

stop aluminium ; modyfikacja krzemu ; przechłodzenie ; charakterystyka cieplna ; krzem eutektyczny

aluminium alloy ; silicon modification ; undercooling ; thermal characteristic ; eutectic silicon ; eutectic nucleation temperature

13/194
Nr opisu: 0000039168   
Laser processing of multicrystalline silicon for texturization of solar cells.
[Aut.]: Leszek** Dobrzański, Aleksandra Drygała.
-J. Mater. Process. Technol. 2007 vol. 191 iss. 1/3, s. 228-231, bibliogr. 15 poz.. Impact Factor 0.816

ogniwo słoneczne ; krzem multikrystaliczny ; obróbka powierzchni ; obróbka laserowa

solar cell ; multicrystalline silicon ; surface treatment ; laser processing

14/194
Nr opisu: 0000039157   
Modelling of CCT diagrams for engineering and constructional steels.
[Aut.]: Jacek Trzaska, Leszek** Dobrzański.
-J. Mater. Process. Technol. 2007 vol. 192/193, s. 504-510, bibliogr. 14 poz.. Impact Factor 0.816

diagram CCT ; modelowanie ; sieć neuronowa ; stal konstrukcyjna

CCT diagram ; modelling ; neural network ; constructional steel

15/194
Nr opisu: 0000041013   
New possibilities of composite materials application - materials of specific magnetic properties.
[Aut.]: Leszek** Dobrzański, Małgorzata Drak, Bogusław Ziębowicz.
-J. Mater. Process. Technol. 2007 vol. 191 iss. 1/3, s. 352-355, bibliogr. 14 poz.. Impact Factor 0.816

materiał magnetyczny ; Nd-Fe-B ; FINEMET ; materiały kompozytowe

magnetic material ; Nd-Fe-B ; FINEMET ; composite materials

16/194
Nr opisu: 0000039158   
Structure and properties of magnesium cast alloys.
[Aut.]: Leszek** Dobrzański, Tomasz Tański, L. Ciżek, Zbigniew Brytan.
-J. Mater. Process. Technol. 2007 vol. 192/193, s. 567-574, bibliogr. 16 poz.. Impact Factor 0.816

stop magnezu ; obróbka cieplna ; struktura stopu ; własności mechaniczne ; wydzielanie

magnesium alloy ; heat treatment ; structure of alloy ; mechanical properties ; precipitation

17/194
Nr opisu: 0000030527   
Achievements in mechanical & materials engineering - preface.
[Aut.]: Leszek** Dobrzański.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 1-3

18/194
Nr opisu: 0000030645   
Corrosion of Cr-Ni-Mo steel implants electrically stimulated.
[Aut.]: Janusz Szewczenko, Jan** Marciniak.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 404-410, bibliogr. 19 poz.. Impact Factor 0.615

implant ; warstwa pasywna ; stymulacja elektryczna ; zrost kostny

implant ; passive layer ; electrical stimulation ; bone union

19/194
Nr opisu: 0000030643   
Dispersion analysis of NiAl-TiC-Al2O3 composite powder ground in a high-energy attritorial mill.
[Aut.]: G. Dercz, L. Pajak, Bolesław** Formanek.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 334-337, bibliogr. 20 poz.. Impact Factor 0.615

proszek kompozytowy ; analiza dyspersyjna ; ścieralność ; metoda Rietvelda

composite powder ; dispersion analysis ; attrition ; Rietveld method

20/194
Nr opisu: 0000030389   
Electrochemical behavior of Fe78Si9B13 alloy in sulphate and chloride solution.
[Aut.]: Danuta** Szewieczek, Aleksandra* Baron, Ginter** Nawrat.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 411-415, bibliogr. 17 poz.. Impact Factor 0.615

korozja elektrochemiczna ; stop na osnowie Fe ; materiał amorficzny

electrochemical corrosion ; Fe-based alloy ; amorphous material

21/194
Nr opisu: 0000030641   
Glassy carbon particles as component to modification of tribological properties.
[Aut.]: Jerzy Myalski, Józef** Śleziona.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 291-298, bibliogr. 10 poz.. Impact Factor 0.615

kompozyt z osnową metaliczną ; cząstka ; węgiel szklisty ; właściwości tribologiczne ; zużycie ; współczynnik tarcia

metal matrix composite ; particle ; glassy carbon ; tribological properties ; wear ; coefficient of friction

22/194
Nr opisu: 0000030538   
Influence of weld imperfection on short circuit GMA welding arc stability.
[Aut.]: Krzysztof** Luksa.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 285-290, bibliogr. 14 poz.. Impact Factor 0.615

spawanie ; spawanie GMA ; monitorowanie spawania

welding ; GMA welding ; welding monitoring

23/194
Nr opisu: 0000030534   
Metal injection moulding of HS12-1-5-5 high-speed steel using a PW-HDPE based binder.
[Aut.]: Leszek** Dobrzański, Grzegorz Matula, G. Herranz, A. Varez, B. Levenfeld, J. Torralba.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 173-178, bibliogr. 9 poz.. Impact Factor 0.615

stal szybkotnąca ; formowanie wtryskowe proszku ; metalurgia proszków ; spiekanie

high speed steel ; powder injection moulding ; powder metallurgy ; sintering

24/194
Nr opisu: 0000030642   
Nanocrystalline soft magnetic composite cores.
[Aut.]: Ryszard** Nowosielski, J. Wysłocki, I. Wnuk, Paweł* Gramatyka.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 324-329, bibliogr. 17 poz.. Impact Factor 0.615

struktura nanokrystaliczna ; właściwości magnetyczne ; stop FINEMET ; rdzeń proszkowy ; nanokompozyty

nanocrystalline structure ; magnetic properties ; FINEMET alloy ; powder core ; nanocomposites

25/194
Nr opisu: 0000030530   
Properties of composite materials with polymer matrix reinforced with Nd-Fe-B hard magnetic particles.
[Aut.]: Leszek** Dobrzański, Małgorzata Drak.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 149-156, bibliogr. 22 poz.. Impact Factor 0.615

magnes trwały ; kompozyty ; Nd-Fe-B ; zużycie przez korozję

permanent magnet ; composites ; Nd-Fe-B ; corrosive wear

26/194
Nr opisu: 0000030533   
Prototype of an expert system for selection of coatings for metals.
[Aut.]: Leszek** Dobrzański, Janusz Madejski.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 163-172, bibliogr. 28 poz.. Impact Factor 0.615

system ekspertowy ; powłoka ; nanoszenie powłok ; reguła ; system wspomagania decyzji

expert system ; coating ; coating deposition ; rule ; decision support system

27/194
Nr opisu: 0000030392   
Sensitivity of mechatronical systems represented by polar graphs and structural numbers as models of discrete systems.
[Aut.]: Andrzej Buchacz.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 55-62, bibliogr. 21 poz.. Impact Factor 0.615

synteza wspomagana komputerowo ; projekt ; charakterystyka dynamiczna ; hipergraf ; struktura ; system

computer aided synthesis ; design ; dynamical characteristics ; hypergraph ; structure ; system

28/194
Nr opisu: 0000030529   
Significance of materials science for the future development of societies.
[Aut.]: Leszek** Dobrzański.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 133-148, bibliogr. 16 poz.. Impact Factor 0.615

jakość życia ; projektowanie inżynierskie ; projektowanie materiałowe ; wytwarzanie ; inżynieria materiałowa

quality of life ; engineering design ; materials design ; manufacturing ; materials science

29/194
Nr opisu: 0000030537   
Structure and properties of aluminium cast composites strengthened by dispersion phases.
[Aut.]: Anna Dolata-Grosz, Józef** Śleziona, Bolesław** Formanek.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 192-197, bibliogr. 18 poz.. Impact Factor 0.615

kompozyty ; kompozyt na osnowie stopów aluminium ; cząstka ceramiczna ; właściwości mechaniczne ; struktura

composites ; aluminium matrix composite ; ceramic particle ; mechanical properties ; structure

30/194
Nr opisu: 0000030528   
Structure and properties of laser alloyed surface layers on the hot-work tool steel.
[Aut.]: Mirosław Bonek, Leszek** Dobrzański, Eugeniusz* Hajduczek, Andrzej Klimpel.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 45-54, bibliogr. 7 poz.. Impact Factor 0.615

stal narzędziowa do pracy na gorąco ; warstwa wierzchnia ; stopowanie ; laser diodowy dużej mocy

hot-work tool steel ; surface layer ; alloying ; high power diode laser

31/194
Nr opisu: 0000030650   
Structure and properties of the Fe73.5Cu1Nb3Si13.5B9 alloy powders bound with polyethylene.
[Aut.]: Bogusław Ziębowicz, Danuta** Szewieczek, Leszek** Dobrzański.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 457-462, bibliogr. 13 poz.. Impact Factor 0.615

nanokompozyty ; stop FINEMET ; krystalit ; nanokrystalizacja ; rozdrabnianie ; tłoczenie

nanocomposites ; FINEMET alloy ; crystallite ; nanocrystallization ; grinding ; pressing

32/194
Nr opisu: 0000030532   
Structure of the nanocrystalline coatings obtained on the CAE process on the sintered tool materials.
[Aut.]: Leszek** Dobrzański, Klaudiusz Gołombek, Eugeniusz* Hajduczek.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 157-162, bibliogr. 15 poz.. Impact Factor 0.615

PVD ; powłoka ; węglik spiekany ; cement ; TEM ; SEM ; GDOES

PVD ; coating ; cemented carbide ; cement ; TEM ; SEM ; GDOES

33/194
Nr opisu: 0000030390   
The acceptation of the production orders for the realisation in the manufacturing assembly systems.
[Aut.]: Anna* Dobrzańska-Danikiewicz.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 123-132, bibliogr. 7 poz.. Impact Factor 0.615

system montażowy ; wytwarzanie ; reguły dyspozytorskie ; liczność partii

assembly system ; manufacturing ; dispatching rules ; batch size

34/194
Nr opisu: 0000030536   
The structure and properties of PM composite materials based on EN AW-2124 aluminum alloy reinforced with the BN or Al2O3 ceramic particles.
[Aut.]: Leszek** Dobrzański, Anna Włodarczyk, Marcin Adamiak.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 186-191, bibliogr. 8 poz.. Impact Factor 0.615

stop aluminium ; kompozyty ; metalurgia proszków ; właściwości mechaniczne

aluminium alloy ; composites ; powder metallurgy ; mechanical properties

35/194
Nr opisu: 0000030391   
The study of the technology of laser and plasma surfacing of engine valves face made of X40CrSiMo10-2 steel using cobalt-based powders.
[Aut.]: Andrzej Klimpel, Leszek** Dobrzański, Aleksander Lisiecki, Damian Janicki.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 251-256, bibliogr. 5 poz.. Impact Factor 0.615

laser ; plazma ; napawanie ; PTA ; HPDL ; LPS ; zawór silnika ; stellit

laser ; plasma ; surfacing ; PTA ; HPDL ; LPS ; engine valve ; stellite

36/194
Nr opisu: 0000030651   
The use of miniplates in mandibular fractures-biomechanical analysis.
[Aut.]: Anna Ziębowicz, Jan** Marciniak.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 452-456, bibliogr. 13 poz.. Impact Factor 0.615

żuchwa ; minipłytka ; interferometria holograficzna ; MES ; analiza przemieszczeń

mandible ; miniplate ; holographic interferometry ; FEM ; displacement analysis

37/194
Nr opisu: 0000030535   
Tribological properties of the PVD and CVD coatings deposited onto the nitride tool ceramics.
[Aut.]: Leszek** Dobrzański, Daniel Pakuła, A. Kriz, M. Sokovic, J. Kopac.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 179-185, bibliogr. 25 poz.. Impact Factor 0.615

ceramika azotkowa ; powłoka wielowarstwowa ; powłoka wieloskładnikowa ; PVD ; CVD ; pin-on-disc ; mikrotwardość ; próba zarysowania

nitride ceramics ; multi-layer coating ; multicomponent coating ; PVD ; CVD ; pin-on-disc ; microhardness ; scratch test

38/194
Nr opisu: 0000030678   
Vacuum granulation of ceramic powders - device and ability.
[Aut.]: Stanisław** Serkowski, M. Muller.
-J. Mater. Process. Technol. 2006 vol. 175 no 1/3, s. 382-386, bibliogr. 12 poz.. Impact Factor 0.615

tlenek glinu ; granulacja próżniowa ; proszek ceramiczny ; stężenie proszków

alumina ; vacuum granulation ; ceramic powder ; concentration of powders

39/194
Nr opisu: 0000014689   
A study of worn wear plates of fan blades of steel mill fumes suction system.
[Aut.]: Andrzej Klimpel, Leszek** Dobrzański, Damian Janicki.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1062-1067, bibliogr. 20 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

łopatka wentylatora ; płyta ścierna ; erozja

fan blade ; wear plate ; erosion

40/194
Nr opisu: 0000014635   
Abrasion resistance of GMA metal cored wires surfaced deposits.
[Aut.]: Andrzej Klimpel, Leszek** Dobrzański, Damian Janicki, Aleksander Lisiecki.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1056-1061, bibliogr. 17 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

inżynieria powierzchni ; MCAW ; GMA

surfacing ; MCAW ; GMA

41/194
Nr opisu: 0000016624   
Al-FeAl-TiAl-Al2O3 composite with hybrid reinforcement.
[Aut.]: Anna Dolata-Grosz, Bolesław** Formanek, Józef** Śleziona, Jakub Wieczorek.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 33-38, bibliogr. 31 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

42/194
Nr opisu: 0000014712   
Algorithm of the mould thermal parameters identification in the system casting-mould-environment.
[Aut.]: Ewa Majchrzak, Jerzy Mendakiewicz, Alicja Piasecka-Belkhayat.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1544-1549, bibliogr. 7 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

proces krzepnięcia ; zagadnienie odwrotne ; estymacja parametrów ; metoda elementów brzegowych

solidification process ; inverse problem ; parameter estimation ; boundary element method

43/194
Nr opisu: 0000014714   
Application of genetic methods in materials' design.
[Aut.]: Wojciech Sitek, Leszek** Dobrzański.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1607-1611, bibliogr. 3 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

algorytm genetyczny ; stal szybkotnąca ; skład chemiczny ; optymalizacja ; twardość wtórna ; projektowanie

genetic algorithm ; high speed steel ; chemical composition ; optimization ; secondary hardness ; designing

44/194
Nr opisu: 0000014715   
Application of neural networks for designing the chemical composition of steel with the assumed hardness after cooling from the austenitising temperature.
[Aut.]: Jacek Trzaska, Leszek** Dobrzański.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1637-1643, bibliogr. 15 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

sieć neuronowa ; diagram CCT ; twardość ; modelowanie

neural network ; CCT diagram ; hardness ; modelling

45/194
Nr opisu: 0000016630   
Biomechanical analysis of stent-oesophagus system.
[Aut.]: Wojciech Kajzer, Marcin Kaczmarek, Jan** Marciniak.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 196-202, bibliogr. 16 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achivements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

biomateriały ; metoda elementów skończonych

biomaterials ; finite element method

46/194
Nr opisu: 0000016621   
Changes in the structure of alloy on the matrix of FeAl intermetallic phase after primary crystallization and homogenizing treatment.
[Aut.]: Janusz Cebulski, Stanisław** Lalik.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 4-8, bibliogr. 21 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

struktura ; intermetalik

structure ; intermetallic

47/194
Nr opisu: 0000014630   
Characterization of the Co-base layers obtained by laser cladding technique.
[Aut.]: A. Zieliński, H. Smoleńska, W. Serbiński, W. Konczewicz, Andrzej Klimpel.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 958-963, bibliogr. 8 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

napawanie laserowe ; zawór wydechowy

laser cladding ; exhaust valve

48/194
Nr opisu: 0000016639   
Charge materials and technology of melt and structure of gray cast iron.
[Aut.]: Dariusz Bartocha, Krzysztof Janerka, Jacek Suchoń.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 465-470, bibliogr. 7 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

żeliwo szare ; materiał wsadowy ; własności mechaniczne

gray cast iron ; charge material ; mechanical properties

49/194
Nr opisu: 0000014624   
Chemical pipelines material fatigue.
[Aut.]: Jerzy Okrajni, Kazimierz** Mutwil, Marek** Cieśla.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 897-904, bibliogr. 21 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

rurociąg chemiczny ; zmęczenie ; zmiany struktury ; złamanie

chemical pipeline ; fatigue ; structure changes ; fracture

50/194
Nr opisu: 0000015136   
Chosen aspects of evaluation of productive processes on the example of productive chains of sections type V29.
[Aut.]: Marek Roszak, Stanisław* Tkaczyk.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 770-776, bibliogr. 19 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

łańcuch produkcyjny ; analiza wartości ; jakość ; koszt ; czas

productive chain ; value analysis ; quality ; cost ; time

51/194
Nr opisu: 0000016631   
Comparison of structure and properties of the HS12-1-5-5 type highspeed steel fabricated using the pressureless forming and PIM methods.
[Aut.]: Grzegorz Matula, Leszek** Dobrzański, A. Varez, B. Levenfeld, J. Torralba.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 230-235, bibliogr. 16 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

formowanie wtryskowe proszku ; formowanie bezciśnieniowe ; metalurgia proszków ; spiekanie ; stal szybkotnąca

powder injection moulding ; pressureless forming ; powder metallurgy ; sintering ; high speed steel

52/194
Nr opisu: 0000014619   
Comparison of the structure and properties of the PVD and CVD coatings deposited on nitride tool ceramics.
[Aut.]: Leszek** Dobrzański, Daniel Pakuła.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 832-842, bibliogr. 18 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

PVD ; CVD ; powłoka wielowarstwowa ; powłoka gradientowa ; ceramika azotkowa ; Si3N4 ; TEM ; SEM ; GDOS ; scratch test

PVD ; CVD ; multi-layer coating ; gradient coating ; nitride ceramics ; Si3N4 ; TEM ; SEM ; GDOS ; scratch test

53/194
Nr opisu: 0000014631   
Comparison of the structures of the hot-work tool steels laser modified surface layers.
[Aut.]: Leszek** Dobrzański, Mirosław Bonek, Eugeniusz* Hajduczek, Andrzej Klimpel, Aleksander Lisiecki.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1014-1024, bibliogr. 21 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

stal narzędziowa do pracy na gorąco ; warstwa powierzchniowa ; powłoka gradientowa ; przetapianie ; stopowanie ; laser diodowy dużej mocy

hot-work alloy tool steel ; surface layer ; gradient coating ; remelting ; alloying ; high power diode laser

54/194
Nr opisu: 0000019232   
Computer aided classification of flaws occurred during casting of aluminum.
[Aut.]: Leszek** Dobrzański, Mariusz Krupiński, Andrzej Sokołowski.
-J. Mater. Process. Technol. 2005 vol. 167 no. 2/3, s. 456-462, bibliogr. 11 poz.. Impact Factor 0.592

sieć neuronowa ; analiza obrazu ; wady gazowe ; stop aluminium

neural network ; image analysis ; gas defects ; aluminium alloy

55/194
Nr opisu: 0000016184   
Continual induction hardening of axi-symmetric bodies.
[Aut.]: I. Dolezel, Jerzy Barglik, B. Ulrych.
-J. Mater. Process. Technol. 2005 vol. 161 iss. 1/2, s. 269-275, bibliogr. 7 poz.. Impact Factor 0.592

ciągłe hartowanie indukcyjne ; nagrzewanie indukcyjne ; pole elektromagnetyczne ; pole temperatury ; twardość ; analiza numeryczna

continual induction hardening ; induction heating ; electromagnetic field ; temperature field ; hardening ; numerical analysis

56/194
Nr opisu: 0000015072   
Corrosion resistance of intramedullary nails used in elastic osteosynthesis of children.
[Aut.]: Anita Krauze, Anna Ziębowicz, Jan** Marciniak.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 209-214, bibliogr. 25 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

gwóźdź śródszpikowy ; badanie korozyjne ; stal austenityczna

intramedullary nail ; corrosion test ; austenitic steel

57/194
Nr opisu: 0000014616   
Corrosion resistance of multilayer coatings deposited by PVD techniques onto the brass substrate.
[Aut.]: Leszek** Dobrzański, Krzysztof Lukaszkowicz, Adam Zarychta, L. Cunha.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 816-821, bibliogr. 21 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

powłoka wielowarstwowa ; korozja

multilayer coating ; corrosion

58/194
Nr opisu: 0000014613   
Corrosion resistance of the polymer matrix hard magnetic composite materials Nd-Fe-B.
[Aut.]: Leszek** Dobrzański, Małgorzata Drak, Jacek Trzaska.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 795-804, bibliogr. 23 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

powłoka ochronna ; magnes trwały ; Nd-Fe-B ; materiały kompozytowe ; zużycie przez korozję ; sieć neuronowa

protective coating ; permanent magnet ; Nd-Fe-B ; composite materials ; corrosive wear ; neural network

59/194
Nr opisu: 0000014718   
Cutting properties of the Al2O3+SiC(w) based tool ceramic reinforced with the PVD and CVD wear resistant coatings.
[Aut.]: M. Sokovic, Jarosław Mikuła, Leszek** Dobrzański, J. Kopac, L. Kosec, P. Panjan, Janusz Madejski, A. Piech.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 924-929, bibliogr. 24 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

ceramika tlenkowa ; Al2O3 ; SiC ; powłoka gradientowa ; powłoka wielowarstwowa ; powłoka wieloskładnikowa ; PVD ; CVD ; TEM ; SEM

oxide ceramics ; Al2O3 ; SiC ; gradient coating ; multilayer coating ; multicomponent coating ; PVD ; CVD ; TEM ; SEM

60/194
Nr opisu: 0000014628   
Electrochemical corrosion and its influence on magnetic properties of Fe75.5Si13.5B9Nb3Cu1 alloy.
[Aut.]: Danuta** Szewieczek, Aleksandra* Baron.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 940-946, bibliogr. 21 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

stop na osnowie Fe ; struktura amorficzna ; struktura nanokrystaliczna ; mechanizm korozji ; właściwości elektrochemiczne ; właściwości magnetyczne

Fe-based alloy ; amorphous structure ; nanocrystalline structure ; corrosion mechanism ; electrochemical properties ; magnetic properties

61/194
Nr opisu: 0000014693   
Employment of the finite element method for determining stresses in coatings obtained on high-speed steel with the PVD process.
[Aut.]: Leszek** Dobrzański, Agata Śliwa, Waldemar Kwaśny.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1192-1196, bibliogr. 18 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

powłoka PVD ; symulacja komputerowa ; narażenia

PVD coating ; computer simulation ; stresses

62/194
Nr opisu: 0000014694   
Experimental and numerical biomechanical analysis of vascular stent.
[Aut.]: Witold Walke, Zbigniew Paszenda, J. Filipiak.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1263-1268, bibliogr. 25 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

stent naczyniowy ; metoda elementów skończonych ; stal austenityczna

vessel stent ; finite element method ; austenitic steel

63/194
Nr opisu: 0000016633   
Ferromagnetic properties of polymer nanocomposites containing Fe78Si9B13 powder particles.
[Aut.]: Ryszard** Nowosielski, J. Wysłocki, I. Wnuk, Piotr Sakiewicz, Paweł* Gramatyka.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 242-247, bibliogr. 20 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

właściwości magnetyczne ; struktura nanokrystaliczna ; rdzeń proszkowy ; nanokompozyty ; stop Fe78-Si9-B13

magnetic properties ; nanocrystalline structure ; powder core ; nanocomposites ; Fe78-Si9-B13 alloy

64/194
Nr opisu: 0000014626   
Growth of corrosion products on thermally sprayed coatings with FeAl intermetallic phases in aggressive environments.
[Aut.]: Bożena Szczucka-Lasota, Bolesław** Formanek, Adam** Hernas.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 930-934, bibliogr. 20 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

faza międzymetaliczna ; odporność korozyjna ; HVOF

intermetallic phase ; corrosion resistance ; HVOF

65/194
Nr opisu: 0000014719   
Hybrid graphs in modelling and analysis of discrete-continuous mechanical systems.
[Aut.]: Agnieszka Sękala, Jerzy Świder.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1436-1443, bibliogr. 8 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

graf hybrydowy ; graf przepływowy ; macierz

hybrid graph ; flow graph ; matrix

66/194
Nr opisu: 0000016634   
Influence of structure on the evolution of magnetic and mechanical properties of amorphous and nanocrystalline Fe85.4HF1.4B13.2alloy.
[Aut.]: Danuta** Szewieczek, Sabina Lesz.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 254-259, bibliogr. 31 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

stop nanokrystaliczny ; morfologia przełomu ; własności mechaniczne ; własności magnetyczne

nanocrystalline alloy ; fracture morphology ; mechanical properties ; magnetic properties

67/194
Nr opisu: 0000016629   
Influence of the anodic oxidation on the physicochemical properties of the Ti6Al4V ELI alloy.
[Aut.]: Wojciech* Chrzanowski, Janusz Szewczenko, Jadwiga** Tyrlik-Held, Jan** Marciniak, Jerzy** Żak.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 163-168, bibliogr. 17 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

implant ; warstwa pasywna ; stop tytanu ; AFM ; XPS ; odporność korozyjna

implant ; passive layer ; titanium alloy ; AFM ; XPS ; corrosion resistance

68/194
Nr opisu: 0000014700   
Integration of the CAD/CAPP/PPC systems.
[Aut.]: Cezary Grabowik, Krzysztof Kalinowski, Zbigniew Monica.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1358-1368, bibliogr. 9 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

CAD ; CAPP ; proces planowania ; proces wielowariantowy ; harmonogramowanie ; zmiana harmonogramu

CAD ; CAPP ; planning process ; multivariant process ; scheduling ; rescheduling

69/194
Nr opisu: 0000016625   
Intermetallic alloys with ceramic particles and technological concept for high loaded materials.
[Aut.]: Bolesław** Formanek, S. Jóźwiak, Bożena Szczucka-Lasota, Anna Dolata-Grosz, Z. Bojar.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 46-51, bibliogr. 28 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

materiały kompozytowe ; koncepcja technologiczna

composite materials

70/194
Nr opisu: 0000014710   
Methodology of the mechanical properties prediction for the metallurgical products from the engineering steels using the Artificial Intelligence methods.
[Aut.]: Leszek** Dobrzański, M. Kowalski, Janusz Madejski.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1500-1509, bibliogr. 14 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

granica plastyczności ; sztuczna sieć neuronowa ; algorytm genetyczny ; sztuczna inteligencja

yield point ; artificial neural network ; genetic algorithm ; artificial intelligence

71/194
Nr opisu: 0000016622   
Microstructure of Ni(Cr)-TiC-Cr3C2-Cr7C3 composite powder.
[Aut.]: G. Dercz, Bolesław** Formanek, K. Prusik, L. Pająk.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 15-19, bibliogr. 21 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

proszek kompozytowy ; związki międzymetaliczne ; analiza dyspersyjna ; analiza Rietvelda ; XRD ; TEM

composite powder ; intermetallics ; dispersion analysis ; Rietveld analysis ; XRD ; TEM

72/194
Nr opisu: 0000014701   
Modeling of manufacturing systems and robot motions.
[Aut.]: Gabriel Kost, Ryszard** Zdanowicz.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1369-1378, bibliogr. 15 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

73/194
Nr opisu: 0000016658   
Modelling and synthesis of discrete-continuous subsystems of machines with damping.
[Aut.]: Andrzej Dymarek, Tomasz Dzitkowski.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1317-1326, bibliogr. 12 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

podatność dynamiczna ; hipergraf

dynamic flexibility ; hypergraph

74/194
Nr opisu: 0000014709   
Modelling of mechanical systems vibrations by utilisation of GRAFSIM software.
[Aut.]: Grzegorz* Wszołek.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1466-1471, bibliogr. 9 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

inżynieria oprogramowania ; układ mechaniczny ; analiza drgań ; modelowanie

software engineering ; mechanical system ; vibration analysis ; modelling

75/194
Nr opisu: 0000014622   
New generation of protective coatings intended for the power industry.
[Aut.]: Bolesław** Formanek, Krzysztof Szymański, Bożena Szczucka-Lasota, A. Włodarczyk.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 850-855, bibliogr. 12 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

powłoka ; natryskiwanie cieplne ; uszczelnienie

coating ; thermal spraying ; sealing

76/194
Nr opisu: 0000019233   
Optimisation of wind turbine blades.
[Aut.]: Mariola Jureczko, Mariusz Pawlak, Arkadiusz Mężyk.
-J. Mater. Process. Technol. 2005 vol. 167 no. 2/3, s. 463-471, bibliogr. 11 poz.. Impact Factor 0.592

elektrownia wiatrowa ; materiały kompozytowe ; analiza elementów skończonych ; optymalizacja

wind power plant ; composite materials ; finite element analysis ; optimization

77/194
Nr opisu: 0000014627   
Oxidation models of the growth of corrosion products on the intermetallic coatings strengthened by a fine dispersive Al2O3.
[Aut.]: Bożena Szczucka-Lasota, Bolesław** Formanek, Adam** Hernas, Krzysztof Szymański.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 935-939, bibliogr. 26 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

faza międzymetaliczna ; odporność na utlenianie ; HVOF

intermetallic phase ; oxidation resistance ; HVOF

78/194
Nr opisu: 0000014703   
Physical and geometrical data acquiring system for vibration analysis software.
[Aut.]: Jerzy Świder, Piotr Michalski, Grzegorz* Wszołek.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1444-1451, bibliogr. 8 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

macierzowy graf hybrydowy ; macierzowy schemat blokowy ; analiza drgań ; inżynieria oprogramowania

matrix hybrid graph ; matrix block diagram ; vibration analysis ; software engineering

79/194
Nr opisu: 0000014705   
Programmable controller designed for electro-pneumatic systems.
[Aut.]: Jerzy Świder, Grzegorz* Wszołek, W. Carvalho.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1459-1465, bibliogr. 8 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

sterownik programowalny ; mikrokontroler ; elektropneumatyka ; automatyka

programmable controller ; microcontroller ; electropneumatics ; automation

80/194
Nr opisu: 0000015070   
Properties of vacuum sintered duplex stainless steels.
[Aut.]: Leszek** Dobrzański, Zbigniew Brytan, M. Grande, M. Rosso, E. Pallavicini.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 286-292, bibliogr. 17 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

stal nierdzewna duplex ; metalurgia proszków ; spiekanie próżniowe

duplex stainless steel ; powder metallurgy ; vacuum sintering

81/194
Nr opisu: 0000015071   
Quality estimation of process with usage control charts type X-R and quality capability of process Cp, Cpk.
[Aut.]: Marta Dudek-Burlikowska.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 736-743, bibliogr. 19 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

sterowanie jakością ; kontrola jakości ; proces produkcyjny ; poprawa jakości

quality steering ; quality control ; production process ; quality improvement

82/194
Nr opisu: 0000016636   
Role of the intermetallic phases in technological process of fixture brasses.
[Aut.]: Marcin Kondracki, Józef** Gawroński, Jan Szajnar.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 332-335, bibliogr. 11 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

odlewanie ; stop miedzi ; twarde wtrącenie ; krystalizacja

casting ; fixture brass ; hard inclusion ; crystallization

83/194
Nr opisu: 0000014691   
Simulation of composite microregions solidification process.
[Aut.]: Mirosław Cholewa.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1175-1180, bibliogr. 19 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

odlewanie ; kompozyt ; dyspersja ; krzepnięcie ; symulacja

casting ; composite ; dispersion ; solidification ; simulation

84/194
Nr opisu: 0000014692   
Simulation of solidification process for composite micro-region with incomplete wetting of reinforcing particle.
[Aut.]: Mirosław Cholewa.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1181-1184, bibliogr. 3 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

odlewanie ; kompozyt ; nawilżanie ; krzepnięcie ; symulacja

casting ; composite ; wetting ; solidification ; simulation

85/194
Nr opisu: 0000016623   
Soft magnetic nanocomposite with powdered metallic ribbon based on cobalt and polymer matrix.
[Aut.]: Leszek** Dobrzański, Ryszard** Nowosielski, A. Przybył, Jarosław Konieczny.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 20-26, bibliogr. 25 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

wysokoenergetyczne mielenie kulowe ; proszek ; kompozyty ; właściwości magnetyczne

high-energy ball milling ; powder ; composites ; magnetic properties

86/194
Nr opisu: 0000016635   
Structure and mechanical properties of DP-type and TRIP-type sheets obtained after the thermomechanical processing.
[Aut.]: Jan** Adamczyk, Adam Grajcar.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 267-274, bibliogr. 21 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

obróbka cieplno-mechaniczna ; blacha typu DP ; blacha typu TRIP ; stal mikrostopowa ; warunki chłodzenia ; DTTT-diagram ; własności mechaniczne

thermomechanical processing ; DP type sheet ; TRIP type sheet ; microalloyed steel ; cooling conditions ; DTTT-diagram ; mechanical properties

87/194
Nr opisu: 0000016637   
Structure and properties of Fe-6.67% C alloy obtained by mechanical alloying.
[Aut.]: Ryszard** Nowosielski, Wirginia Pilarczyk.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 373-378, bibliogr. 16 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

synteza mechaniczna ; stop żelazo-węgiel

mechanical alloying ; iron-carbon alloy

88/194
Nr opisu: 0000014618   
Structure and properties of PVD and CVD coated Al2O3+TiC mixed oxide tool ceramics for dry on high speed cutting processes.
[Aut.]: Leszek** Dobrzański, Jarosław Mikuła.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 822-831, bibliogr. 23 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

ceramika tlenkowa ; Al2O3 ; TiC ; PVD ; CVD ; TEM ; SEM ; mikrotwardość ; scratch test ; pin-on-disc

oxide ceramics ; Al2O3 ; TiC ; PVD ; CVD ; TEM ; SEM ; micro-hardness ; scratch test ; pin-on-disc

89/194
Nr opisu: 0000015151   
Structure and properties of the composite materials consisting of the nanocrystalline Fe73.5Cu1Nb3Si13.5B9 alloy powders and polyethylene.
[Aut.]: Bogusław Ziębowicz, Danuta** Szewieczek, Leszek** Dobrzański, J. Wysłocki, A. Przybył.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 149-155, bibliogr. 20 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

proszek nanokrystaliczny ; kompozyt nanokrystaliczny ; szkło metaliczne ; stop FINEMET ; prasowanie jednostronne jednoosiowe

nanocrystalline powder ; nanocrystalline composite ; metallic glass ; FINEMET alloy ; one-sided uniaxial pressing

90/194
Nr opisu: 0000014614   
Structure and properties of the cutting tools made from cemented carbides and cermets with the TiN+mono-, gradient- or multi(Ti, Al, Si)N+TiN nanocrystalline coatings.
[Aut.]: Leszek** Dobrzański, Klaudiusz Gołombek.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 805-815, bibliogr. 16 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

powłoka gradientowa ; węgliki spiekane ; węglikostale ; PVD ; TEM ; SEM ; powłoka jednowarstwowa ; powłoka wielowarstwowa

gradient coating ; cemented carbides ; cermets ; PVD ; TEM ; SEM ; multilayer coating ; multilayer coating

91/194
Nr opisu: 0000014621   
Structure and properties of wear resistance PVD coatings deposited onto X37CrMoV5-1 type hot work steel.
[Aut.]: Leszek** Dobrzański, Magdalena Polok, Marcin Adamiak.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 843-849, bibliogr. 21 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

powłoka PVD ; mikrotwardość ; struktura ; adhezja ; odporność na zużycie ; X37CrMoV5-1

PVD coating ; micro-hardness ; structure ; adhesion ; wear resistance ; X37CrMoV5-1

92/194
Nr opisu: 0000014711   
Structure, physical properties and fractal character of surface topography of the Ti+TiC coatings on sintered high speed steel.
[Aut.]: Waldemar Kwaśny, Leszek** Dobrzański.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1519-1523, bibliogr. 17 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

powłoka PVD ; geometria fraktalna ; mikrotwardość ; tekstura ; AFM

PVD coating ; fractal geometry ; micro-hardness ; texture ; AFM

93/194
Nr opisu: 0000015127   
Structure, properties and corrosion resistance of PM composite materials based on EN AW-2124 aluminum alloy reinforced with the Al2O3 ceramic particles.
[Aut.]: Leszek** Dobrzański, Anna Włodarczyk, Marcin Adamiak.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 27-32, bibliogr. 20 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

stop aluminium ; materiały kompozytowe ; metalurgia proszków ; odporność korozyjna ; krzywa polaryzacji

aluminium alloy ; composite materials ; powder metallurgy ; corrosion resistance ; polarisation curve

94/194
Nr opisu: 0000014704   
Testing device for electrical car networks.
[Aut.]: Jerzy Świder, Grzegorz* Wszołek, Andrzej Baier, G. Ciupka, O. Winter.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1452-1458, bibliogr. 5 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

wirtualna symulacja ; urządzenie mechatroniczne

virtual simulation ; mechatronic device

95/194
Nr opisu: 0000016626   
The assessment of possibilities for utilisation of composites with thermosetting matrix.
[Aut.]: Jerzy Myalski, Józef** Śleziona.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 96-101, bibliogr. 8 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

kompozyt włókna szklane ; żywica epoksydowa ; odpady ; materiał cierny

glass fibre composite ; epoxy resin ; waste ; friction material

96/194
Nr opisu: 0000014702   
The deadlock protection method used in the production systems.
[Aut.]: Damian Krenczyk, Anna* Dobrzańska-Danikiewicz.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1388-1394, bibliogr. 13 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

rozproszony układ sterowania ; zastój ; graf konturowy

distributed control system ; deadlock ; graph contour

97/194
Nr opisu: 0000015131   
The effect of ductility minimum temperature in CuNi25 alloy.
[Aut.]: Ryszard** Nowosielski, Piotr Sakiewicz, Paweł* Gramatyka.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 379-384, bibliogr. 27 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

niejednorodne odkształcenie ; miedzionikiel ; temperatura minimalnej plastyczności

non-uniform deformation ; cupronickel ; ductility minimum temperature

98/194
Nr opisu: 0000014695   
The expansion of the synthesized structures of mechanical discrete systems represented by polar graphs.
[Aut.]: Andrzej Buchacz.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1277-1280, bibliogr. 11 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

synteza ; nowe struktury

synthesis ; new structures

99/194
Nr opisu: 0000014696   
The method of the production flow synchronisation using the meta-rule conception.
[Aut.]: Anna* Dobrzańska-Danikiewicz, Damian Krenczyk.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1301-1308, bibliogr. 7 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

przepływ produkcji ; synchronizacja ; przebieg przejściowy ; procedura kontroli

production flow ; synchronisation ; transition state ; control procedure

100/194
Nr opisu: 0000016638   
The relationship between hot ductility and intergranular fracture in a CuSn6P alloy at elevated temperatures.
[Aut.]: Wojciech** Ozgowicz.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 392-401, bibliogr. 11 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

temperatura minimalnej plastyczności ; przełom międzykrystaliczny ; poślizg po granicach ziaren

ductility minimum temperature ; intergranular fracture ; grain boundary sliding

101/194
Nr opisu: 0000019234   
The structure and functional properties of PVD and CVD coated Al2O3+ZrO2 oxide tool ceramics.
[Aut.]: Leszek** Dobrzański, Jarosław Mikuła.
-J. Mater. Process. Technol. 2005 vol. 167 no. 2/3, s. 438-446, bibliogr. 26 poz.. Impact Factor 0.592

ceramika tlenkowa ; PVD ; CVD ; Al2O3 ; ZrO2 ; zużycie

oxide ceramics ; PVD ; CVD ; Al2O3 ; ZrO2 ; wear

102/194
Nr opisu: 0000016628   
The structure and properties of sinters produced from composite powders Al-Al2O3-Al3Fe-Al3Ti.
[Aut.]: Józef** Śleziona, Maciej Dyzia, Jerzy Myalski, Jakub Wieczorek.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 127-130, bibliogr. 4 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

ilmenit ; proszek kompozytowy

ilmenite ; composite powder

103/194
Nr opisu: 0000014690   
The study of properties of Ni-W2C and Co-W2C powders thermal sprayed deposits.
[Aut.]: Andrzej Klimpel, Leszek** Dobrzański, Aleksander Lisiecki, Damian Janicki.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1068-1073, bibliogr. 8 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

natryskiwanie cieplne ; płyta ścierna

thermal spraying ; wear plate

104/194
Nr opisu: 0000014634   
The study of properties of Ni-WC wires surfaced deposits.
[Aut.]: Andrzej Klimpel, Leszek** Dobrzański, Aleksander Lisiecki, Damian Janicki.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1046-1055, bibliogr. 8 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

inżynieria powierzchni ; MCAW

surfacing ; MCAW

105/194
Nr opisu: 0000015129   
The usage of The Balanced Scorecard for the estimation of the enterprise's effectiveness.
[Aut.]: Joanna Michalska.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 751-758, bibliogr. 11 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

system zarządzania jakością ; efektywność ; skuteczność ; szacowanie skuteczności ; koszty jakości ; Strategiczna Karta Wyników

quality management system ; efficiency ; effectiveness ; effectiveness estimation ; quality costs ; Balanced Scorecard

106/194
Nr opisu: 0000014697   
The use of networked IPC techniques in hybrid description of a simulation model.
[Aut.]: Krzysztof Foit, Jerzy Świder.
-J. Mater. Process. Technol. 2005 vol. 164/165, s. 1336-1342, bibliogr. 6 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

modelowanie ; symulacja ; komunikacja międzyprocesowa ; IPC

modelling ; simulation ; interprocess communication ; IPC

107/194
Nr opisu: 0000016627   
Ultrasonic methods in diagnostics of epoxy-glass composites.
[Aut.]: Maciej** Rojek, Józef Stabik, Gabriel Wróbel.
-J. Mater. Process. Technol. 2005 vol. 162/163, s. 121-126, bibliogr. 7 poz.
Zawiera materiały z: 8th International Scientific Conference on Advances in Materials & Processing Technologies &13th International Scientific Conference on Achievements in Mechanical & Materials Engineering in the framework of Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Wisła, Poland, 16-19 May 2005. Impact Factor 0.592

kompozyty zbrojone szkłem ; starzenie ; badanie ultradźwiękowe

glass reinforced composites ; ageing ; ultrasonic testing

108/194
Nr opisu: 0000014565   
(Cr, Me)N coatings deposited in a vacuum furnace by magnetron sputtering of a ferrochromium alloy.
[Aut.]: R. Shishkov, I. Dermendjiev, M. Peev, Waldemar Kwaśny, A. Kriz.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 410-414, bibliogr. 15 poz.. Impact Factor 0.578

powłoka PVD ; tekstura ; dyfuzja

PVD coating ; texture ; diffusion

109/194
Nr opisu: 0000015160   
Analysis of complex mechanical systems based on the block diagrams and the matrix hybrid graphs method.
[Aut.]: Jerzy Świder, Grzegorz* Wszołek.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 250-255, bibliogr. 10 poz.. Impact Factor 0.578

analiza ; układ mechaniczny ; schemat blokowy ; macierzowy graf hybrydowy

analysis ; mechanical system ; block diagram ; matrix hybrid graph

110/194
Nr opisu: 0000014583   
Application of high power diode laser (HPDL) for alloying of X40CrMoV5-1 steel surface layer by tungsten carbides.
[Aut.]: Leszek** Dobrzański, Mirosław Bonek, Eugeniusz* Hajduczek, Andrzej Klimpel, Aleksander Lisiecki.
-J. Mater. Process. Technol. 2004 vol. 155/156, s. 1956-1963, bibliogr. 7 poz.. Impact Factor 0.578

stal narzędziowa do pracy na gorąco ; warstwa powierzchniowa ; stopowanie ; laser diodowy dużej mocy

hot-work tool steel ; surface layer ; alloying ; high power diode laser

111/194
Nr opisu: 0000014582   
Application of neural networks for prediction of critical values of temperatures and time of the supercooled austenite transformations.
[Aut.]: Leszek** Dobrzański, Jacek Trzaska.
-J. Mater. Process. Technol. 2004 vol. 155/156, s. 1950-1955, bibliogr. 7 poz.. Impact Factor 0.578

sieć neuronowa ; diagram CCT ; modelowanie

neural network ; CCT diagram ; modelling

112/194
Nr opisu: 0000014548   
Application of neural networks to forecasting the CCT diagrams.
[Aut.]: Leszek** Dobrzański, Jacek Trzaska.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 107-113, bibliogr. 7 poz.. Impact Factor 0.578

sieć neuronowa ; diagram CCT ; modelowanie

neural network ; CCT diagram ; modelling

113/194
Nr opisu: 0000014545   
Computer aided method for evaluation of failure class of materials working in creep conditions.
[Aut.]: Leszek** Dobrzański, Wojciech Sitek, Mariusz Krupiński, J. Dobrzański.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 102-104, bibliogr. 14 poz.. Impact Factor 0.578

trwałość resztkowa ; pełzanie ; stal ; sieć neuronowa ; analiza obrazu

residual life ; creep ; steel ; neural network ; image analysis

114/194
Nr opisu: 0000015156   
Computer-aided synthesis of discrete-continuous subsystems of machines with the assumed frequency spectrum represented by graphs.
[Aut.]: Tomasz Dzitkowski.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 144-149, bibliogr. 11 poz.. Impact Factor 0.578

graf biegunowy ; hipergraf ; wibracja wzdłużna

polar graph ; hypergraph ; longitudinal vibration

115/194
Nr opisu: 0000014568   
Diffusion across PVD coated cermet tool/workpiece interface.
[Aut.]: M. Sokovic, L. Kosec, Leszek** Dobrzański.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 427-433, bibliogr. 17 poz.. Impact Factor 0.578

proces dyfuzyjny ; powłoka PVD

diffusion process ; PVD coating

116/194
Nr opisu: 0000014554   
Effect of depositing the hard surface coatings on properties of the selected cemented carbides and tool cermets.
[Aut.]: Leszek** Dobrzański, Klaudiusz Gołombek, J. Kopac, M. Sokovic.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 304-311, bibliogr. 26 poz.. Impact Factor 0.578

powłoka jednowarstwowa ; powłoka wielowarstwowa ; cermetale narzędziowe ; węglik spiekany ; PVD ; CVD ; badanie skrawalności ; próba zarysowania ; mikrotwardość

single coat ; multilayer coating ; tool cermets ; cemented carbide ; PVD ; CVD ; cutting ability test ; scratch test ; micro-hardness

117/194
Nr opisu: 0000014571   
Effect of thermal treatment on structure of newly developed 47CrMoWVTiCeZr16-26-8 hot-work tool steel.
[Aut.]: Leszek** Dobrzański, Janusz Mazurkiewicz, Eugeniusz* Hajduczek.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 472-484, bibliogr. 10 poz.. Impact Factor 0.578

stal narzędziowa stopowa do pracy na gorąco ; efekt twardości wtórnej ; struktura stali

hot-work tool steel ; secondary hardness effect ; steel structure

118/194
Nr opisu: 0000015138   
Electrochemical corrosion properties of amorphous Fe78Si13B9 alloy.
[Aut.]: Danuta** Szewieczek, Aleksandra* Baron.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 442-445, bibliogr. 11 poz.. Impact Factor 0.578

korozja elektrochemiczna ; materiał na osnowie Fe ; stop amorficzny

electrochemical corrosion ; Fe-based material ; amorphous alloy

119/194
Nr opisu: 0000014557   
Erosion resistance and tribological properties of coatings deposited by reactive magnetron sputtering method onto the brass substrate.
[Aut.]: Leszek** Dobrzański, Krzysztof Lukaszkowicz.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 317-323, bibliogr. 11 poz.. Impact Factor 0.578

powłoka PVD ; trybologia ; próba zarysowania

PVD coating ; tribology ; scratch test

120/194
Nr opisu: 0000014558   
Fabrication methods and heat treatment conditions effect on tribological properties of high speed steels.
[Aut.]: Leszek** Dobrzański, Grzegorz Matula, A. Varez, B. Levenfeld, J. Torralba.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 324-330, bibliogr. 13 poz.. Impact Factor 0.578

stal szybkotnąca ; formowanie bezciśnieniowe ; metalurgia proszków ; spiekanie ; trybologia

high speed steel ; pressureless forming ; powder metallurgy ; sintering ; tribology

121/194
Nr opisu: 0000014551   
Fractal nature of surface topography and physical properties of the coatings obtained using magnetron sputtering.
[Aut.]: Waldemar Kwaśny, Leszek** Dobrzański, Mirosława Pawlyta, W. Gulbinski.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 188-193, bibliogr. 23 poz.. Impact Factor 0.578

geometria fraktalna ; powłoka PVD ; mikrotwardość ; chropowatość

fractal geometry ; PVD coating ; micro-hardness ; roughness

122/194
Nr opisu: 0000014185   
High-temperature chlorine-sulfur corrosion of heat-resisting steels.
[Aut.]: Adam** Hernas, M. Imosa, Bolesław** Formanek, J. Cizner.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 348-353, bibliogr. 8 poz.. Impact Factor 0.578

korozja chlorkowa ; korozja siarkowa ; stal wysokowytrzymała ; analiza rentgenowska

chloride corrosion ; sulfur corrosion ; high strength steel ; X-ray analysis

123/194
Nr opisu: 0000015152   
Hypergraphs and their subgraphs in modelling and investigation of robots.
[Aut.]: Andrzej Buchacz.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 37-44, bibliogr. 26 poz.. Impact Factor 0.578

belka ; belka cienkościenna

beam ; thin walled beam ; lengthwisely-flexibly-torsionally vibrating mechanical system

124/194
Nr opisu: 0000014584   
Improvement of wear resistance of hot work steels by PVD coatings deposition.
[Aut.]: Leszek** Dobrzański, Magdalena Polok, P. Panjan, S. Bugliosi, Marcin Adamiak.
-J. Mater. Process. Technol. 2004 vol. 155/156, s. 1995-2001, bibliogr. 7 poz.. Impact Factor 0.578

powłoka PVD ; stal do pracy na gorąco ; odporność na zużycie ; pin-on-disc

PVD coating ; hot-work steel ; wear resistance ; pin-on-disk

125/194
Nr opisu: 0000014586   
Influence of the thermo-mechanical treatment parameters on the inhomogeneity of the austenite structure and mechanical properties of the Cr-Mo steel with Nb, Ti and B microadditions.
[Aut.]: Jan** Adamczyk, Marek Opiela.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 456-461, bibliogr. 11 poz.. Impact Factor 0.578

stal mikrostopowa ; obróbka cieplno-mechaniczna ; zdrowienie dynamiczne ; zdrowienie statyczne ; rekrystalizacja statyczna ; właściwości mechaniczne ; rysoodporność

microalloyed steel ; thermomechanical treatment ; dynamic recovery ; static recovery ; static recrystallization ; mechanical properties ; crack resistance

126/194
Nr opisu: 0000014579   
Magnetic properties and structure of nanocomposites of powder Fe73.5Cu1Nb3Si13.5B9 alloy-polymer type.
[Aut.]: Bogusław Ziębowicz, Danuta** Szewieczek, Leszek** Dobrzański.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 776-780, bibliogr. 19 poz.. Impact Factor 0.578

nanokompozyty ; nanoproszek ; szkło metaliczne ; FINEMET ; nanokrystalizacja ; prasowanie

nanocomposites ; nanopowder ; metallic glass ; FINEMET ; nanocrystallization ; pressing

127/194
Nr opisu: 0000014577   
Magnetic properties of high-energy milled Fe78Si13B9 nanocrystalline powders and powder-based nanocomposites.
[Aut.]: Ryszard** Nowosielski, Leszek** Dobrzański, Paweł* Gramatyka, Stefan** Griner, Jarosław Konieczny.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 755-760, bibliogr. 15 poz.. Impact Factor 0.578

szkło metaliczne ; nanokrystalizacja ; wysokoenergetyczne mielenie kulowe ; nanokompozyty

metallic glass ; nanocrystallization ; high-energy ball milling ; nanocomposites

128/194
Nr opisu: 0000014585   
Mechanically milled AA6061/(Ti3Al)P MMC reinforced with intermetallics - the structure and properties.
[Aut.]: Marcin Adamiak, J. Fogagnolo, E. Ruiz-Navas, Leszek** Dobrzański, J. Torralba.
-J. Mater. Process. Technol. 2004 vol. 155/156, s. 2002-2006, bibliogr. 12 poz.. Impact Factor 0.578

MMC ; związki międzymetaliczne ; mielenie mechaniczne ; wyciskanie na gorąco

MMC ; intermetallics ; mechanical milling ; hot extrusion

129/194
Nr opisu: 0000015153   
Modifications of cascade structures in computer aided design of mechanical continuous vibration bar systems represented by graphs and structural numbers.
[Aut.]: Andrzej Buchacz.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 45-54, bibliogr. 21 poz.. Impact Factor 0.578

charakterystyka dynamiczna ; hipergraf ; układ mechaniczny

dynamical characteristics ; hypergraph ; mechanical system

130/194
Nr opisu: 0000015159   
Object-oriented system for computer aiding of the machines conceptual design process.
[Aut.]: Piotr Ociepka, Jerzy Świder.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 221-227, bibliogr. 7 poz.. Impact Factor 0.578

projekt koncepcyjny ; wnioskowanie na podstawie przypadków ; CBR ; system doradczy

conceptual design ; case-based reasoning ; CBR ; advisory system

131/194
Nr opisu: 0000014575   
Properties and structure of the toroidal magnetically soft cores made from the amorphous strips, powder, and composite materials.
[Aut.]: Leszek** Dobrzański, Ryszard** Nowosielski, Jarosław Konieczny, J. Wysłocki, A. Przybył.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 669-678, bibliogr. 23 poz.. Impact Factor 0.578

szkło metaliczne ; materiał proszkowy ; nanokompozyty ; nanokrystalizacja ; wysokoenergetyczne mielenie kulowe

metallic glass ; powder material ; nanocomposites ; nanocrystallization ; high-energy ball milling

132/194
Nr opisu: 0000014560   
Properties of the wear resistant coatings deposited on the cemented carbides substrates in the cathodic arc evaporation process.
[Aut.]: Klaudiusz Gołombek, Leszek** Dobrzański, M. Sokovic.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 341-347, bibliogr. 8 poz.. Impact Factor 0.578

PVD ; CVD ; powłoka ; węglik spiekany ; test cięcia ; próba zarysowania ; mikrotwardość

PVD ; CVD ; coating ; cemented carbides ; cutting test ; scratch test ; microhardness

133/194
Nr opisu: 0000014578   
Structure and magnetic properties of nanocomposites of nanocrystalline powder-polymer type.
[Aut.]: Danuta** Szewieczek, Leszek** Dobrzański, Bogusław Ziębowicz.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 765-770, bibliogr. 19 poz.. Impact Factor 0.578

nanokompozyty ; nanoproszek ; szkło metaliczne ; FINEMET ; nanokrystalizacja

nanocomposites ; nanopowder ; metallic glass ; FINEMET ; nanocrystallization

134/194
Nr opisu: 0000014574   
Structure and mechanical properties of HSS HS6-5-2- and HS12-1-5-5-type steel produced by modified powder injection moulding process.
[Aut.]: Leszek** Dobrzański, Grzegorz Matula, A. Varez, B. Levenfeld, J. Torralba.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 658-668, bibliogr. 19 poz.. Impact Factor 0.578

stal szybkotnąca ; formowanie wtryskowe proszku ; metalurgia proszków ; spiekanie

high speed steel ; powder injection moulding ; powder metallurgy ; sintering

135/194
Nr opisu: 0000014573   
Structure and properties of composite materials with polymer matrix reinforced Nd-Fe-B hard magnetic nanostructured particles.
[Aut.]: Leszek** Dobrzański, Małgorzata Drak.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 650-657, bibliogr. 21 poz.. Impact Factor 0.578

magnes trwały ; Nd-Fe-B ; materiał magnetyczny

permanent magnet ; Nd-Fe-B ; composite materials

136/194
Nr opisu: 0000014559   
Structure and properties of the multi-component TiAlSiN coatings obtained in the PVD process in the nitride tool ceramics.
[Aut.]: Leszek** Dobrzański, Daniel Pakuła, Eugeniusz* Hajduczek.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 331-340, bibliogr. 26 poz.. Impact Factor 0.578

ceramika azotkowa ; Si3N4 ; powłoka wielowarstwowa ; powłoka wieloskładnikowa ; PVD ; CVD ; TEM ; SEM ; mikrotwardość ; próba zarysowania

nitride ceramics ; Si3N4 ; multi-layer coating ; multi-component coating ; PVD ; CVD ; TEM ; SEM ; micro-hardness ; scratch test ; pin-on-disk

137/194
Nr opisu: 0000014563   
Structure and properties of the Si3N4 nitride ceramics with hard wear resistant coatings.
[Aut.]: Daniel Pakuła, Leszek** Dobrzański, Klaudiusz Gołombek, M. Pancielejko, A. Kriz.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 388-393, bibliogr. 18 poz.. Impact Factor 0.578

ceramika azotkowa ; Si3N4 ; powłoka wielowarstwowa ; CVD ; scratch test ; mikrotwardość

nitride ceramics ; Si3N4 ; multi-layer coating ; CVD ; scratch test ; microhardness

138/194
Nr opisu: 0000014556   
Structure and properties of the Ti+Ti(C,N) coatings obtained in the PVD process on sintered high speed steel.
[Aut.]: Leszek** Dobrzański, Waldemar Kwaśny, Zbigniew Brytan, R. Shishkov, Boris* Tomov.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 312-316, bibliogr. 9 poz.. Impact Factor 0.578

rozpylanie magnetronowe ; powłoka PVD

magnetron sputtering ; PVD coating ; bias potential

139/194
Nr opisu: 0000015137   
Structure and properties of X150CrMo12 steel after PVDM-R by magnetron deposition of chromium nitride coatings with next heat treatment.
[Aut.]: R. Shishkov, M. Jordanov, Waldemar Kwaśny.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 415-421, bibliogr. 16 poz.. Impact Factor 0.578

rozpylanie magnetronowe ; powłoka CrN ; obróbka cieplna ; twardość ; moduł Younga ; współczynnik tekstury

magnetron sputtering ; CrN coating ; heat treatment ; hardness ; Young's modulus ; texture coefficient

140/194
Nr opisu: 0000014562   
Structure, chemical and phase compositions of coatings deposited by reactive magnetron sputtering onto the brass substrate.
[Aut.]: Krzysztof Lukaszkowicz, Leszek** Dobrzański, Adam Zarychta.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 380-387, bibliogr. 6 poz.. Impact Factor 0.578

powłoka PVD ; SEM ; TEM ; XRD ; GDOS ; tekstura

PVD coating ; SEM ; TEM ; XRD ; GDOS ; texture

141/194
Nr opisu: 0000014570   
Study of selected properties of magnesium alloy AZ91 after heat treatment and forming.
[Aut.]: L. Cizek, M. Greger, L. Pawlica, Leszek** Dobrzański, Tomasz Tański.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 466-471, bibliogr. 6 poz.. Impact Factor 0.578

stop magnezu ; spawanie ; obróbka cieplna ; segregacja ; właściwości mechaniczne

magnesium alloy ; casting ; heat treatment ; segregation ; mechanical properties

142/194
Nr opisu: 0000015158   
Swagelining as a method of pipelines rehabilitation.
[Aut.]: Gabriel Wróbel, Małgorzata Szymiczek, Łukasz Wierzbicki.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 637-642, bibliogr. 7 poz.. Impact Factor 0.578

technologia swagelining ; rurociąg ; rehabilitacja

swagelining technology ; pipeline ; rehabilitation

143/194
Nr opisu: 0000092117   
The columnar crystals shape and castings structure cast in magnetic field.
[Aut.]: Jan Szajnar.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 761-764, bibliogr. 10 poz.. Impact Factor 0.578

kryształ słupkowy ; konwekcja wymuszona ; pole magnetyczne

columnar crystal ; forced convection ; magnetic field

144/194
Nr opisu: 0000014576   
The influence of cast method and anodizing parameters on structure and layer thickness of aluminium alloys.
[Aut.]: Jarosław Konieczny, Leszek** Dobrzański, Krzysztof Labisz, J. Duszczyk.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 718-723, bibliogr. 12 poz.. Impact Factor 0.578

anodyzacja ; chropowatość ; zużycie ścierne ; odporność na zużycie ; twardość

anodizing ; roughness ; abrasive wear ; wear resistance ; hardness

145/194
Nr opisu: 0000014553   
The modelling of high-speed steels' properties using neural networks.
[Aut.]: Wojciech Sitek, Leszek** Dobrzański, Jacek Zacłona.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 245-249, bibliogr. 21 poz.. Impact Factor 0.578

stal szybkotnąca ; sieć neuronowa ; twardość wtórna ; modelowanie

high speed steel ; neural network ; secondary hardness ; modelling

146/194
Nr opisu: 0000015154   
The requirements and possibilities balance method used for production planning in the manufacturing assembly systems.
[Aut.]: Anna* Dobrzańska, Bożena Skołud.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 91-101, bibliogr. 8 poz.. Impact Factor 0.578

planowanie produkcji ; system montażowy

production planning ; assembly system

147/194
Nr opisu: 0000015155   
The sensitivity as a criterion of synthesis of discrete vibrating fixed mechanical system.
[Aut.]: Andrzej Dymarek.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 138-143, bibliogr. 8 poz.. Impact Factor 0.578

graf ; liczby strukturalne ; mobilność ; bezruch

graph ; structural numbers ; mobility ; immobility

148/194
Nr opisu: 0000014581   
The structure and magnetic properties of magnetically soft cobalt base nanocrystalline powders and nanocomposites with silicon binding.
[Aut.]: Leszek** Dobrzański, Ryszard** Nowosielski, Jarosław Konieczny.
-J. Mater. Process. Technol. 2004 vol. 155/156, s. 1943-1949, bibliogr. 21 poz.. Impact Factor 0.578

szkło metaliczne ; nanokrystalizacja ; wysokoenergetyczne mielenie kulowe ; właściwości magnetyczne

metallic glass ; nanocrystallization ; high-energy ball milling ; magnetic properties

149/194
Nr opisu: 0000015073   
The structure and magnetoelastic properties of the Fe-based amorphous alloy with Hf addition.
[Aut.]: Sabina Lesz, R. Szewczyk, Danuta** Szewieczek, A. Bieńkowski.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 743-748, bibliogr. 24 poz.. Impact Factor 0.578

stop amorficzny ; właściwości magnetosprężyste ; obróbka cieplna

amorphous alloy ; magnetoelastic properties ; heat treatment

150/194
Nr opisu: 0000015139   
The structure and selected physical properties of the nanocrystalline Fe92.4Hf4.2B3.4 alloy.
[Aut.]: Danuta** Szewieczek, Sabina Lesz.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 771-775, bibliogr. 9 poz.. Impact Factor 0.578

stop nanokrystaliczny ; właściwości fizyczne ; obróbka cieplna

nanocrystalline alloy ; physical properties ; heat treatment

151/194
Nr opisu: 0000015132   
Thermal analysis of vacancy defects in quenched tin bronze-α.
[Aut.]: Wojciech** Ozgowicz.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 590-595, bibliogr. 12 poz.. Impact Factor 0.578

analiza termiczna ; wakans ; cyna ; brąz

thermal analysis ; vacancy defect ; tin ; bronze

152/194
Nr opisu: 0000014561   
Ti+TiN, Ti+Ti(CxN1-x), Ti+TiC PVD coatings on the ASP 30 sintered high-speed steel.
[Aut.]: Waldemar Kwaśny, Leszek** Dobrzański, S. Bugliosi.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 370-379, bibliogr. 27 poz.. Impact Factor 0.578

powłoka PVD ; mikrotwardość ; adhezja ; odporność na erozję

PVD coating ; microhardness ; adhesion ; erosion resistance

153/194
Nr opisu: 0000015135   
Usefulness of passive-carbon layer for implants applied in interventional cardiology.
[Aut.]: Zbigniew Paszenda, Jadwiga** Tyrlik-Held, Z. Nawrat, Jerzy** Żak, K. Wilczek.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 399-404, bibliogr. 29 poz.. Impact Factor 0.578

stent wieńcowy ; warstwa pasywno-węglowa ; stal Cr-Ni-Mo ; korozja ; badanie zmęczeniowe ; mikroskopia sił atomowych

coronary stent ; passive-carbon layer ; Cr-Ni-Mo steel ; corrosion ; fatigue test ; atomic force microscopy

154/194
Nr opisu: 0000015162   
Vibration analysis of the excavator model in GRAFSIM program on the basis of a block diagram method.
[Aut.]: Grzegorz* Wszołek.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 268-273, bibliogr. 8 poz.. Impact Factor 0.578

analiza ; układ mechaniczny ; schemat blokowy ; macierzowy graf hybrydowy

analysis ; mechanical system ; block diagram ; matrix hybrid graph

155/194
Nr opisu: 0000015161   
Vibration analysis software based on a matrix hybrid graph transformation into a structure of a block diagram method.
[Aut.]: Jerzy Świder, Grzegorz* Wszołek.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 256-261, bibliogr. 9 poz.. Impact Factor 0.578

analiza wibracyjna ; oprogramowanie ; układ mechaniczny ; schemat blokowy ; macierzowy graf hybrydowy

vibration analysis ; software ; mechanical system ; block diagram ; matrix hybrid graph

156/194
Nr opisu: 0000014566   
Wear of PVD-coated solid carbide end mills in dry high-speed cutting.
[Aut.]: M. Sokovic, J. Kopac, Leszek** Dobrzański, Marcin Adamiak.
-J. Mater. Process. Technol. 2004 vol. 157/158, s. 422-426, bibliogr. 11 poz.. Impact Factor 0.578

zużycie narzędzi ; powłoka PVD ; obróbka szybkościowa

tool wear ; PVD coating ; high speed cutting

157/194
Nr opisu: 0000008290   
Economical non-ledeburitic tool alloys - alloying philosophy, structure and properties.
[Aut.]: Jan Cwajna, Janusz Richter, Janusz Szala.
-J. Mater. Process. Technol. 2003 vol. 133 iss. 1/2, s. 39-43. Impact Factor 0.450

materiały narzędziowe ; cząstki węglika

tool materials ; carbide particles

158/194
Nr opisu: 0000008289   
Eulogy connected with granting Professor Marcel Hubert Van de Voorde the honorary award in the name of Professor Fryderyk Staub for year 1997 for achievements in promoting of the Polish science and higher education on the international arena and for achievements in collaboration with the Polish scientific community.
[Aut.]: Leszek** Dobrzański.
-J. Mater. Process. Technol. 2003 vol. 133 iss. 1/2, s. 5-6. Impact Factor 0.450

159/194
Nr opisu: 0000011191   
Properties of the multi-layer Ti/CrN and Ti/TiAlN coatings deposited with the PVD technique onto the brass substrate.
[Aut.]: Leszek** Dobrzański, Krzysztof Lukaszkowicz, A. Kriz.
-J. Mater. Process. Technol. 2003 vol. 143, s. 832-837. Impact Factor 0.450

powłoka PVD ; korozja ; próba zarysowania ; współczynnik tarcia ; GDOS

PVD coating ; corrosion ; scratch test ; friction coefficient ; GDOS

160/194
Nr opisu: 0000008280   
Recollection of Professor Fryderyk Staub, doctor Honoris Causa of the Silesian Technical University, creator of the "Silesian Scientific Physical Metallurgy School".
[Aut.]: Leszek** Dobrzański.
-J. Mater. Process. Technol. 2003 vol. 133 iss. 1/2, s. 3-4. Impact Factor 0.450

161/194
Nr opisu: 0000008291   
Structure and properties of the TiN and Ti (C, N) coatings deposited in the PVD process on high-speed steels.
[Aut.]: Leszek** Dobrzański, Marcin Adamiak.
-J. Mater. Process. Technol. 2003 vol. 133 iss. 1/2, s. 50-62. Impact Factor 0.450

powłoka TiN ; Ti(C,N) ; PVD ; stal szybkotnąca ; struktura ; właściwości ; adhezja ; zużycie erozyjne

TiN coating ; Ti(C,N) ; PVD ; high-speed steel ; structure ; properties ; adhesion ; erosion wear

162/194
Nr opisu: 0000008279   
The effect of silicon, vanadium and nitrogen on the microstructure and hardness of air cooled medium carbon low alloy steels.
[Aut.]: V. Ollilainen, Wojciech* Kasprzak, L. Holappa.
-J. Mater. Process. Technol. 2003 vol. 134 iss. 3, s. 405-412. Impact Factor 0.450

stal HSLA ; stop krzemu ; stop wanadu ; stop tytanu ; umacnianie wydzieleniowe ; rozmiar ziarna byłego austenitu ; chłodzenie powietrzem ; twardość ; mikrotwardość

HSLA steel ; silicon alloy ; vanadium alloy ; titanium alloy ; prior austenite grain size ; air cooling ; hardness ; microhardness

163/194
Nr opisu: 0000008292   
The method of knowledge representation for a CAPP system.
[Aut.]: Cezary Grabowik, Ryszard* Knosala.
-J. Mater. Process. Technol. 2003 vol. 133 iss. 1/2, s. 90-98. Impact Factor 0.450

system ekspercki ; reprezentacja wiedzy ; CAPP

expert system ; knowledge representation ; CAPP

164/194
Nr opisu: 0000007092   
A production scheduling problem using genetic algorithm.
[Aut.]: Ryszard* Knosala, Tomasz* Wal.
-J. Mater. Process. Technol. 2001 vol. 109 iss. 1/2, s. 90-95. Impact Factor 0.255

165/194
Nr opisu: 0000007109   
Analysis of thermal processes in solidifying casting using the combined variant of the BEM.
[Aut.]: Ewa Majchrzak, Romuald* Szopa.
-J. Mater. Process. Technol. 2001 vol. 109 iss. 1/2, s. 126-132. Impact Factor 0.255

166/194
Nr opisu: 0000007112   
Changes of mechanical properties and fracture morphology of amorphous tapes involved by heat treatment.
[Aut.]: Danuta** Szewieczek, Jadwiga** Tyrlik-Held, Sabina Lesz.
-J. Mater. Process. Technol. 2001 vol. 109 iss. 1/2, s. 190-195. Impact Factor 0.255

167/194
Nr opisu: 0000007089   
Comparison of the thermal fatique resistance and structure of the 47CrMoWVTiCeZr16-26-8 hot-work tool steel with X40CrMoV5-1 type one.
[Aut.]: Leszek** Dobrzański, Janusz Mazurkiewicz, Eugeniusz* Hajduczek, Janusz Madejski.
-J. Mater. Process. Technol. 2001 vol. 113 iss. 1/3, s. 527-538. Impact Factor 0.255

168/194
Nr opisu: 0000007111   
Ductility minimum temperature in selected mono-phase, binary brasses.
[Aut.]: Ryszard** Nowosielski.
-J. Mater. Process. Technol. 2001 vol. 109 iss. 1/2, s. 142-153. Impact Factor 0.255

169/194
Nr opisu: 0000007077   
Dynamic elastic-plastic analysis of 3D deformation in abrasive waterjet machining.
[Aut.]: A. Hassan, Jan** Kosmol.
-J. Mater. Process. Technol. 2001 vol. 113 iss. 1/3, s. 337-341. Impact Factor 0.255

170/194
Nr opisu: 0000007078   
Effect of the deposition parameters on the properties of the two-layer surface coatings obtained using magnetron sputtering.
[Aut.]: Leszek** Dobrzański, Waldemar Kwaśny, R. Shishkov, Janusz Madejski.
-J. Mater. Process. Technol. 2001 vol. 113 iss. 1/3, s. 493-501. Impact Factor 0.255

171/194
Nr opisu: 0000007091   
Special issue - 6th International Scientific Conference: Achivements in Mechanical and Materials Engineering - Preface.
[Aut.]: Leszek** Dobrzański.
-J. Mater. Process. Technol. 2001 vol. 109 iss. 1/2, s. 1

172/194
Nr opisu: 0000007114   
The economic aspects of the implementation of a quality system process in Polish enterprises.
[Aut.]: Stanisław* Tkaczyk, Joanna Jagła.
-J. Mater. Process. Technol. 2001 vol. 109 iss. 1/2, s. 196-205. Impact Factor 0.255

173/194
Nr opisu: 0000006297   
A new model describing the hot stress-strain curves of HSLA steel at high deformation.
[Aut.]: I. Schindler, Eugeniusz Hadasik.
-J. Mater. Process. Technol. 2000 vol. 106 iss. 1/3, s. 131-135, bibliogr. 22 poz.. Impact Factor 0.237

174/194
Nr opisu: 0000006870   
Agents as building blocks of responsibility-based manufacturing systems.
[Aut.]: Janusz Madejski.
-J. Mater. Process. Technol. 2000 vol. 106 iss. 1/3, s. 219-222. Impact Factor 0.237

175/194
Nr opisu: 0000006868   
Application of the boundary element method for the numerical modelling of the solidification of cylindrical and spherical castings.
[Aut.]: Ewa Majchrzak, Bohdan* Mochnacki.
-J. Mater. Process. Technol. 2000 vol. 106 iss. 1/3, s. 99-106. Impact Factor 0.237

176/194
Nr opisu: 0000006869   
Development problems of materials in mechanical engineering.
[Aut.]: Adolf** Maciejny.
-J. Mater. Process. Technol. 2000 vol. 106 iss. 1/3, s. 184-190. Impact Factor 0.237

177/194
Nr opisu: 0000006867   
Flow-stress functions for the computer simulation of metal forming.
[Aut.]: Franciszek** Grosman.
-J. Mater. Process. Technol. 2000 vol. 106 iss. 1/3, s. 45-48. Impact Factor 0.237

178/194
Nr opisu: 0000006298   
Relationship between erosion resistance and the phase and chemical composition of PVD coatings deposited onto high-speed steel.
[Aut.]: Leszek** Dobrzański, Marcin Adamiak, G. D'Errico.
-J. Mater. Process. Technol. 1999 vol. 92/93, s. 184-189. Impact Factor 0.196

179/194
Nr opisu: 0000026882   
Application of a flow stress function in programmes for computer simulation of plastic working processes.
[Aut.]: Franciszek** Grosman.
-J. Mater. Process. Technol. 1997 vol. 64 iss. 1/3, s. 169-180, bibliogr. 8 poz.

180/194
Nr opisu: 0000026860   
Boron-treated microalloyed quenched and tempered plates, their structure and properties.
[Aut.]: Jan** Adamczyk, Wojciech** Ozgowicz, Roman** Wusatowski, Elżbieta** Kalinowska-Ozgowicz, Ryszard** Grzyb.
-J. Mater. Process. Technol. 1997 vol. 64 nr 1/3, s. 1-8, bibliogr. 4 poz.

181/194
Nr opisu: 0000026857   
Comparison of hardenability calculation methods of the heat-treatable constructional steels.
[Aut.]: Leszek** Dobrzański, Wojciech Sitek.
-J. Mater. Process. Technol. 1997 vol. 64 nr 1/3, s. 117-126, bibliogr. 37 poz.

182/194
Nr opisu: 0000026855   
Forging on the four-lever arms swaging machines.
[Aut.]: Ryszard** Hebdzyński, Stanisław* Kajzer, Roman* Kozik.
-J. Mater. Process. Technol. 1997 vol. 64 nr 1/3, s. 199-206, bibliogr. 14 poz.

183/194
Nr opisu: 0000026856   
Group technology using neural nets.
[Aut.]: Aleksander Gwiazda, Ryszard* Knosala.
-J. Mater. Process. Technol. 1997 vol. 64 nr 1/3, s. 181-188, bibliogr. 5 poz.

184/194
Nr opisu: 0000026851   
Heterogeneity of strengthening of the thick-walled copper square tubes in a process of rolling in a four-roll pass.
[Aut.]: Tomasz** Oczkowicz, Stanisław* Tkaczyk.
-J. Mater. Process. Technol. 1997 vol. 64 nr 1/3, s. 303-310, bibliogr. 22 poz.

185/194
Nr opisu: 0000026849   
Hobbing as finishing machining of the hard teeth.
[Aut.]: Zygmunt* Stachurski, Henryk** Słupik.
-J. Mater. Process. Technol. 1997 vol. 64 nr 1/3, s. 353-358, bibliogr. 6 poz.

186/194
Nr opisu: 0000026848   
Influence of passivation process on the corrosion resistance of amorphous tapes.
[Aut.]: Danuta** Szewieczek, Jadwiga** Tyrlik-Held, Zbigniew Paszenda, A. Zymla.
-J. Mater. Process. Technol. 1997 vol. 64 nr 1/3, s. 371-378, bibliogr. 10 poz.

187/194
Nr opisu: 0000026852   
Modelling of Fe-C alloys solidification using the artificial heat source method.
[Aut.]: Bohdan* Mochnacki, Ewa Majchrzak, E. Pawlak, J. Suchy.
-J. Mater. Process. Technol. 1997 vol. 64 nr 1/3, s. 293-302, bibliogr. 13 poz.

188/194
Nr opisu: 0000026854   
Orbital forming of an oxygen cylinder web.
[Aut.]: Elżbieta** Kalinowska-Ozgowicz, Wojciech** Krukiewicz, Leszek** Kowalski, Roman* Kozik, Józef** Rabus, Jerzy* Szota.
-J. Mater. Process. Technol. 1997 vol. 64 nr 1/3, s. 215-222, bibliogr. 5 poz.

189/194
Nr opisu: 0000026858   
Role of Ti in the W-Mo-V high-speed steels.
[Aut.]: Leszek** Dobrzański, Mariusz Ligarski.
-J. Mater. Process. Technol. 1997 vol. 64 nr 1/3, s. 101-116, bibliogr. 27 poz.

190/194
Nr opisu: 0000026859   
Structure and properties of W-Mo-V-Co 11-0-2-5 type and W-Mo-V 11-0-2 type high-speed steels.
[Aut.]: Leszek** Dobrzański, Wojciech* Kasprzak, Adam Zarychta, Mariusz Ligarski, Janusz Mazurkiewicz.
-J. Mater. Process. Technol. 1997 vol. 64 nr 1/3, s. 93-99, bibliogr. 19 poz.

191/194
Nr opisu: 0000026850   
The method of the knowledge representation in an expert system for metal cutting engineering.
[Aut.]: Alfred* Paszek, Ryszard* Knosala.
-J. Mater. Process. Technol. 1997 vol. 64 nr 1/3, s. 319-326, bibliogr. 8 poz.

192/194
Nr opisu: 0000026853   
The numerical micro/macro model of solidification process.
[Aut.]: Ewa Majchrzak, Alicja Piasecka.
-J. Mater. Process. Technol. 1997 vol. 64 nr 1/3, s. 267-276, bibliogr. 10 poz.

193/194
Nr opisu: 0000035385   
Metal flow in the deformation gap at primary swaging.
[Aut.]: Franciszek** Grosman, Antoni** Piela.
-J. Mater. Process. Technol. 1996 vol. 56 iss. 1/4, s. 404-411

194/194
Nr opisu: 0000033469   
Steel wire galvanizing by the VERT-DOWN method.
[Aut.]: Jerzy* Szota.
-J. Mater. Process. Technol. 1995 vol. 55 iss. 3/4, s. 134-139

stosując format:
Nowe wyszukiwanie